toxic

Hi there.

I have been searching for a ssh client with a GUI, for my linux machine. In windows I use the ssh secureshell client witch i'm am very satisfied with. But I am not ably to find any for linux. I have tryed ssh in the console but I would like a GUI.

is there any one who knows where I can find this???

ok I found this

https://mandrivausers.org/index.php?showtop...0&hl=microphone

witch dit it all.

thx. again for helping

I can't figure out how to select the correct mic.

I do have the mic pluged in at the backside and there is no mic input in the front pannel.

thanx for helping

Hi there.

I have been running mdk 10.2 for a while now and I have just installed skype. But it doesn't work well my mic don't work. so I tried audacity and there it does not work either. what can I do???

I look in some other post and they said something about alsamixer and change my mic settings but I don't know how.

what can i do?

I got it to work

I typed

linux noapic acpi=off apm=off

tryed turning off my sata disk. but the problem remains.

I have mandrake on my ide disk.

and my ram are sat to dual in the bios.

I am not using raid and that is off in bios also. but I do use the sata disk because i run winXP on my sata drive.

what really confusses me is that I can install the 64-bit version with no problem. it's only the 32-bit that gives me trubble. I also tryed downloading Mandriva 2006 beta 0.3 and the exact same happend.

thx for helping :D

AMD Athlon 64 bit 3200+

Asus A8V-SLI delux

ASUS 6600GT PCI-e

Geil 2x512 MB DDR400 PC3200 (dual)

Maxtor 160GB with WinXP installed

Maxtor 120GB with Mandriva LE 2005 64-bit

Samsung SyncMaster 710T (digital)

try all 3 now. both noapic nolapic and dma=off. non of them work, still the same problem. can I type all 3 of them in the same comand line like "linux noapic nolapic dma=off" ? also tryed that but dit not work ether.

I tryed to look in the bios for some power saving features but could not find any thing.

what els can I do els?

what mail program are you using?

Hi all.

at the moment I have installed mandriva LE2005 64-bit and that works just fine. But am having a lot of trouble with java and flash and so on, so I decided to install the 32-bit version. But when I try to install mandriva it just freeze. it not at a specific point it freeze it just happens at the beginning.

when I try to install in text mode it stops when it says

"

Please wait

Installing driver for hard drive controller nVidia corporation|CK804

Serial ATA ControllerDisabling IRQ#12

"

I have tryed "Linux noapic" but doesn't work.

what can i do???

Okey I tryed what arctic said but it really messed everything up. So I just reinstall mandriva again so now everything works again. I just have to install different programs.

But thx for you help anyway.

Hey all. hope someone can help me.

I just installed madriva LE 2005 64-bit on my machine. I got it up and runnig and everything worked fine. Then I wanted to create a fat32 partition so I had a patition that I could read and write on in mandriva and winXP. So I intered windows and split up one partition into to.

Now then I start mandriva there is an error. it says.

fsck.ext/dev/hda7:

The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else,) then the superblock is corrupt, and you might try running e2fsck with an alternate superblock:

e2fsck -b8193 <device>

: Bad magic number in super-block while trying to open /dev/hda7

Failed to check filesystem. Do you want to repair the errors? (Y/N)

(Beware, you can lose data)

"then I type Y, and it says"

Couldn't find ext2 superblock, trying backup blocks...

e2fsck 1.36 (05-Feb-2005)

fsck.ext3

The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else,) then the superblock is corrupt, and you might try running e2fsck with an alternate superblock:

e2fsck -b8193 <device>

: Bad magic number in super-block while trying to open /dev/hda7

[FAILED]

*** An error occurred during the file system check.

*** Drooping you to a shell; then system will reboot

*** Then you leave the shell.

Give root password for maintenance

(or type Control-D for normal startup):

"then I enter my root password and it says"

(Repair filesystem) 1 #_

So what can I do??????

[moved from Software by spinynorman]

Hey.

I just installed mandriva linited edition 2005 10.2 64-bit

Now I want to install a Nvidia driver but it says that I need to install the kernel.

I have tryed to install a Nvidia driver once before but that was on a 32-bit machine.

I have surfed the internet to find a 64-bit kernel but I can't find it anywhere.

When I type “uname –a” I get

“Linux localhost 2.6.11-6mdk #1 Tue Mar 22 10:20:32 EST 2005 x86_64 AMD Athlon ™ 64 Processor 3200+ unknown GNU/Linux”

So my question is where I can find a kernel so I can install my Nvidia driver???

kan someone please post a link???

[moved from Installing Mandrake by spinynorman]

I can't see any errors in the Xlog file.

But Everything works fine so I don't wanna waist any more time on solving something that is working.

So thanx for you help

hi.

when I type "dmesg | grep nvidia"

it replys nvidia: module license 'NVIDIA' taints kernel.

and when I type "dmesg | grep agp"

it gives me

"Linux agpgart interface v0.100 © Dave Jones

agpgart: Detected SiS 746 chipset

agpgart: Maximum main memory to use for agp memory: 690M

agpgart: AGP aperture is 64M @ 0xd0000000"

what can I do when the reply is

when i cat /proc/driver/nvidia/agp/status

it gives me

"AGP initialization failed, please check the ouput

of the 'dmesg' command and/or your system log file

for additional information on this problem."

????

thx that worked.

HI I just installed thunderbird and configured my e-mail acount but then I typed a wrong password and now every time I try to get a new mail is says that the password is wrong.

but where do I change my wrong password with the correct?

I can't find it anywere in Thunderbird.....

when i cat /proc/driver/nvidia/agp/status

it gives me

"AGP initialization failed, please check the ouput

of the 'dmesg' command and/or your system log file

for additional information on this problem."

But I updated mdk and I do not have any problem at all.

OK now it works

I typed Option ”NvAGP” ”3” and now it dosn't hang

But now I have a new question. Because sometimes my screen goes black for like 2 seconds and then the black screen disapears again like nothing has happend. Do you know what could be? This is not somethings that has happend after I typed ”NvAGP” ”3” it has done that the hole time.

To VeeDubb.

I get the nVidia logo just before the desktop loads.

The nVidia driver name is "NVIDIA-Linux-x86-1.0-7174-pkg1.run"

Also when I type startx it just goes into the desktop inviroment and then after a while it hangs like always. And there is nothing to du than reboot the machine.

To daniewicz.

I have looked at the Xorg.0.log but as far as I know I can not see there is any error in the file

again thx for helping.

I tryed to install the nvidia driver again but the problem stil remains.

Yes I do have a "/var/log/Xorg.0.log" what should I do with it?

But I still don't have a "/proc/driver/nvidia/agp/status" file??????

I do not have any of those two files.

When I try to get to the status file I can only get to this point “/proc/driver/” /driver/ is empty.

And inside /var/log/ there is no file name XFree86.0.log

By XF86Config-4 you mean XF86Config right?

Because I don't have a XF86Config-4

but the xorg.conf is the same..