Jump to content

fearby

Members
 View Profile  See their activity

  • Posts

    46

  • Joined

  • Last visited

 Content Type 

Posts posted by fearby

  4. Installing the 2.6 Kernel

    in Tips and Tricks

    Posted · Edited by fearby

    I use the urpmi method but keep getting the message:

     

    Installation failed:

    glibc_lsb is needed by lsb-1.3-6.1mdk

    XFree86-libs == 4.3-5mdk is needed by XFree86-devel-4.3-5mdk

     

     

    How do I fix this?

    Tried getting XFree86-libs 4.3-5mdk and the glibc-lsb rpm installing them to var/cache/urpmi/rpms/ but still same message.

  8. Building Window Manager Sessions then boot fails

    in Installing Mandriva

    Posted

    Thanks for answering.

    Had Mandrake 9.1 running fine but thought I would install 9.2 fresh.

     

    Asus P4PE mainboard

    Seagate Barracuda HDD

    Leadtek Winfast Ti 4200 video card

     

    The only differences between this setup and my initial 9.1 setup are:

     

    Asus USB 6 in 1 card reader which I thought was the problem but still had trouble when I disconnected it

     

    Nebula Digital TV card (BT 878 chip)

     

    Sony Ericsson P800 USB cradle for my new phone.

     

    Could it be one of these that is doing the dirty on me?

     

    :help:

  10. Help me install my DVB card

    in Hardware

    Posted

    Trying to get my Nebula TV PCI card to work

    http://www.nebula-electronics.com/informat...o.asp?Code=0001

    but need to setup to connect to CVS tree and make sure my kernel has the necessary stuff enabled.

    Can anyone explain how to do these two things?

    You must have the kernel sources for the kernel you are actually using

    installed, and symlinked to /lib/modules/$(KERNEL_VERSION)/build.

    Otherwise, change the path for KERNEL_LOCATION in

    DVB/driver/Makefile.

     

    - Make sure that your kernel has enabled:

     

    Video4Linux Support (CONFIG_VIDEO_DEV)

    needed by cards with integrated MPEG decoder to display video on screen

     

    Input Core Support (CONFIG_INPUT)

    Event Device Support (CONFIG_INPUT_EVDEV)

    needed by the DVB remote control driver

     

    Thanks :?:

  11. USB multi-card reader - how do I mount it?

    in Hardware

    Posted

    T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2

    B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0

    D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1

    P: Vendor=0000 ProdID=0000 Rev= 0.00

    S: Product=USB UHCI Root Hub

    S: SerialNumber=d000

    C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA

    I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub

    E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms

    T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0

    D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1

    P: Vendor=0b05 ProdID=1101 Rev= 0.12

    S: Manufacturer=----- Ltd.

    S: Product=SPRING-Rev1.1

    S: SerialNumber=102090501926

    C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA

    I: If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage

    E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms

    E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms

    E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=10ms

    T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2

    B: Alloc=104/900 us (12%), #Int= 2, #Iso= 0

    D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1

    P: Vendor=0000 ProdID=0000 Rev= 0.00

    S: Product=USB UHCI Root Hub

    S: SerialNumber=d400

    C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA

    I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub

    E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms

    T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0

    D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1

    P: Vendor=045e ProdID=0040 Rev= 1.21

    S: Manufacturer=Microsoft

    S: Product=Microsoft Wheel Mouse Optical®

    C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA

    I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=hid

    E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=10ms

    T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=12 MxCh= 4

    D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1

    P: Vendor=0451 ProdID=2046 Rev= 1.25

    C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA

    I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub

    E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=255ms

    T: Bus=02 Lev=02 Prnt=03 Port=01 Cnt=01 Dev#= 4 Spd=12 MxCh= 0

    D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1

    P: Vendor=03f0 ProdID=1604 Rev= 1.00

    S: Manufacturer=Hewlett-Packard

    S: Product=DeskJet 940C

    S: SerialNumber=HU21I6N03CBH

    C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA

    I: If#= 0 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=usblp

    E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms

    E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms

    T: Bus=02 Lev=02 Prnt=03 Port=03 Cnt=02 Dev#= 5 Spd=12 MxCh= 0

    D: Ver= 1.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS= 8 #Cfgs= 1

    P: Vendor=046d ProdID=0850 Rev= 1.00

    S: Product=Camera

    C:* #Ifs= 3 Cfg#= 1 Atr=80 MxPwr=100mA

    I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=quickcam

    E: Ad=81(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms

    E: Ad=82(I) Atr=03(Int.) MxPS= 1 Ivl=16ms

    I: If#= 0 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=quickcam

    E: Ad=81(I) Atr=01(Isoc) MxPS=1023 Ivl=1ms

    E: Ad=82(I) Atr=03(Int.) MxPS= 1 Ivl=16ms

    I: If#= 1 Alt= 0 #EPs= 0 Cls=01(audio) Sub=01 Prot=00 Driver=(none)

    I: If#= 2 Alt= 0 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=(none)

    E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms

    I: If#= 2 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=(none)

    E: Ad=83(I) Atr=01(Isoc) MxPS= 100 Ivl=1ms

    T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2

    B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0

    D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1

    P: Vendor=0000 ProdID=0000 Rev= 0.00

    S: Product=USB UHCI Root Hub

    S: SerialNumber=d800

    C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA

    I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub

    E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms

    T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0

    D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1

    P: Vendor=0731 ProdID=0528 Rev= 0.01

    C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA

    I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)

    E: Ad=81(I) Atr=03(Int.) MxPS= 10 Ivl=1ms

    E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms

    E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms

     

    also I now have a device called removable in mnt/dev after booting with the CF card in - cannot see its contents though.

     

    Thanks

  13. USB multi-card reader - how do I mount it?

    in Hardware

    Posted

    Have an Asus multicard reader (CF,smartmedia,memory stick) - is it possible to use it in Mandrake 9.1?

    Have looked at linux-usb.org but it is a bit beyond me.Here is the info:

     

    C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA

    I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub

    E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms

    T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0

    D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1

    P: Vendor=0b05 ProdID=1101 Rev= 0.12

    S: Manufacturer=----- Ltd.

    S: Product=SPRING-Rev1.1

    S: SerialNumber=102090501926

     

     

    :?:

  20. Cannot install an RPM - URPMI seems broken....

    in Installing Mandriva

    Posted

    What am I missing here?

    I downloaded the java vm rpm from Sun's site and when I try to install it I get the console message:

     

    unable to take medium "Updates for Mandrake Linux 9.1 (ftp1u)" into account as no list file [/var/lib/urpmi/list.Updates for Mandrake Linux 9.1 (ftp1u)] exists

    Everything already installed

     

    How can I sort this out?

     

    Thanks

×
×
  • Create New...