deathkrush
-
Posts
20 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by deathkrush
-
-
OK, I just installed iptables and here is what it gives me:
[root@toshiba stan]# iptables -nvL Chain INPUT (policy ACCEPT 5655 packets, 572K bytes) pkts bytes target prot opt in out source destination Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 6032 packets, 691K bytes) pkts bytes target prot opt in out source destination [root@toshiba stan]# iptables -nvL -t nat Chain PREROUTING (policy ACCEPT 165 packets, 9096 bytes) pkts bytes target prot opt in out source destination Chain POSTROUTING (policy ACCEPT 862 packets, 56275 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 862 packets, 56275 bytes) pkts bytes target prot opt in out source destination [root@toshiba stan]#
Oh and webmin works fine, it's a nice application!
-
Any chance of connecting directly to your router by cable, thus ruling out/narrowing it down to the wireless connection?
Also, can you post a detailed description of your network, ie what connects to what, through what etc (if that makes sense!)
Please also post:
Contents of /etc/resolv.conf
Output of "iptables -nvL"
Output of "iptables -nvL -t nat"
Output of "ps aux"
Output of "route -n"
Yes, I have tried it through a cable directly to my router, I disabled wireless just to make sure. Didn't help much, I am still getting the same error.
Basically I have this all-in-one Linksys router (hub/gateway/router/wireless) that connects to a cable modem. I have one laptop (this exact machine where I'm experiencing the problem) connected through wireless and 3 desktops connected through cable.
cat /etc/resolv.conf nameserver 204.127.198.19 nameserver 63.240.76.19 # ppp temp entry
(These are the exact DNS servers I have on my other machines.)
iptables bash: iptables: command not found
(Hmm, this used to work before?!? I don't know what happened to it)
ps aux USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 1 0.3 0.1 1580 516 ? S 22:25 0:03 init [5] root 2 0.0 0.0 0 0 ? SWN 22:25 0:00 [ksoftirqd/0] root 3 0.0 0.0 0 0 ? SW< 22:25 0:00 [events/0] root 4 0.0 0.0 0 0 ? SW< 22:25 0:00 [kblockd/0] root 5 0.0 0.0 0 0 ? SW 22:25 0:00 [pdflush] root 6 0.0 0.0 0 0 ? SW 22:25 0:00 [pdflush] root 7 0.0 0.0 0 0 ? SW 22:25 0:00 [kswapd0] root 8 0.0 0.0 0 0 ? SW< 22:25 0:00 [aio/0] root 10 0.0 0.0 0 0 ? SW 22:25 0:00 [kseriod] root 14 0.0 0.0 0 0 ? SW 22:25 0:00 [kjournald] root 120 0.0 0.2 2168 1340 ? S 22:25 0:00 devfsd /dev root 246 0.0 0.0 0 0 ? SW 22:25 0:00 [khubd] root 576 0.0 0.0 0 0 ? SW 22:25 0:00 [kjournald] root 750 0.0 0.0 0 0 ? SW 22:25 0:00 [knodemgrd_0] root 806 0.0 0.6 5168 3556 ? S< 22:25 0:00 webconfd root 807 0.7 0.0 0 0 ? SW< 22:25 0:06 [kdldrd/dpc] root 808 0.0 0.0 0 0 ? SW< 22:25 0:00 [kdldrd/wrk] root 949 0.0 0.0 0 0 ? SW< 22:25 0:00 [kdldrd/eth1] root 1189 0.0 0.0 0 0 ? SW 22:25 0:00 [pccardd] root 1198 0.0 0.1 1728 708 ? S 22:25 0:00 /sbin/cardmgr rpc 1474 0.0 0.1 1712 580 ? S 22:26 0:00 portmap root 1498 0.0 0.1 1880 804 ? S 22:26 0:00 syslogd -m 0 root 1506 0.0 0.2 2604 1540 ? S 22:26 0:00 klogd -2 root 1565 0.0 0.1 1880 856 ? S 22:26 0:00 rpc.statd xfs 1978 0.0 0.9 6664 4692 ? S 22:26 0:00 xfs -port -1 -dae root 2012 0.0 0.0 0 0 ? SW 22:26 0:00 [rpciod] root 2013 0.0 0.0 0 0 ? SW 22:26 0:00 [lockd] daemon 2094 0.0 0.1 1616 536 ? S 22:26 0:00 /usr/sbin/atd root 2121 0.0 0.1 1584 604 ? S 22:26 0:00 /usr/sbin/acpid root 2153 0.0 0.1 2688 692 ? S 22:26 0:00 /usr/bin/mdkkdm - root 2171 2.9 2.8 48844 14652 ? SL 22:26 0:25 /etc/X11/X -defer root 2212 0.0 0.2 2224 1084 ? S 22:26 0:00 /bin/sh /usr/lib/ root 2213 0.0 0.2 2224 1096 ? S 22:26 0:00 /bin/sh /usr/lib/ root 2214 2.1 0.6 6060 3576 ? S 22:26 0:18 /usr/lib/ipsec/pl root 2215 0.0 0.2 2196 1056 ? S 22:26 0:00 /bin/sh /usr/lib/ root 2216 0.0 0.0 1564 392 ? S 22:26 0:00 logger -s -p daem root 2297 0.0 0.3 3600 1696 ? S 22:26 0:00 -:0 root 2346 0.0 0.1 2028 716 ? S 22:26 0:00 _pluto_adns root 2347 0.0 0.2 3152 1416 ? S 22:26 0:00 /usr/sbin/sshd root 2468 0.0 0.1 2168 832 ? S 22:26 0:00 xinetd -stayalive root 2566 0.0 0.4 5616 2352 ? S 22:26 0:00 cupsd root 2567 0.0 0.0 1644 468 ? S 22:26 0:00 _pluto_adns root 2568 0.0 0.0 1644 468 ? S 22:26 0:00 _pluto_adns root 2569 0.0 0.0 1644 468 ? S 22:26 0:00 _pluto_adns root 2575 0.0 0.0 1644 468 ? S 22:26 0:00 _pluto_adns root 2576 0.0 0.0 1644 468 ? S 22:26 0:00 _pluto_adns root 2577 0.0 0.0 1644 468 ? S 22:26 0:00 _pluto_adns root 2578 0.0 0.0 1644 468 ? S 22:26 0:00 _pluto_adns root 2725 0.0 0.1 1756 668 ? S 22:26 0:00 rpc.mountd --no-n root 2816 0.0 0.1 1688 664 ? S 22:26 0:00 /usr/sbin/automou root 2818 0.0 0.1 1688 664 ? S 22:26 0:00 /usr/sbin/automou root 2913 0.0 0.1 1624 624 ? S 22:26 0:00 crond stan 3025 0.0 0.2 2544 1224 ? S 22:26 0:00 /bin/sh /usr/bin/ stan 3105 0.0 1.1 14016 5760 ? S 22:26 0:00 magicdev stan 3120 0.0 2.7 28788 14044 ? S 22:26 0:00 kdeinit: Running. stan 3123 0.0 2.7 28628 14132 ? S 22:26 0:00 kdeinit: dcopserv stan 3125 0.0 0.7 6100 3844 ? S 22:26 0:00 /usr/lib/gconfd-2 stan 3127 0.0 3.0 30136 15548 ? S 22:26 0:00 kdeinit: klaunche stan 3130 0.0 3.8 33808 20048 ? S 22:26 0:00 kdeinit: kded stan 3145 0.0 1.4 12724 7628 ? S 22:26 0:00 artsd -F 10 -S 40 stan 3148 0.0 4.1 38344 21404 ? S 22:26 0:00 kdeinit: knotify stan 3152 0.0 0.0 1572 340 ? S 22:26 0:00 kwrapper ksmserve stan 3154 0.0 3.3 31036 17140 ? S 22:26 0:00 kdeinit: ksmserve stan 3155 0.0 3.6 32260 19036 ? S 22:26 0:00 kdeinit: kwin -se stan 3157 0.1 4.9 40016 25296 ? S 22:26 0:01 kdeinit: kdesktop stan 3160 0.0 2.8 29776 14684 ? S 22:26 0:00 kdeinit: kio_file stan 3161 0.0 4.2 35076 21896 ? S 22:26 0:00 kdeinit: kicker stan 3165 0.0 3.6 31736 18564 ? S 22:26 0:00 kdeinit: klipper stan 3168 0.0 4.0 33664 20636 ? S 22:26 0:00 kdeinit: kmix -se stan 3193 0.0 2.1 21752 10936 ? S 22:27 0:00 /usr/bin/kdesud mldonkey 3312 1.2 2.9 25520 15200 ? SN 22:27 0:09 /usr/lib/mldonkey root 3314 0.0 0.0 1644 468 ? S 22:27 0:00 _pluto_adns root 3315 0.0 0.0 1644 468 ? S 22:27 0:00 _pluto_adns root 3316 0.0 0.0 1644 468 ? S 22:27 0:00 _pluto_adns stan 3326 0.5 5.1 40792 26580 ? S 22:27 0:04 /usr/bin/kmldonke stan 3457 0.0 0.2 2532 1184 ? S 22:29 0:00 /bin/sh /usr/bin/ stan 3459 0.0 0.2 2640 1268 ? S 22:29 0:00 /bin/bash /usr/bi stan 3466 0.0 0.2 2704 1376 ? S 22:29 0:00 /bin/sh /usr/lib/ stan 3473 3.9 6.0 92248 31260 ? S 22:29 0:26 /usr/lib/mozilla- stan 3489 0.0 1.0 10416 5556 ? S 22:30 0:00 /usr/bin/esd -ter root 3502 0.0 0.5 8248 3072 ? S 22:31 0:00 smbd -D root 3512 0.0 0.3 6140 2012 ? S 22:31 0:00 nmbd -D root 3695 0.0 0.0 1568 448 tty1 S 22:31 0:00 /sbin/mingetty tt root 3696 0.0 0.0 1568 448 tty2 S 22:31 0:00 /sbin/mingetty tt root 3697 0.0 0.0 1568 448 tty3 S 22:31 0:00 /sbin/mingetty tt root 3698 0.0 0.0 1568 448 tty4 S 22:31 0:00 /sbin/mingetty tt root 3699 0.0 0.0 1568 448 tty5 S 22:31 0:00 /sbin/mingetty tt root 3700 0.0 0.0 1568 448 tty6 S 22:31 0:00 /sbin/mingetty tt stan 3822 0.1 4.0 34180 20712 ? S 22:37 0:00 kdeinit: konsole stan 3823 0.0 0.3 2744 1572 pts0 S 22:37 0:00 /bin/bash root 3871 0.0 0.1 2444 1020 pts0 S 22:39 0:00 su root 3874 0.0 0.3 2740 1568 pts0 S 22:39 0:00 bash root 3920 0.0 0.1 2424 784 pts0 R 22:40 0:00 ps aux
route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo 0.0.0.0 192.168.1.1 128.0.0.0 UG 0 0 0 eth1 128.0.0.0 192.168.1.1 128.0.0.0 UG 0 0 0 eth1 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth1
I'm 100% sure that I'm not going through proxy, well at least judging from settings in Firefox, Konqueror and Mandrake Control Center.
One thing to do is maybe to install webmin (if you havn't already) and delete the interface eth0 and everything to do with networking then reinstall .the interface and network..I guess you could do it from the Mandrake wizards if they worked the first time ?? but I prefer doing it by hand or webmin and understanding.....
Just out of interest.... perhaps try running apache on the second PC and connect to this over the LAN. That should at least say if its a routing problem or something else.
and just a last check.... to see if the firewall somehow got activated ...
ps -ef ¦ grep iptables
see if it comes back with anything ..
and
ps -ef ¦ grep shorewall
I installed webmin but it gives me:
webmin
Starting Webmin [ OK ]
Installation problem. Please reinstall.
This command doesn't seem to work:
ps -ef ¦ grep iptables
ERROR: Garbage option.
ps -ef ¦ grep shorewall
ERROR: Garbage option.
I don't know about apache, I never used it before. Furthermore, now I am experiencing "Document contains no data" errors even for local addresses, such as http://localhost:4080 (MLDonkey), http://127.0.0.1:18020 (Linuxant Driverloader) and it's quite frequent.
-
I just installed Mandrake on another computer in my network, works great, no problems. This is definitely a software configuration issue.
-
I am not using a proxy, my provider is Comcast cable. I use Firefox as my default browser in Windows and it's fine no probems. I tried nslookup ebay.com and it worked, gave me an address 66.135.192.87. When I enter it into Firefox it results in document contains no data error but when I do it the second time it works as usual. The pictures don't show up but I hit refresh and they do. AOL Instant Messenger takes 10 retries to connect.
The strangest thing is that when I am not running any appplications my bandwidth monitor shows constant 1Kb/s transfers. Maybe it's natural because I'm on wireless.
-
...until last week when I installed and started using MLDonkey file sharing client, OpenVPN and sshd.
Are all of these running when you're experiencing these problems?
My guess is that something (most likely MLDonkey) is sucking up all of your bandwidth. Try throttling it down so it only uses, say, 50% of your available bandwidth and see if the problem still exists. For how to throttle it, see the MLDonkey website or the program's docs.
I already disabled MLDonkey, sshd and OpenVPN and it didn't help. Also I have noticed that the same error sometimes happens for local addresses: 192.168.1.1, 127.0.0.1, etc.
-
Well I just went to resolv.conf and commented one of the DNS entries. This sort of helped and the error is not so frequent. eBay and Hotmail still give me major problems though because they use a lot of different servers. Windows XP on the same machine works fine as do all other computers in my home network.
-
I am running Mandrake 10 Official, 2.6.3-13 kernel and Mozilla Firefox as my browser. I never had any problems with internet connection until last week when I installed and started using MLDonkey file sharing client, OpenVPN and sshd. When clicking on a link Firefox would sometimes show a "Document contains no data" error. All I had to do was click on the link again and voila the website opens. But now this happens for every new link I click and it takes more than one click to connect to a website I want (eBay takes about five clicks). The strange thing is that once I do connect to a given URL, that website works fine for the rest of my browsing session, but every new link I click results in the error.
I confirmed this to be a problem on all browsers (Konqueror gives me a similar error), on instant messaging clients, on both wireless and ethernet connection, on both DHCP and STATIC internet configurations. I tried disabling my firewall in the router and even setting my laptop as a DMZ host but that had no effect. I also disable IPv6 as some people suggested and tried using only one DNS entry in lookup.conf, still no luck. Clearing Firefox cache does nothing, because this is not a browser problem. Turning off MLDonkey OpenVPN and sshd services and restarting the computer doesn't cure the problem.
Please help, I am going mad about this. I thought Linux was supposed to work well with Internet. This problem is inexistent on the same laptop with Windows XP running.
Here is my ifconfig:
eth1 Link encap:Ethernet HWaddr ***private***
inet addr:192.168.1.6 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:3986071 errors:0 dropped:0 overruns:0 frame:0
TX packets:4885954 errors:9 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:826236594 (787.9 Mb) TX bytes:803140251 (765.9 Mb)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:402630 errors:0 dropped:0 overruns:0 frame:0
TX packets:402630 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:32028207 (30.5 Mb) TX bytes:32028207 (30.5 Mb)
-
Thanks for the info. I don't know what happened but APM messed up my Mandrake installation completely. It wouldn't let me login as a regular user, I had to login as root. All my devices weren't working, like ethernet and wireless. I had to reinstall from scratch. I will just wait and see when Toshiba laptops are going to be supported in Linux.
-
OK, that worked but now I have bigger problem.
I tested acpi thoroughly, even in text mode. Suspend and hibernate don't work properly. The laptop suspends fine but when I press the power button the screen won't turn on so I have to take out the battery to restart. The laptop also hibernates fine but when I push the power button it boots the default kernel, starts loading memory image from swap partition and then hangs on "Settling down DMIs", it displays something like "double fault at rtd..." I can still boot linux by passing noresume to boot options.
I decided to install apm hoping that would solve my problems. Installed the apmd rpm from CD and added apm=on acpi=off to kernel boot options. Restarted the laptop and it got stuck during "enabling pcmcia". Restarted again, same thing. I changed the boot options to acpi=on apm=off, the kernel booted fine, passed "enabling pcmcia" and right when it goes into X server the screen goes blank and the system hangs.
What should I do now? Reinstall from scratch? I already did that 5 times trying to get Mandrake working properly on my laptop, still no luck.
Thanks in advance to everyone who is helping me to solve this problem.
-
HELP!!!!! I just updated to the new 2.6.3-13 kernel and pmsuspend2 performed suspend to disk perfectly! However when I turned on the laptop and booted the same kernel it started loading the image from swap partition, gave me an error and hanged. Now I can't boot either of my kernels, not even failsafe. I'm currently using LILO, so I can't just press 'e' and edit something.
What should I do? I can't use Linux right now!
-
If you're comfortable at compiling your own kernel, the 2.6.6 kernel (in cooker) has a laptop mode that can be enabled. That should help with your battery life.
I tried compiling newer kernels but it doesn't work for my configuration, NVIDIA drivers don't compile, CD burner drivers dissapear and other strange stuff starts happening.
-
I just followed those instructions and here is what I got:
cat info
processor id: 0
acpi id: 0
bus mastering control: yes
power management: no
throttling control: no
limit interface: no
It seems that ACPI doesn't support my processor (Pentium 4). Basically the only power management function that works is the battery monitor.
-
Is there any other way I can save battery power? On Windows XP this laptop runs for about 2 hours and 15 minutes, while on Linux it's about 1 hour, even if no applications are launched. This barely gets me through a class in college. I just want to be able to put my laptop is lower power mode (like standby) when I am not using it.
-
I'm using Mandrake 10 with 2.6.3-7 vanilla SMP kernel. My laptop is Toshiba P15-S420. I have tried many different things but I still can't get suspend/resume to work. In Windows XP it works just fine.
First, I tried acpi. I enabled acpi in the boot loader. The battery monitor works great. When I execute pmsuspend2 command, the laptop just switches to a screensaver with a password lock. The hard drive and fan are still working. Also, it gives me a "/bin/echo: write error: Operation not permitted".
Next, I turned off acpi and enabled apm. Now the battery monitor always shows "plugged in, no battery". However when I execute a suspend command the laptop successfully goes into suspend mode, completely shuts off and has the power button blinking yellow. When I push the power button it just boots normally, no resume.
Are there any other things I can try to get this to work? I heard about software suspend (swsusp) but I don't know how to use it, there is no readme that tell me which commands to use. I also tried recompiling the kernel and turning on all power management options but that didn't have any effect.
[moved from Hardware by spinynorman]
-
It's okay, I already fixed it. Did a clean install of Mandrake 10. I'm not going to mess with those freaky config files anymore unless I 100% know what I'm doing.
-
what default shell does your user have and is that shell installed ???
edits
also try another user.... can this one open the shell.
The default shell is /bin/bash. I know it's installed because it works when I login as root. I created another user and it didn't help, same problem.
Also, I tried running Konsole from run line, same thing.
-
I hope I don't have to reinstall Mandrake from scratch, I already got everything configured so well.
-
I already removed that entry from rc.local and restarted, but I still can't run Konsole.
-
I'm running Mandrake 10 Official with 2.6.3-7 kernel and I have this problem: I can't launch Konsole as a regular user, it just opens the Konsole window and hangs there, doesn't show command prompt. When I log in as root it works fine. Also, when I go to Configure Your Computer it asks me for a root password and then says that SU command not found. I logged in as root and su command was working fine.
This started happening after I installed Azureus (java version of Bittorrent) and tried adding it to path. I edited etc/rc.local and added PATH=$PATH:/home/... I know, this is probably wrong, I'm a newbie and I coulodn't find a FAQ how to add a program to search path. Also I uninstalled wxPython and some python libs that day. I tried commenting that line in rc.local but that didn't help.
I think the problem is that the program search path is screwed up when I log in as a regular user. Any suggestions?
Connection problems "Document contains no data"
in Networking
Posted
Well, yesterday I was getting rid of networking applications I don't need, including FreeSwan. It seems that my connection is better now, I haven't gotten any error messages so far.
I think FreeSwan messed up my routing table, it looks weird comparing to the one on my other Linux computer. Right now the routing table is back to normal, its only 3 entries.
Thanks to everyone who helped me solved this, I am now a happy camper :D