Hi I am using Mandriva 2008 on Compaq Presario C702TU. I find it very slow to boot though it is very swift and responsive after booting.
Here is the dmesg output. Please anybody suggest me what to do.
dmesg output
===========
Linux version 2.6.22.9-laptop-1mdv (lcapitulino@n5.mandriva.com) (gcc version 4.2.2 20070909 (prerelease) (4.2.2-0.RC.1mdv2008.0)) #1 SMP Thu Sep 27 04:17:10 CEST 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001f4d6000 (usable)
BIOS-e820: 000000001f4d6000 - 000000001f4e1000 (reserved)
BIOS-e820: 000000001f4e1000 - 000000001f52d000 (usable)
BIOS-e820: 000000001f52d000 - 000000001f530000 (reserved)
BIOS-e820: 000000001f530000 - 000000001f5bb000 (usable)
BIOS-e820: 000000001f5bb000 - 000000001f5bf000 (reserved)
BIOS-e820: 000000001f5bf000 - 000000001f67c000 (usable)
BIOS-e820: 000000001f67c000 - 000000001f6bf000 (ACPI NVS)
BIOS-e820: 000000001f6bf000 - 000000001f700000 (ACPI data)
BIOS-e820: 000000001f700000 - 0000000020000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
502MB LOWMEM available.
found SMP MP-table at 000fe270
Entering add_active_range(0, 0, 128636) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 128636
HighMem 128636 -> 128636
early_node_map[1] active PFN ranges
0: 0 -> 128636
On node 0 totalpages: 128636
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 972 pages used for memmap
Normal zone: 123568 pages, LIFO batch:31
HighMem zone: 0 pages used for memmap
DMI 2.4 present.
ACPI: RSDP 000FE020, 0024 (r2 HP )
ACPI: XSDT 1F6FE120, 006C (r1 HPQOEM SLIC-MPC 1 1000013)
ACPI: FACP 1F6FD000, 00F4 (r4 HP SPARTAN 1 LOHR 0)
ACPI: DSDT 1F6F5000, 7E50 (r1 HP SPARTAN 1 LOHR 0)
ACPI: FACS 1F67F000, 0040
ACPI: APIC 1F6F4000, 0068 (r2 HPQOEM SLIC-MPC 1 LOHR 0)
ACPI: HPET 1F6F3000, 0038 (r1 HPQOEM SLIC-MPC 1 LOHR 0)
ACPI: MCFG 1F6F2000, 003C (r1 HPQOEM SLIC-MPC 1 LOHR 0)
ACPI: ASF! 1F6F1000, 00A5 (r32 HPQOEM SLIC-MPC 1 LOHR 0)
ACPI: SLIC 1F6F0000, 0176 (r1 HPQOEM SLIC-MPC 1 LOHR 0)
ACPI: BOOT 1F6EF000, 0028 (r1 HPQOEM SLIC-MPC 1 LOHR 0)
ACPI: SSDT 1F6EE000, 05D7 (r1 PmRef Cpu0Cst 3001 INTL 20051117)
ACPI: SSDT 1F6ED000, 04C4 (r1 PmRef CpuPm 3000 INTL 20051117)
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 30000000 (gap: 20000000:c0000000)
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
swsusp: Registered nosave memory region: 000000001f4d6000 - 000000001f4e1000
swsusp: Registered nosave memory region: 000000001f52d000 - 000000001f530000
swsusp: Registered nosave memory region: 000000001f5bb000 - 000000001f5bf000
Built 1 zonelists. Total pages: 127632
Kernel command line: BOOT_IMAGE=linux root=/dev/sda1 vga=788
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
Detected 1729.163 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 504828k/514544k available (2129k kernel code, 8556k reserved, 689k data, 280k init, 0k highmem, 0k BadRAM)
virtual kernel memory layout:
fixmap : 0xffe16000 - 0xfffff000 (1956 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xe0000000 - 0xff7fe000 ( 503 MB)
lowmem : 0xc0000000 - 0xdf67c000 ( 502 MB)
.init : 0xc03c8000 - 0xc040e000 ( 280 kB)
.data : 0xc0314767 - 0xc03c0c84 ( 689 kB)
.text : 0xc0100000 - 0xc0314767 (2129 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
Calibrating delay using timer specific routine.. 3461.35 BogoMIPS (lpj=17306759)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: afebfbff 20100000 00000000 00000000 0000e31d 00000000 00000001
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
CPU: After all inits, caps: afebfbff 20100000 00000000 00003940 0000e31d 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
Early unpacking initramfs... done
Freeing initrd memory: 502k freed
ACPI: Core revision 20070126
ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
CPU0: Intel® Celeron® M CPU 530 @ 1.73GHz stepping 0a
Total of 1 processors activated (3461.35 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Brought up 1 CPUs
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
ACPI: System BIOS is requesting _OSI(Linux)
ACPI: Please test with "acpi_osi=!Linux"
Please send dmidecode to linux-acpi@vger.kernel.org
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
Linux Plug and Play Support v0.97 © Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
ACPI: RTC can wake from S4
pnp: 00:01: ioport range 0x164e-0x164f has been reserved
pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
pnp: 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
Time: tsc clocksource has been installed.
Switched to high resolution mode on CPU 0
PCI: Bridge: 0000:00:1c.0
IO window: 2000-2fff
MEM window: 31300000-323fffff
PREFETCH window: 30000000-30ffffff
PCI: Bridge: 0000:00:1e.0
IO window: 1000-1fff
MEM window: 31200000-312fffff
PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 18 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.0 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 196608 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
Simple Boot Flag value 0x5 read from CMOS RAM was invalid
Simple Boot Flag at 0x44 set to 0x1
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1200226774.660:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:00:02.0
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
Allocate Port Service[0000:00:1c.0:pcie03]
vesafb: framebuffer at 0x20000000, mapped to 0xe0080000, using 3750k, total 7616k
vesafb: mode is 800x600x16, linelength=1600, pages=6
vesafb: protected mode interface info at 00ff:44f0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
hpet_resources: 0xfed00000 is busy
Generic RTC Driver v1.07
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input0
TCP cubic registered
NET: Registered protocol family 1
Using IPI No-Shortcut mode
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
Freeing unused kernel memory: 280k freed
SCSI subsystem initialized
libata version 2.21 loaded.
ahci 0000:00:1f.2: version 2.2
ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 17 (level, low) -> IRQ 17
ahci 0000:00:1f.2: nr_ports (3) and implemented port map (0x1) don't match
input: PS/2 Mouse as /class/input/input1
input: AlpsPS/2 ALPS GlidePoint as /class/input/input2
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x1 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ahci
ata1: SATA max UDMA/133 cmd 0xe001a100 ctl 0x00000000 bmdma 0x00000000 irq 17
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7: Hitachi HTS541680J9SA00, SB2OC7BP, max UDMA/100
ata1.00: 156301488 sectors, multi 16: LBA48
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54168 SB2O PQ: 0 ANSI: 5
ata_piix 0000:00:1f.1: version 2.11
ACPI: PCI Interrupt 0000:00:1f.1 -> GSI 19 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1f.1 to 64
scsi1 : ata_piix
scsi2 : ata_piix
ata2: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000130a0 irq 14
ata3: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x000130a8 irq 15
ata2.00: ATAPI: Optiarc DVD RW AD-7560A, DH10, max MWDMA2
ata2.00: configured for MWDMA2
scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7560A DH10 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Attached scsi generic sg1 type 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
ieee80211_crypt: registered algorithm 'NULL'
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright © 2004-2005 Intel Corporation <jketreno@linux.intel.com>
Linux agpgart interface v0.102 © Dave Jones
agpgart: Detected an Intel 965GM Chipset.
agpgart: Detected 7676K stolen memory.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
agpgart: AGP aperture is 256M @ 0x20000000
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[D] -> GSI 21 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 19, io base 0x00003080
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
bcm43xx driver
ACPI: PCI Interrupt 0000:00:1d.1 -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 20, io base 0x00003060
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 19 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003040
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
8139too Fast Ethernet driver 0.9.28
ACPI: PCI Interrupt 0000:00:1f.3[D] -> GSI 19 (level, low) -> IRQ 18
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:01:00.0 to 64
bcm43xx: Chip ID 0x4311, rev 0x2
bcm43xx: Number of cores: 4
bcm43xx: Core 0: ID 0x800, rev 0x13, vendor 0x4243
bcm43xx: Core 1: ID 0x812, rev 0xd, vendor 0x4243
bcm43xx: Unsupported 80211 core revision 13
bcm43xx: Core 2: ID 0x817, rev 0x4, vendor 0x4243
bcm43xx: Core 3: ID 0x820, rev 0x5, vendor 0x4243
bcm43xx: PHY connected
bcm43xx: Detected PHY: Analog: 4, Type 2, Revision 9
bcm43xx: Invalid PHY Revision 9
bcm43xx: Detected Radio: ID: 2205017f (Manuf: 17f Ver: 2050 Rev: 2)
bcm43xx: Radio turned off
bcm43xx: Radio turned off
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 22, io mem 0x32404800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 16 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:02:01.0 to 64
eth1: RealTek RTL8139 at 0xe0040000, 00:1b:38:7b:06:c8, IRQ 21
eth1: Identified 8139 chip type 'RTL-8100B/8139D'
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1b.0 to 64
8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
usb 4-5: new high speed USB device using ehci_hcd and address 2
Non-volatile memory driver v1.2
usb 4-5: configuration #1 chosen from 1 choice
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Initializing USB Mass Storage driver...
scsi3 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
floppy0: no floppy controllers found
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
EXT3 FS on sda1, internal journal
scsi 3:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
sd 3:0:0:0: [sdb] Attached SCSI removable disk
sd 3:0:0:0: Attached scsi generic sg2 type 0
usb-storage: device scan complete
Adding 385520k swap on /dev/sda5. Priority:-1 extents:1 across:385520k
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
loop: module loaded
ACPI: AC Adapter [AC] (on-line)
Netfilter messages via NETLINK v0.30.
ACPI: Battery Slot [bAT0] (battery present)
nf_conntrack version 0.5.0 (4019 buckets, 32152 max)
Removing netfilter NETLINK layer.
No dock devices found.
input: Power Button (FF) as /class/input/input3
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input4
ACPI: Power Button (CM) [PWRB]
input: Lid Switch as /class/input/input5
ACPI: Lid Switch [LID0]
input: Sleep Button (CM) as /class/input/input6
ACPI: Sleep Button (CM) [sLPB]
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126]
ACPI: Thermal Zone [TZ01] (0 C)
ACPI: Video Device [OVGA_PCI0] (multi-head: yes rom: no post: no)
Marking TSC unstable due to: possible TSC halt in C2.
Time: hpet clocksource has been installed.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Mobile IPv6
NET: Registered protocol family 17
eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
Clocksource tsc unstable (delta = -366304546 ns)
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 21
[drm] Initialized i915 1.6.0 20060119 on minor 0
NET: Registered protocol family 4
NET: Registered protocol family 5
usb 4-2: new high speed USB device using ehci_hcd and address 3
usb 4-2: configuration #1 chosen from 1 choice
scsi4 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
scsi 4:0:0:0: Direct-Access JetFlash TS512MJFV30 0.00 PQ: 0 ANSI: 2
sd 4:0:0:0: [sdc] 1007616 512-byte hardware sectors (516 MB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 00 00 00 00
sd 4:0:0:0: [sdc] Assuming drive cache: write through
sd 4:0:0:0: [sdc] 1007616 512-byte hardware sectors (516 MB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 00 00 00 00
sd 4:0:0:0: [sdc] Assuming drive cache: write through
sdc: sdc1
sd 4:0:0:0: [sdc] Attached SCSI removable disk
sd 4:0:0:0: Attached scsi generic sg3 type 0
usb-storage: device scan complete
usb 4-2: USB disconnect, address 3
eth1: link down
eth1: link down
ADDRCONF(NETDEV_UP): eth1: link is not ready
eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
