Kieth Posted April 10, 2005 Report Share Posted April 10, 2005 (edited) Yesterday I logged in to see if there were any bug fixes and normal up-dates to download, which I do regularly. There were a lot, so I started. Afterward, I did some work, etc. Then I logged out. When I wanted to get into Mandrake again, it loaded fine, up until where the gnome splash screen should have appeared. I was desperate. I waited a few minutes, but nothing. I tried logging in a couple of more times - nothing. I went into WindowsXP so I could get into this forum for an answer, but didn't find anything (although I'm sure the answer is here). I tried doing a new install, without formating. Nothing. So last night I left Mandrake on in hopes that it would resolve it's own problem, and YES, IT DID!! :woot_jump: Any idea as to what happened? Kieth Edit: I just turned my computer off, then back on to see what would happen. It took 5 minutes to load after the blue splash screen came on. I use gnome, so it took that much time for gnome to load. Any ideas on how to resolve it? Thanks. [moved from Installing Mandrake by spinynorman] Edited April 16, 2005 by Kieth Quote Link to comment Share on other sites More sharing options...
Kieth Posted April 11, 2005 Author Report Share Posted April 11, 2005 Here's some more information I discovered. I use the automatic login to enter into gnome. Therefore, I decided not to use that option. It still took 5 minutes, from the time the blue screen and mouse were visible, to get the option to login into to a specific user. Any ideas on how to resolve the problem? Thanks. Kieth Quote Link to comment Share on other sites More sharing options...
adamw Posted April 11, 2005 Report Share Posted April 11, 2005 could be some sort of network resolution issue...does your /etc/hosts look sane? Quote Link to comment Share on other sites More sharing options...
Kieth Posted April 11, 2005 Author Report Share Posted April 11, 2005 Thanks for the reply. I do not know what etc/hosts is suppose to look like, but here it is. 127.0.0.1 localhost Kieth Quote Link to comment Share on other sites More sharing options...
adamw Posted April 11, 2005 Report Share Posted April 11, 2005 127.0.0.1 localhost.localdomain localhost could try that. Don't *think* it's the cause, but you never know. Um, what else, what else...man, I wish GNOME logged more...is there anything in ~/.xsession-errors ? Quote Link to comment Share on other sites More sharing options...
Kieth Posted April 12, 2005 Author Report Share Posted April 12, 2005 I couldn'f find /.xsession-errors. All I found were the following 3 files: 1) /usr/share/config/kdm/Xsession #! /bin/sh # Xsession - run as user # redirect errors to a file in user's home directory if we can for errfile in "$HOME/.xsession-errors" "${TMPDIR-/tmp}/xses-$USER" "/tmp/xses-$USER" do if ( cp /dev/null "$errfile" 2> /dev/null ) then chmod 600 "$errfile" exec > "$errfile" 2>&1 break fi done DM_PATH=$PATH PATH= test -f /etc/profile && . /etc/profile test -f $HOME/.profile && . $HOME/.profile IFS_SAVE=$IFS IFS=: for i in $DM_PATH; do case :$PATH: in *:$i:*);; ::) PATH=$i;; *) PATH=$PATH:$i;; esac done IFS=$IFS_SAVE export PATH test -f /etc/xprofile && . /etc/xprofile test -f $HOME/.xprofile && . $HOME/.xprofile case $1 in "") exec xmessage -center -buttons OK:0 -default OK "Sorry, $DESKTOP_SESSION is no valid session." ;; failsafe) exec xterm -geometry 80x24-0-0 ;; custom) exec $HOME/.xsession ;; default) exec startkde ;; *) eval exec "$1" ;; esac exec xmessage -center -buttons OK:0 -default OK "Sorry, cannot execute $1. Check $DESKTOP_SESSION.desktop." 2) /etc/X11/xdm/Xsession #!/bin/bash -login exec /etc/X11/Xsession $* # Xsession ends here 3) /etc/X11/Xsession #!/bin/sh # Modification for Mandrake Linux by Chmouel Boudjnah <chmouel@mandraksoft.com> # # $Id: Xsession,v 1.44 2004/02/05 10:48:48 flepied Exp $ # read the user (~/.i18n) or system-wide (/etc/sysconfig/i18n) i18n settings . /etc/profile.d/10lang.sh if [ -z "$GDMSESSION" ]; then # redirect errors to a file in user's home directory if we can for errfile in "$HOME/.xsession-errors" "${TMPDIR-/tmp}/xses-$USER" "/tmp/xses-$USER" do if ( cp /dev/null "$errfile" 2> /dev/null ) then chmod 600 "$errfile" exec > "$errfile" 2>&1 break fi done fi # Mandrake default background if [ "`whoami`" = root ]; then xsetroot -solid "#B20003" IS_ROOT=1 else IS_ROOT= # Load the color only when not called from gdm/kdm if [ -z "$1" ]; then xsetroot -solid "#21449C" fi fi xsetroot -cursor_name watch AGENT=$(type -p ssh-agent) if [ -x "$AGENT" -a -z "$SSH_AUTH_SOCK" ]; then if [ -r $HOME/.ssh/identity -o -r $HOME/.ssh2/identification -o -r $HOME/.ssh/id_dsa -o -r $HOME/.ssh/id_rsa ]; then SSH_AGENT="$AGENT --" fi fi # clean up after xbanner if [ -f /usr/X11R6/bin/freetemp ]; then freetemp fi userresources=$HOME/.Xresources userresources2=$HOME/.Xdefaults sysresources=/etc/X11/Xresources # merge in defaults and keymaps if [ -f $sysresources ]; then xrdb -merge $sysresources fi if [ -f $userresources ]; then xrdb -merge $userresources fi if [ -f $userresources2 ]; then xrdb -merge $userresources2 fi if [ -x /etc/X11/xinit/fixkeyboard ]; then /etc/X11/xinit/fixkeyboard fi if [ -z "$BROWSER" ]; then # we need to find a browser on this system BROWSER=`which mozilla 2> /dev/null` if [ -z "$BROWSER" ] || [ ! -e "$BROWSER" ]; then # not found yet BROWSER= fi fi if [ -z "$BROWSER" ]; then # we need to find a browser on this system BROWSER=`which netscape 2> /dev/null` if [ -z "$BROWSER" ] || [ ! -e "$BROWSER" ]; then # not found yet BROWSER= fi fi if [ -z "$BROWSER" ]; then # we need to find a browser on this system BROWSER=`which lynx 2> /dev/null` if [ -z "$BROWSER" ] || [ ! -e "$BROWSER" ]; then # not found yet BROWSER= else BROWSER="xvt -e lynx" fi fi export BROWSER export HELP_BROWSER="$BROWSER" # now, we see if xdm/gdm/kdm has asked for a specific environment if [ $# = 1 ]; then DESKTOP=$1 else # use default DESKTOP from config file # users may want to choose their own desktop # even when x-session is started by startx command. # -- Jaegeum -- if [ -f $HOME/.desktop ]; then . $HOME/.desktop >/dev/null 2>&1 elif [ -f /etc/sysconfig/desktop ]; then . /etc/sysconfig/desktop >/dev/null 2>&1 fi fi # fix .qtrc for Japanese if [ "$LANG" = ja_JP ]; then [ ! -d $HOME/.qt ] && mkdir $HOME/.qt if [ ! -r $HOME/.qt/qtrc ] || ! grep -q '[General]' $HOME/.qt/qtrc; then cat >> $HOME/.qt/qtrc <<EOF [General] XIMInputStyle=Over The Spot EOF elif ! grep -q XIMInputStyle $HOME/.qt/qtrc; then rm -f $HOME/.qt/qtrc.$$ sed "s/\[General\]/[General]\nXIMInputStyle=Over The Spot/" < $HOME/.qt/qtrc > $HOME/.qt/qtrc.$$ mv -f $HOME/.qt/qtrc.$$ $HOME/.qt/qtrc fi fi ### Launch an XIM input server if needed # it must be after definition of DESKTOP variable; but before any # program that may want user input if [ -x /etc/X11/xinit/XIM ]; then . /etc/X11/xinit/XIM fi ### Launch first time wizard if needed if [ -z "$IS_ROOT" -a ! -e $HOME/.drakfw ] && type drakfw > /dev/null 2>&1 && touch $HOME/.drakfw > /dev/null 2>&1; then if [ -x /etc/X11/xinit.d/numlock ]; then /etc/X11/xinit.d/numlock fi xsetroot -cursor_name left_ptr exec $SSH_AGENT drakfw fi # run scripts in /etc/X11/xinit.d for i in /etc/X11/xinit.d/*; do [ -d $i ] && continue # Don't run ??foo.{rpmsave,rpmorig,rpmnew,~} scripts [ "${i%.rpmsave}" != "${i}" ] && continue [ "${i%.rpmorig}" != "${i}" ] && continue [ "${i%.rpmnew}" != "${i}" ] && continue [ "${i%\~}" != "${i}" ] && continue if [ -x $i ]; then if [ "${DESKTOP}" = default ]; then SESSION=$(/usr/sbin/chksession -F) else SESSION=${DESKTOP} fi if grep -q "# to be sourced" $i; then . $i "${SESSION}" else $i "${SESSION}" & fi fi done if [ -n "$DESKTOP" ]; then case $DESKTOP in failsafe) xsetroot -cursor_name left_ptr type -p rxvt > /dev/null >& 2 && exec $SSH_AGENT rxvt -geometry 80x24-0-0 type -p xterm > /dev/null >& 2 && exec $SSH_AGENT xterm -geometry 80x24-0-0 type -p xvt > /dev/null >& 2 && exec $SSH_AGENT xvt type -p twm > /dev/null >& 2 && exec $SSH_AGENT twm ;; default) ;; *) if type -p "$DESKTOP" > /dev/null; then exec $SSH_AGENT /bin/sh -c "$DESKTOP" else exec $SSH_AGENT /bin/sh -c "$(/usr/sbin/chksession -x=$DESKTOP)" fi ;; esac fi # otherwise, take default action if [ -x "$HOME/.xsession" ]; then xsetroot -cursor_name left_ptr exec $SSH_AGENT "$HOME/.xsession" elif [ -x "$HOME/.Xclients" ]; then xsetroot -cursor_name left_ptr exec $SSH_AGENT "$HOME/.Xclients" fi # We may try with chksession if [ -x /usr/sbin/chksession ];then #get the first available SESSION=$(/usr/sbin/chksession -F) [ -n "$SESSION" -a "$SESSION" != Default ] && exec $SSH_AGENT sh -c "$(/usr/sbin/chksession -x=$SESSION)" fi # Argh! Nothing good is installed. Fall back to icewm if [ -x /usr/X11R6/bin/icewm ];then exec $SSH_AGENT /usr/X11R6/bin/icewm else # gosh, neither icewm is available; # fall back to failsafe settings xsetroot -cursor_name left_ptr xclock -geometry 100x100-5+5 & xvt -geometry +0+50 & if [ -x "$BROWSER" -a -f /usr/doc/HTML/index.html ]; then $BROWSER /usr/share/doc/HTML/index.html & fi if [ -x /usr/X11R6/bin/icewm-light ];then exec $SSH_AGENT icewm-light elif [ -x /usr/X11R6/bin/twm ];then exec $SSH_AGENT twm else exec $SSH_AGENT xsm fi fi Quote Link to comment Share on other sites More sharing options...
Guest paul2lv Posted April 12, 2005 Report Share Posted April 12, 2005 .xsession-errors is a hidden file in your home folder. Quote Link to comment Share on other sites More sharing options...
Kieth Posted April 12, 2005 Author Report Share Posted April 12, 2005 Ok, thanks. I found it. ./xsession-errors: which: no galeon in (/usr/bin:/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin/:/usr/games:/home/kieth/bin) SESSION_MANAGER=local/localhost:/tmp/.ICE-unix/3526 (gnome-session:3526): Gtk-WARNING **: Unable to locate theme engine in module_path: "galaxy", Gtk-WARNING **: Unable to locate theme engine in module_path: "lighthouseblue", at /usr/bin/net_applet line 61. (gnome-session:3526): Gtk-WARNING **: Unable to locate theme engine in module_path: "lighthouseblue", Window manager warning: Log level 16: Unable to locate theme engine in module_path: "lighthouseblue", (magicdev:3662): Gtk-WARNING **: Unable to locate theme engine in module_path: "lighthouseblue", (pam-panel-icon:3660): Gtk-WARNING **: Unable to locate theme engine in module_path: "lighthouseblue", (nautilus:3658): Gtk-WARNING **: Unable to locate theme engine in module_path: "lighthouseblue", (gnome-panel:3656): Gtk-WARNING **: Unable to locate theme engine in module_path: "lighthouseblue", mdkapplet already running Gtk-WARNING **: Unable to locate theme engine in module_path: "lighthouseblue", at /usr/bin/mdkapplet line 120. /home/kieth/.MdkOnline/mdkonline should be set to TRUE: please use --force or -f option to launch applet at /usr/bin/mdkapplet line 139. Datadir: /usr/share/games/supertux loadgame: /home/kieth/.supertux/save/slot3.stsg Enter the current level: world1/level11.stl savegame: /home/kieth/.supertux/save/slot3.stsg loadgame: /home/kieth/.supertux/save/slot3.stsg Enter the current level: world1/level11.stl savegame: /home/kieth/.supertux/save/slot3.stsg Enter the current level: world1/level11.stl savegame: /home/kieth/.supertux/save/slot3.stsg loadgame: /home/kieth/.supertux/save/slot3.stsg loadgame: /home/kieth/.supertux/save/slot3.stsg Enter the current level: world1/level11.stl savegame: /home/kieth/.supertux/save/slot3.stsg loadgame: /home/kieth/.supertux/save/slot3.stsg Enter the current level: world1/level11.stl savegame: /home/kieth/.supertux/save/slot3.stsg loadgame: /home/kieth/.supertux/save/slot3.stsg Enter the current level: world1/level11.stl savegame: /home/kieth/.supertux/save/slot3.stsg loadgame: /home/kieth/.supertux/save/slot3.stsg Enter the current level: world1/level11.stl savegame: /home/kieth/.supertux/save/slot3.stsg loadgame: /home/kieth/.supertux/save/slot3.stsg Enter the current level: world1/level11.stl savegame: /home/kieth/.supertux/save/slot3.stsg loadgame: /home/kieth/.supertux/save/slot3.stsg Enter the current level: world1/level12.stl savegame: /home/kieth/.supertux/save/slot3.stsg Datadir: /usr/share/games/supertux loadgame: /home/kieth/.supertux/save/slot3.stsg Enter the current level: world1/level12.stl savegame: /home/kieth/.supertux/save/slot3.stsg loadgame: /home/kieth/.supertux/save/slot3.stsg Enter the current level: world1/level12.stl Walk to dir: 2 savegame: /home/kieth/.supertux/save/slot3.stsg Enter the current level: world1/level13.stl Walk to dir: 2 savegame: /home/kieth/.supertux/save/slot3.stsg Enter the current level: world1/level14.stl savegame: /home/kieth/.supertux/save/slot3.stsg loadgame: /home/kieth/.supertux/save/slot3.stsg Enter the current level: world1/level14.stl savegame: /home/kieth/.supertux/save/slot3.stsg loadgame: /home/kieth/.supertux/save/slot3.stsg Enter the current level: world1/level14.stl savegame: /home/kieth/.supertux/save/slot3.stsg loadgame: /home/kieth/.supertux/save/slot3.stsg Enter the current level: world1/level14.stl savegame: /home/kieth/.supertux/save/slot3.stsg loadgame: /home/kieth/.supertux/save/slot3.stsg Enter the current level: world1/level14.stl savegame: /home/kieth/.supertux/save/slot3.stsg loadgame: /home/kieth/.supertux/save/slot3.stsg Enter the current level: world1/level14.stl savegame: /home/kieth/.supertux/save/slot3.stsg loadgame: /home/kieth/.supertux/save/slot3.stsg Enter the current level: world1/level14.stl savegame: /home/kieth/.supertux/save/slot3.stsg loadgame: /home/kieth/.supertux/save/slot3.stsg Enter the current level: world1/level14.stl savegame: /home/kieth/.supertux/save/slot3.stsg loadgame: /home/kieth/.supertux/save/slot3.stsg Enter the current level: world1/level14.stl savegame: /home/kieth/.supertux/save/slot3.stsg loadgame: /home/kieth/.supertux/save/slot3.stsg Enter the current level: world1/level14.stl savegame: /home/kieth/.supertux/save/slot3.stsg loadgame: /home/kieth/.supertux/save/slot3.stsg Enter the current level: world1/level14.stl Walk to dir: 1 savegame: /home/kieth/.supertux/save/slot3.stsg Enter the current level: world1/level15.stl Walk to dir: 1 savegame: /home/kieth/.supertux/save/slot3.stsg Enter the current level: world1/level16.stl savegame: /home/kieth/.supertux/save/slot3.stsg Datadir: /usr/share/games/supertux loadgame: /home/kieth/.supertux/save/slot1.stsg Entering contrib menu loadgame: /home/kieth/.supertux/save/bonus_island.stsg Enter the current level: bonus1/bonus-level3.stl savegame: /home/kieth/.supertux/save/bonus_island.stsg loadgame: /home/kieth/.supertux/save/slot3.stsg Enter the current level: world1/level16.stl savegame: /home/kieth/.supertux/save/slot3.stsg loadgame: /home/kieth/.supertux/save/slot3.stsg Enter the current level: world1/level16.stl savegame: /home/kieth/.supertux/save/slot3.stsg loadgame: /home/kieth/.supertux/save/slot3.stsg Enter the current level: world1/level16.stl savegame: /home/kieth/.supertux/save/slot3.stsg loadgame: /home/kieth/.supertux/save/slot3.stsg Enter the current level: world1/level16.stl Walk to dir: 4 savegame: /home/kieth/.supertux/save/slot3.stsg Datadir: /usr/share/games/supertux loadgame: /home/kieth/.supertux/save/slot1.stsg Enter the current level: world1/level26.stl Warning: badguy started in wall: kind: jumpy pos: (5641, 399) Warning: badguy started in wall: kind: jumpy pos: (5641, 399) Warning: badguy started in wall: kind: jumpy pos: (5641, 399) savegame: /home/kieth/.supertux/save/slot1.stsg Entering contrib menu loadgame: /home/kieth/.supertux/save/bonus_island.stsg Enter the current level: bonus1/bonus-level3.stl savegame: /home/kieth/.supertux/save/bonus_island.stsg Entering contrib menu loadgame: /home/kieth/.supertux/save/bonus_island.stsg Enter the current level: bonus1/bonus-level3.stl savegame: /home/kieth/.supertux/save/bonus_island.stsg Entering contrib menu loadgame: /home/kieth/.supertux/save/bonus_island.stsg Enter the current level: bonus1/bonus-level3.stl Walk to dir: 1 savegame: /home/kieth/.supertux/save/bonus_island.stsg Enter the current level: bonus1/bonus-level2.stl savegame: /home/kieth/.supertux/save/bonus_island.stsg Entering contrib menu loadgame: /home/kieth/.supertux/save/bonus_island.stsg Enter the current level: bonus1/bonus-level2.stl Walk to dir: 4 savegame: /home/kieth/.supertux/save/bonus_island.stsg Enter the current level: bonus1/bonus-level4.stl savegame: /home/kieth/.supertux/save/bonus_island.stsg Entering contrib menu loadgame: /home/kieth/.supertux/save/bonus_island.stsg Enter the current level: bonus1/bonus-level4.stl savegame: /home/kieth/.supertux/save/bonus_island.stsg Entering contrib menu loadgame: /home/kieth/.supertux/save/bonus_island.stsg Enter the current level: bonus1/bonus-level4.stl savegame: /home/kieth/.supertux/save/bonus_island.stsg Entering contrib menu loadgame: /home/kieth/.supertux/save/bonus_island.stsg Enter the current level: bonus1/bonus-level4.stl savegame: /home/kieth/.supertux/save/bonus_island.stsg Entering contrib menu loadgame: /home/kieth/.supertux/save/bonus_island.stsg Enter the current level: bonus1/bonus-level4.stl savegame: /home/kieth/.supertux/save/bonus_island.stsg Entering contrib menu loadgame: /home/kieth/.supertux/save/bonus_island.stsg Enter the current level: bonus1/bonus-level4.stl savegame: /home/kieth/.supertux/save/bonus_island.stsg Entering contrib menu loadgame: /home/kieth/.supertux/save/bonus_island.stsg Enter the current level: bonus1/bonus-level4.stl savegame: /home/kieth/.supertux/save/bonus_island.stsg Entering contrib menu loadgame: /home/kieth/.supertux/save/bonus_island.stsg Enter the current level: bonus1/bonus-level4.stl savegame: /home/kieth/.supertux/save/bonus_island.stsg Entering contrib menu loadgame: /home/kieth/.supertux/save/bonus_island.stsg Enter the current level: bonus1/bonus-level4.stl savegame: /home/kieth/.supertux/save/bonus_island.stsg Entering contrib menu loadgame: /home/kieth/.supertux/save/bonus_island.stsg Enter the current level: bonus1/bonus-level4.stl savegame: /home/kieth/.supertux/save/bonus_island.stsg Datadir: /usr/share/games/supertux loadgame: /home/kieth/.supertux/save/slot3.stsg Enter the current level: world1/level17.stl Walk to dir: 4 savegame: /home/kieth/.supertux/save/slot3.stsg Enter the current level: world1/level18.stl savegame: /home/kieth/.supertux/save/slot3.stsg loadgame: /home/kieth/.supertux/save/slot3.stsg Enter the current level: world1/level18.stl Walk to dir: 1 savegame: /home/kieth/.supertux/save/slot3.stsg Entering contrib menu loadgame: /home/kieth/.supertux/save/bonus_island.stsg Enter the current level: bonus1/bonus-level4.stl savegame: /home/kieth/.supertux/save/bonus_island.stsg Entering contrib menu loadgame: /home/kieth/.supertux/save/bonus_island.stsg Enter the current level: bonus1/bonus-level4.stl Walk to dir: 0 savegame: /home/kieth/.supertux/save/bonus_island.stsg Entering contrib menu loadgame: /home/kieth/.supertux/save/bonus_island.stsg (Gecko:11873): Gtk-WARNING **: Unable to locate theme engine in module_path: "lighthouseblue", (Gecko:11858): Gtk-WARNING **: Unable to locate theme engine in module_path: "lighthouseblue", (gnome-search-tool:12437): Gtk-WARNING **: Unable to locate theme engine in module_path: "lighthouseblue", (nautilus:12488): GLib-GObject-WARNING **: g_object_set_valist: construct property "sm-connect" for object `GnomeProgram' can't be set after construction (nautilus:12524): GLib-GObject-WARNING **: g_object_set_valist: construct property "sm-connect" for object `GnomeProgram' can't be set after construction (nautilus:12570): GLib-GObject-WARNING **: g_object_set_valist: construct property "sm-connect" for object `GnomeProgram' can't be set after construction (nautilus:12614): GLib-GObject-WARNING **: g_object_set_valist: construct property "sm-connect" for object `GnomeProgram' can't be set after construction (nautilus:12644): GLib-GObject-WARNING **: g_object_set_valist: construct property "sm-connect" for object `GnomeProgram' can't be set after construction (gnome-terminal:12738): Gtk-WARNING **: Unable to locate theme engine in module_path: "lighthouseblue", (gedit:12820): Gtk-WARNING **: Unable to locate theme engine in module_path: "lighthouseblue", Window manager warning: Working around an application which called XSetInputFocus (None) or with RevertToNone instead of RevertToPointerRoot, this is a minor bug in some application. If you can figure out which application causes this please report it as a bug against that application. Gtk-WARNING **: Unable to locate theme engine in module_path: "lighthouseblue", at /usr/lib/libDrakX/ugtk2.pm line 1056. kid exited 13 at /usr/lib/libDrakX/run_program.pm line 156. kid exited -1 at /usr/lib/libDrakX/run_program.pm line 156. kid exited -1 at /usr/lib/libDrakX/run_program.pm line 156. (drakconf.real:13267): Gtk-WARNING **: Unable to locate theme engine in module_path: "lighthouseblue", kid exited -1 at /usr/lib/libDrakX/run_program.pm line 156. Gtk-WARNING **: Unable to locate theme engine in module_path: "lighthouseblue", at /usr/sbin/drakconf.real line 91. kid exited -1 at /usr/lib/libDrakX/run_program.pm line 156. kid exited -1 at /usr/lib/libDrakX/run_program.pm line 156. using different removable device [/dev/hdg] for "Installation CD 3 (x86) (cdrom3)" using different removable device [/dev/hdg] for "Installation CD 1 (x86) (cdrom1)" using different removable device [/dev/hdg] for "Installation CD 2 (x86) (cdrom2)" using different removable device [/dev/hdg] for "Installation CD 4 (x86) (cdrom4)" examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 3 (x86) (cdrom3).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 1 (x86) (cdrom1).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 2 (x86) (cdrom2).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 4 (x86) (cdrom4).cz] Gtk-WARNING **: Unable to locate theme engine in module_path: "lighthouseblue", at /usr/lib/libDrakX/ugtk2.pm line 962. added medium update_source examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 3 (x86) (cdrom3).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 1 (x86) (cdrom1).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 2 (x86) (cdrom2).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 4 (x86) (cdrom4).cz] retrieving source hdlist (or synthesis) of "update_source"... ...retrieving done examining hdlist file [/var/cache/urpmi/partial/hdlist.update_source.cz] examining synthesis file [/var/cache/urpmi/partial/hdlist.update_source.cz] writing list file for medium "update_source" examining pubkey file of "update_source"... performing second pass to compute dependencies examining hdlist file [/var/lib/urpmi/hdlist.Installation CD 3 (x86) (cdrom3).cz] built hdlist synthesis file for medium "Installation CD 3 (x86) (cdrom3)" examining hdlist file [/var/lib/urpmi/hdlist.Installation CD 1 (x86) (cdrom1).cz] built hdlist synthesis file for medium "Installation CD 1 (x86) (cdrom1)" examining hdlist file [/var/lib/urpmi/hdlist.Installation CD 2 (x86) (cdrom2).cz] built hdlist synthesis file for medium "Installation CD 2 (x86) (cdrom2)" examining hdlist file [/var/lib/urpmi/hdlist.Installation CD 4 (x86) (cdrom4).cz] built hdlist synthesis file for medium "Installation CD 4 (x86) (cdrom4)" examining synthesis file [/var/lib/urpmi/synthesis.hdlist.update_source.cz] found 0 headers in cache removing 0 obsolete headers in cache write config file [/etc/urpmi/urpmi.cfg] write config file [/etc/urpmi/urpmi.cfg] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.update_source.cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 3 (x86) (cdrom3).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 1 (x86) (cdrom1).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 2 (x86) (cdrom2).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 4 (x86) (cdrom4).cz] retrieving rpm files from medium "update_source"... ...retrieving done created transaction for installing on / (remove=0, install=0, upgrade=1) adding package mandrakelinux-kde-config-file-10.1-6.1.100mdk.noarch (id=526, eid=526, update=1, file=/var/cache/urpmi/rpms/mandrakelinux-kde-config-file-10.1-6.1.100mdk.noarch.rpm) examining synthesis file [/var/lib/urpmi/synthesis.hdlist.update_source.cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 3 (x86) (cdrom3).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 1 (x86) (cdrom1).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 2 (x86) (cdrom2).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 4 (x86) (cdrom4).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.update_source.cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 3 (x86) (cdrom3).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 1 (x86) (cdrom1).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 2 (x86) (cdrom2).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 4 (x86) (cdrom4).cz] retrieving rpm files from medium "update_source"... ...retrieving done created transaction for installing on / (remove=0, install=0, upgrade=7) adding package cvs-1.11.17-1.1.100mdk.i586 (id=59, eid=59, update=1, file=/var/cache/urpmi/rpms/cvs-1.11.17-1.1.100mdk.i586.rpm) adding package cdrecord-cdda2wav-2.01-0.a28.2.100mdk.i586 (id=367, eid=367, update=1, file=/var/cache/urpmi/rpms/cdrecord-cdda2wav-2.01-0.a28.2.100mdk.i586.rpm) adding package dhcp-client-3.0-1.rc14.0.1.100mdk.i586 (id=215, eid=215, update=1, file=/var/cache/urpmi/rpms/dhcp-client-3.0-1.rc14.0.1.100mdk.i586.rpm) adding package dhcp-common-3.0-1.rc14.0.1.100mdk.i586 (id=204, eid=204, update=1, file=/var/cache/urpmi/rpms/dhcp-common-3.0-1.rc14.0.1.100mdk.i586.rpm) adding package cups-drivers-1.1-138.2.100mdk.i586 (id=298, eid=298, update=1, file=/var/cache/urpmi/rpms/cups-drivers-1.1-138.2.100mdk.i586.rpm) adding package cdrecord-2.01-0.a28.2.100mdk.i586 (id=366, eid=366, update=1, file=/var/cache/urpmi/rpms/cdrecord-2.01-0.a28.2.100mdk.i586.rpm) adding package printer-utils-1.0-138.2.100mdk.i586 (id=311, eid=311, update=1, file=/var/cache/urpmi/rpms/printer-utils-1.0-138.2.100mdk.i586.rpm) Updating /etc/hotplug/usb.usermap ...done. examining synthesis file [/var/lib/urpmi/synthesis.hdlist.update_source.cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 3 (x86) (cdrom3).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 1 (x86) (cdrom1).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 2 (x86) (cdrom2).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 4 (x86) (cdrom4).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.update_source.cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 3 (x86) (cdrom3).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 1 (x86) (cdrom1).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 2 (x86) (cdrom2).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 4 (x86) (cdrom4).cz] retrieving rpm files from medium "update_source"... ...retrieving done created transaction for installing on / (remove=0, install=0, upgrade=3) adding package foomatic-db-3.0.1-0.20040828.1.1.100mdk.i586 (id=299, eid=299, update=1, file=/var/cache/urpmi/rpms/foomatic-db-3.0.1-0.20040828.1.1.100mdk.i586.rpm) adding package foomatic-filters-3.0.1-0.20040828.1.1.100mdk.i586 (id=301, eid=301, update=1, file=/var/cache/urpmi/rpms/foomatic-filters-3.0.1-0.20040828.1.1.100mdk.i586.rpm) adding package foomatic-db-engine-3.0.1-0.20040828.1.1.100mdk.i586 (id=300, eid=300, update=1, file=/var/cache/urpmi/rpms/foomatic-db-engine-3.0.1-0.20040828.1.1.100mdk.i586.rpm) examining synthesis file [/var/lib/urpmi/synthesis.hdlist.update_source.cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 3 (x86) (cdrom3).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 1 (x86) (cdrom1).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 2 (x86) (cdrom2).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 4 (x86) (cdrom4).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.update_source.cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 3 (x86) (cdrom3).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 1 (x86) (cdrom1).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 2 (x86) (cdrom2).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 4 (x86) (cdrom4).cz] retrieving rpm files from medium "update_source"... ...retrieving done created transaction for installing on / (remove=0, install=0, upgrade=2) adding package ghostscript-7.07-19.2.100mdk.i586 (id=302, eid=302, update=1, file=/var/cache/urpmi/rpms/ghostscript-7.07-19.2.100mdk.i586.rpm) adding package ghostscript-module-X-7.07-19.2.100mdk.i586 (id=303, eid=303, update=1, file=/var/cache/urpmi/rpms/ghostscript-module-X-7.07-19.2.100mdk.i586.rpm) examining synthesis file [/var/lib/urpmi/synthesis.hdlist.update_source.cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 3 (x86) (cdrom3).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 1 (x86) (cdrom1).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 2 (x86) (cdrom2).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 4 (x86) (cdrom4).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.update_source.cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 3 (x86) (cdrom3).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 1 (x86) (cdrom1).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 2 (x86) (cdrom2).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 4 (x86) (cdrom4).cz] retrieving rpm files from medium "update_source"... ...retrieving done created transaction for installing on / (remove=0, install=0, upgrade=16) adding package mozilla-mail-1.6-12.2.100mdk.i586 (id=328, eid=328, update=1, file=/var/cache/urpmi/rpms/mozilla-mail-1.6-12.2.100mdk.i586.rpm) adding package libijs0-0.34-76.2.100mdk.i586 (id=307, eid=307, update=1, file=/var/cache/urpmi/rpms/libijs0-0.34-76.2.100mdk.i586.rpm) adding package libdha0.1-1.0-0.pre3.14.100mdk.i586 (id=1, eid=1, update=1, file=/var/cache/urpmi/rpms/libdha0.1-1.0-0.pre3.14.100mdk.i586.rpm) adding package libkrb51-1.3-6.5.100mdk.i586 (id=200, eid=200, update=1, file=/var/cache/urpmi/rpms/libkrb51-1.3-6.5.100mdk.i586.rpm) adding package kdegraphics-kfax-3.2-15.7.100mdk.i586 (id=383, eid=383, update=1, file=/var/cache/urpmi/rpms/kdegraphics-kfax-3.2-15.7.100mdk.i586.rpm) adding package mozilla-spellchecker-1.6-12.2.100mdk.i586 (id=329, eid=329, update=1, file=/var/cache/urpmi/rpms/mozilla-spellchecker-1.6-12.2.100mdk.i586.rpm) adding package libhylafax4.1.1-4.1.8-2.1.100mdk.i586 (id=525, eid=525, update=1, file=/var/cache/urpmi/rpms/libhylafax4.1.1-4.1.8-2.1.100mdk.i586.rpm) adding package libcurl2-7.11.0-2.1.100mdk.i586 (id=616, eid=616, update=1, file=/var/cache/urpmi/rpms/libcurl2-7.11.0-2.1.100mdk.i586.rpm) adding package gimpprint-4.2.7-2.2.100mdk.i586 (id=304, eid=304, update=1, file=/var/cache/urpmi/rpms/gimpprint-4.2.7-2.2.100mdk.i586.rpm) adding package iproute2-2.4.7-11.1.100mdk.i586 (id=509, eid=509, update=1, file=/var/cache/urpmi/rpms/iproute2-2.4.7-11.1.100mdk.i586.rpm) adding package libgimpprint1-4.2.7-2.2.100mdk.i586 (id=305, eid=305, update=1, file=/var/cache/urpmi/rpms/libgimpprint1-4.2.7-2.2.100mdk.i586.rpm) adding package libnetpbm9-9.24-8.1.100mdk.i586 (id=406, eid=406, update=1, file=/var/cache/urpmi/rpms/libnetpbm9-9.24-8.1.100mdk.i586.rpm) adding package libnss3-1.6-12.2.100mdk.i586 (id=319, eid=319, update=1, file=/var/cache/urpmi/rpms/libnss3-1.6-12.2.100mdk.i586.rpm) adding package libnspr4-1.6-12.2.100mdk.i586 (id=317, eid=317, update=1, file=/var/cache/urpmi/rpms/libnspr4-1.6-12.2.100mdk.i586.rpm) adding package mozilla-1.6-12.2.100mdk.i586 (id=321, eid=321, update=1, file=/var/cache/urpmi/rpms/mozilla-1.6-12.2.100mdk.i586.rpm) adding package netpbm-9.24-8.1.100mdk.i586 (id=409, eid=409, update=1, file=/var/cache/urpmi/rpms/netpbm-9.24-8.1.100mdk.i586.rpm) examining synthesis file [/var/lib/urpmi/synthesis.hdlist.update_source.cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 3 (x86) (cdrom3).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 1 (x86) (cdrom1).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 2 (x86) (cdrom2).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 4 (x86) (cdrom4).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.update_source.cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 3 (x86) (cdrom3).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 1 (x86) (cdrom1).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 2 (x86) (cdrom2).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 4 (x86) (cdrom4).cz] retrieving rpm files from medium "update_source"... ...retrieving done created transaction for installing on / (remove=0, install=0, upgrade=1) adding package kernel-source-2.6.3-25mdk.i586 (id=99, eid=99, update=1, file=/var/cache/urpmi/rpms/kernel-source-2.6.3-25mdk.i586.rpm) examining synthesis file [/var/lib/urpmi/synthesis.hdlist.update_source.cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 3 (x86) (cdrom3).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 1 (x86) (cdrom1).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 2 (x86) (cdrom2).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 4 (x86) (cdrom4).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.update_source.cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 3 (x86) (cdrom3).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 1 (x86) (cdrom1).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 2 (x86) (cdrom2).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 4 (x86) (cdrom4).cz] retrieving rpm files from medium "update_source"... ...retrieving done created transaction for installing on / (remove=0, install=0, upgrade=7) adding package libuser1-0.51.7-9.1.100mdk.i586 (id=152, eid=152, update=1, file=/var/cache/urpmi/rpms/libuser1-0.51.7-9.1.100mdk.i586.rpm) adding package libutempter0-0.5.2-12.2.100mdk.i586 (id=63, eid=63, update=1, file=/var/cache/urpmi/rpms/libutempter0-0.5.2-12.2.100mdk.i586.rpm) adding package libwxgtk2.5-2.5.0-0.cvs20030817.1.5.100mdk.i586 (id=433, eid=433, update=1, file=/var/cache/urpmi/rpms/libwxgtk2.5-2.5.0-0.cvs20030817.1.5.100mdk.i586.rpm) adding package libsasl2-2.1.15-10.2.100mdk.i586 (id=422, eid=422, update=1, file=/var/cache/urpmi/rpms/libsasl2-2.1.15-10.2.100mdk.i586.rpm) adding package XFree86-4.3-32.3.100mdk.i586 (id=240, eid=240, update=1, file=/var/cache/urpmi/rpms/XFree86-4.3-32.3.100mdk.i586.rpm) adding package libxfree86-4.3-32.3.100mdk.i586 (id=249, eid=249, update=1, file=/var/cache/urpmi/rpms/libxfree86-4.3-32.3.100mdk.i586.rpm) adding package libuser-0.51.7-9.1.100mdk.i586 (id=150, eid=150, update=1, file=/var/cache/urpmi/rpms/libuser-0.51.7-9.1.100mdk.i586.rpm) Gtk-WARNING **: gtk_widget_size_allocate(): attempt to allocate widget with width -1 and height -1 at /usr/lib/libDrakX/ugtk2.pm line 67. created transaction for installing on / (remove=0, install=0, upgrade=1) adding package libsasl2-2.1.15-10.2.100mdk.i586 (id=422, eid=422, update=1, file=/var/cache/urpmi/rpms/libsasl2-2.1.15-10.2.100mdk.i586.rpm) examining synthesis file [/var/lib/urpmi/synthesis.hdlist.update_source.cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 3 (x86) (cdrom3).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 1 (x86) (cdrom1).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 2 (x86) (cdrom2).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 4 (x86) (cdrom4).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.update_source.cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 3 (x86) (cdrom3).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 1 (x86) (cdrom1).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 2 (x86) (cdrom2).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 4 (x86) (cdrom4).cz] created transaction for installing on / (remove=0, install=0, upgrade=1) adding package libuser-0.51.7-9.1.100mdk.i586 (id=150, eid=150, update=1, file=/var/cache/urpmi/rpms/libuser-0.51.7-9.1.100mdk.i586.rpm) examining synthesis file [/var/lib/urpmi/synthesis.hdlist.update_source.cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 3 (x86) (cdrom3).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 1 (x86) (cdrom1).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 2 (x86) (cdrom2).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 4 (x86) (cdrom4).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.update_source.cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 3 (x86) (cdrom3).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 1 (x86) (cdrom1).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 2 (x86) (cdrom2).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 4 (x86) (cdrom4).cz] Gtk-WARNING **: gtk_widget_size_allocate(): attempt to allocate widget with width -1 and height -1 at /usr/lib/libDrakX/ugtk2.pm line 67. created transaction for installing on / (remove=0, install=0, upgrade=1) adding package libuser1-0.51.7-9.1.100mdk.i586 (id=152, eid=152, update=1, file=/var/cache/urpmi/rpms/libuser1-0.51.7-9.1.100mdk.i586.rpm) examining synthesis file [/var/lib/urpmi/synthesis.hdlist.update_source.cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 3 (x86) (cdrom3).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 1 (x86) (cdrom1).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 2 (x86) (cdrom2).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 4 (x86) (cdrom4).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.update_source.cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 3 (x86) (cdrom3).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 1 (x86) (cdrom1).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 2 (x86) (cdrom2).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 4 (x86) (cdrom4).cz] Gtk-WARNING **: gtk_widget_size_allocate(): attempt to allocate widget with width -1 and height -1 at /usr/lib/libDrakX/ugtk2.pm line 67. created transaction for installing on / (remove=0, install=0, upgrade=2) adding package libutempter0-0.5.2-12.2.100mdk.i586 (id=63, eid=63, update=1, file=/var/cache/urpmi/rpms/libutempter0-0.5.2-12.2.100mdk.i586.rpm) adding package libwxgtk2.5-2.5.0-0.cvs20030817.1.5.100mdk.i586 (id=433, eid=433, update=1, file=/var/cache/urpmi/rpms/libwxgtk2.5-2.5.0-0.cvs20030817.1.5.100mdk.i586.rpm) examining synthesis file [/var/lib/urpmi/synthesis.hdlist.update_source.cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 3 (x86) (cdrom3).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 1 (x86) (cdrom1).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 2 (x86) (cdrom2).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 4 (x86) (cdrom4).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.update_source.cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 3 (x86) (cdrom3).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 1 (x86) (cdrom1).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 2 (x86) (cdrom2).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 4 (x86) (cdrom4).cz] retrieving rpm files from medium "update_source"... ...retrieving done created transaction for installing on / (remove=0, install=0, upgrade=6) adding package OpenOffice.org-help-it-1.1.2-8.100mdk.i586 (id=263, eid=263, update=1, file=/var/cache/urpmi/rpms/OpenOffice.org-help-it-1.1.2-8.100mdk.i586.rpm) adding package OpenOffice.org-1.1.2-8.100mdk.i586 (id=255, eid=255, update=1, file=/var/cache/urpmi/rpms/OpenOffice.org-1.1.2-8.100mdk.i586.rpm) adding package OpenOffice.org-libs-1.1.2-8.100mdk.i586 (id=297, eid=297, update=1, file=/var/cache/urpmi/rpms/OpenOffice.org-libs-1.1.2-8.100mdk.i586.rpm) adding package OpenOffice.org-help-en-1.1.2-8.100mdk.i586 (id=258, eid=258, update=1, file=/var/cache/urpmi/rpms/OpenOffice.org-help-en-1.1.2-8.100mdk.i586.rpm) adding package OpenOffice.org-l10n-en-1.1.2-8.100mdk.i586 (id=278, eid=278, update=1, file=/var/cache/urpmi/rpms/OpenOffice.org-l10n-en-1.1.2-8.100mdk.i586.rpm) adding package OpenOffice.org-l10n-it-1.1.2-8.100mdk.i586 (id=284, eid=284, update=1, file=/var/cache/urpmi/rpms/OpenOffice.org-l10n-it-1.1.2-8.100mdk.i586.rpm) examining synthesis file [/var/lib/urpmi/synthesis.hdlist.update_source.cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 3 (x86) (cdrom3).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 1 (x86) (cdrom1).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 2 (x86) (cdrom2).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 4 (x86) (cdrom4).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.update_source.cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 3 (x86) (cdrom3).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 1 (x86) (cdrom1).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 2 (x86) (cdrom2).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 4 (x86) (cdrom4).cz] retrieving rpm files from medium "update_source"... ...retrieving done created transaction for installing on / (remove=0, install=0, upgrade=15) adding package sysklogd-1.4.1-5.1.100mdk.i586 (id=104, eid=104, update=1, file=/var/cache/urpmi/rpms/sysklogd-1.4.1-5.1.100mdk.i586.rpm) adding package printer-filters-1.0-138.2.100mdk.i586 (id=309, eid=309, update=1, file=/var/cache/urpmi/rpms/printer-filters-1.0-138.2.100mdk.i586.rpm) adding package xine-ui-0.9.23-3.1.100mdk.i586 (id=88, eid=88, update=1, file=/var/cache/urpmi/rpms/xine-ui-0.9.23-3.1.100mdk.i586.rpm) adding package xchat-2.0.7-6.1.100mdk.i586 (id=65, eid=65, update=1, file=/var/cache/urpmi/rpms/xchat-2.0.7-6.1.100mdk.i586.rpm) adding package rsync-2.6.0-1.2.100mdk.i586 (id=55, eid=55, update=1, file=/var/cache/urpmi/rpms/rsync-2.6.0-1.2.100mdk.i586.rpm) adding package passwd-0.68-2.2.100mdk.i586 (id=149, eid=149, update=1, file=/var/cache/urpmi/rpms/passwd-0.68-2.2.100mdk.i586.rpm) adding package sox-12.17.4-2.1.100mdk.i586 (id=251, eid=251, update=1, file=/var/cache/urpmi/rpms/sox-12.17.4-2.1.100mdk.i586.rpm) adding package mkisofs-2.01-0.a28.2.100mdk.i586 (id=369, eid=369, update=1, file=/var/cache/urpmi/rpms/mkisofs-2.01-0.a28.2.100mdk.i586.rpm) adding package printer-testpages-1.0-138.2.100mdk.i586 (id=310, eid=310, update=1, file=/var/cache/urpmi/rpms/printer-testpages-1.0-138.2.100mdk.i586.rpm) adding package utempter-0.5.2-12.2.100mdk.i586 (id=94, eid=94, update=1, file=/var/cache/urpmi/rpms/utempter-0.5.2-12.2.100mdk.i586.rpm) adding package libxfree86-4.3-32.3.100mdk.i586 (id=249, eid=249, update=1, file=/var/cache/urpmi/rpms/libxfree86-4.3-32.3.100mdk.i586.rpm) adding package zlib1-1.2.1-2.1.100mdk.i586 (id=218, eid=218, update=1, file=/var/cache/urpmi/rpms/zlib1-1.2.1-2.1.100mdk.i586.rpm) adding package rpmdrake-2.1.3-2.4.100mdk.i586 (id=103, eid=103, update=1, file=/var/cache/urpmi/rpms/rpmdrake-2.1.3-2.4.100mdk.i586.rpm) adding package mc-4.6.0-6.1.100mdk.i586 (id=49, eid=49, update=1, file=/var/cache/urpmi/rpms/mc-4.6.0-6.1.100mdk.i586.rpm) adding package zlib1-devel-1.2.1-2.1.100mdk.i586 (id=357, eid=357, update=1, file=/var/cache/urpmi/rpms/zlib1-devel-1.2.1-2.1.100mdk.i586.rpm) Gtk-WARNING **: gtk_widget_size_allocate(): attempt to allocate widget with width -1 and height -1 at /usr/lib/libDrakX/ugtk2.pm line 67. created transaction for installing on / (remove=0, install=0, upgrade=14) adding package sysklogd-1.4.1-5.1.100mdk.i586 (id=104, eid=104, update=1, file=/var/cache/urpmi/rpms/sysklogd-1.4.1-5.1.100mdk.i586.rpm) adding package printer-filters-1.0-138.2.100mdk.i586 (id=309, eid=309, update=1, file=/var/cache/urpmi/rpms/printer-filters-1.0-138.2.100mdk.i586.rpm) adding package xine-ui-0.9.23-3.1.100mdk.i586 (id=88, eid=88, update=1, file=/var/cache/urpmi/rpms/xine-ui-0.9.23-3.1.100mdk.i586.rpm) adding package xchat-2.0.7-6.1.100mdk.i586 (id=65, eid=65, update=1, file=/var/cache/urpmi/rpms/xchat-2.0.7-6.1.100mdk.i586.rpm) adding package rsync-2.6.0-1.2.100mdk.i586 (id=55, eid=55, update=1, file=/var/cache/urpmi/rpms/rsync-2.6.0-1.2.100mdk.i586.rpm) adding package passwd-0.68-2.2.100mdk.i586 (id=149, eid=149, update=1, file=/var/cache/urpmi/rpms/passwd-0.68-2.2.100mdk.i586.rpm) adding package sox-12.17.4-2.1.100mdk.i586 (id=251, eid=251, update=1, file=/var/cache/urpmi/rpms/sox-12.17.4-2.1.100mdk.i586.rpm) adding package printer-testpages-1.0-138.2.100mdk.i586 (id=310, eid=310, update=1, file=/var/cache/urpmi/rpms/printer-testpages-1.0-138.2.100mdk.i586.rpm) adding package mkisofs-2.01-0.a28.2.100mdk.i586 (id=369, eid=369, update=1, file=/var/cache/urpmi/rpms/mkisofs-2.01-0.a28.2.100mdk.i586.rpm) adding package utempter-0.5.2-12.2.100mdk.i586 (id=94, eid=94, update=1, file=/var/cache/urpmi/rpms/utempter-0.5.2-12.2.100mdk.i586.rpm) adding package zlib1-1.2.1-2.1.100mdk.i586 (id=218, eid=218, update=1, file=/var/cache/urpmi/rpms/zlib1-1.2.1-2.1.100mdk.i586.rpm) adding package rpmdrake-2.1.3-2.4.100mdk.i586 (id=103, eid=103, update=1, file=/var/cache/urpmi/rpms/rpmdrake-2.1.3-2.4.100mdk.i586.rpm) adding package mc-4.6.0-6.1.100mdk.i586 (id=49, eid=49, update=1, file=/var/cache/urpmi/rpms/mc-4.6.0-6.1.100mdk.i586.rpm) adding package zlib1-devel-1.2.1-2.1.100mdk.i586 (id=357, eid=357, update=1, file=/var/cache/urpmi/rpms/zlib1-devel-1.2.1-2.1.100mdk.i586.rpm) examining synthesis file [/var/lib/urpmi/synthesis.hdlist.update_source.cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 3 (x86) (cdrom3).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 1 (x86) (cdrom1).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 2 (x86) (cdrom2).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 4 (x86) (cdrom4).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.update_source.cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 3 (x86) (cdrom3).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 1 (x86) (cdrom1).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 2 (x86) (cdrom2).cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.Installation CD 4 (x86) (cdrom4).cz] retrieving rpm files from medium "update_source"... ...retrieving done created transaction for installing on / (remove=0, install=0, upgrade=3) adding package XFree86-75dpi-fonts-4.3-32.3.100mdk.i586 (id=241, eid=241, update=1, file=/var/cache/urpmi/rpms/XFree86-75dpi-fonts-4.3-32.3.100mdk.i586.rpm) adding package XFree86-4.3-32.3.100mdk.i586 (id=240, eid=240, update=1, file=/var/cache/urpmi/rpms/XFree86-4.3-32.3.100mdk.i586.rpm) adding package libxfree86-4.3-32.3.100mdk.i586 (id=249, eid=249, update=1, file=/var/cache/urpmi/rpms/libxfree86-4.3-32.3.100mdk.i586.rpm) Gtk-WARNING **: gtk_widget_size_allocate(): attempt to allocate widget with width -1 and height -1 at /usr/lib/libDrakX/ugtk2.pm line 67. created transaction for installing on / (remove=0, install=0, upgrade=1) adding package XFree86-75dpi-fonts-4.3-32.3.100mdk.i586 (id=241, eid=241, update=1, file=/var/cache/urpmi/rpms/XFree86-75dpi-fonts-4.3-32.3.100mdk.i586.rpm) (Gecko:16879): Gtk-WARNING **: Unable to locate theme engine in module_path: "lighthouseblue", (gedit:16942): Gtk-WARNING **: Unable to locate theme engine in module_path: "lighthouseblue", (gedit:16988): Gtk-WARNING **: Unable to locate theme engine in module_path: "lighthouseblue", Quote Link to comment Share on other sites More sharing options...
adamw Posted April 12, 2005 Report Share Posted April 12, 2005 Try changing your GTK theme (from the GNOME config tools) and see if that helps. Quote Link to comment Share on other sites More sharing options...
Kieth Posted April 12, 2005 Author Report Share Posted April 12, 2005 In etc/hosts, I put 127.0.0.1 localhost.localdomain localhost, but it did not help. I'll try and change the GTK theme. Thanks Quote Link to comment Share on other sites More sharing options...
Kieth Posted April 14, 2005 Author Report Share Posted April 14, 2005 I hate to show my ignorance (again), but I can't find a GTK theme! :woops: Could you tell me where it is? Just another curiosity, though. If I change the GTK theme in GNOME, how does that affect KDE? I suppose I would already know the answer to that last question if I knew what the GTK theme was! Thanks for you help, I really do appreciate it. Kieth Quote Link to comment Share on other sites More sharing options...
adamw Posted April 14, 2005 Report Share Posted April 14, 2005 GTK apps in KDE will look a bit different, I guess. :) I'm not on a Linux machine right now (at my other job), but you need to go to system / configuration / GNOME, I think, and look for the option to configure GNOME's appearance. Then if you go to the last tab in the applet (it's probably Advanced or something like that) you can choose individual themes for the window manager and the application appearance - the one that changes how apps look is the GTK+ theme. Change that one. Quote Link to comment Share on other sites More sharing options...
Kieth Posted April 16, 2005 Author Report Share Posted April 16, 2005 I was trying to resolve another problem caused because I updated my programs, and ended up creating a lot of other problems, to the point that I could not even log in. Therefore I ended up doing a clean install. Now everything is obviously fine. Now I need to "tweek" my programs to get them where I like them. I appreciate the help, even though I goofed it all up. Kieth Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.