daniewicz Posted December 26, 2009 Report Share Posted December 26, 2009 Try resetting the modem? Quote Link to comment Share on other sites More sharing options...
rogerh Posted December 26, 2009 Author Report Share Posted December 26, 2009 (edited) Cleared cache, powered down entire system (including DSL modem) - no change. Seems like the system gets to the point of loading the 'next' page, and something holds it back and it just stalls..... Thanks for the help - hopefully there is nothing you like better than a knotty linux problem. Merry Christmas!!!! Edited December 26, 2009 by rogerh Quote Link to comment Share on other sites More sharing options...
daniewicz Posted December 26, 2009 Report Share Posted December 26, 2009 Are you running 2008.0 or 2008.1? Quote Link to comment Share on other sites More sharing options...
rogerh Posted December 26, 2009 Author Report Share Posted December 26, 2009 2008.1 according to the disks.... Quote Link to comment Share on other sites More sharing options...
daniewicz Posted December 26, 2009 Report Share Posted December 26, 2009 OK, I am running 2008.1 as well with a DSL ethernet connection. Not that this will be of any help! :P Are there any errors or issues mentioned in dmesg? My /etc/sysconfig/network-scripts/ifcfg-eth0 looks like this. How does this compare with yours? DEVICE=eth0 BOOTPROTO=dhcp NETMASK=255.255.255.0 ONBOOT=yes METRIC=10 Quote Link to comment Share on other sites More sharing options...
rogerh Posted December 26, 2009 Author Report Share Posted December 26, 2009 (edited) /etc/sysconfig/network-scripts/ifcfg-eth0 is exactly the same as you have. I have been running a modem, with no changes to the firewall. Is the treatment of DSL vs modem different for the firewall, and is an adjustment there required?? Perhaps that could explain why the authentication sites are problematic?? I did find where the DNS was set, but did not see any kind of control panel for the firewall. I have noticed a lot more scanning attacks since I went to DSL..... Edited December 26, 2009 by rogerh Quote Link to comment Share on other sites More sharing options...
daniewicz Posted December 26, 2009 Report Share Posted December 26, 2009 Are you using the Mandriva firewall? Try turning this off temporarily. Also, have a look in dmesg. Quote Link to comment Share on other sites More sharing options...
rogerh Posted December 26, 2009 Author Report Share Posted December 26, 2009 Given the amount of action the firewall is getting (maybe it is just Christmas cheer.....) I am a bit hesitant to turn it off. What is dmesg and where do I look for it?? Quote Link to comment Share on other sites More sharing options...
daniewicz Posted December 26, 2009 Report Share Posted December 26, 2009 Well your modem should have an active firewall as well correct? Turning off the Mandriva firewall temporarily should be OK. If you type dmesg from a terminal as root, you will get a recent list of warnings, notices, errors, etc. that the OS is reporting. Quote Link to comment Share on other sites More sharing options...
rogerh Posted December 26, 2009 Author Report Share Posted December 26, 2009 The adsl modem came from my ISP and is a d-link 2320b - I don't think there is anything near a firewall in there (if there is, it is missing a lot that is hitting Linux). Maybe the modem is the problem - probably pretty inexpensive item. I will call the ISP on Monday and see if they have any insight. I am pretty sure that they don't provide much, if any, in the way of any Linux support. Quote Link to comment Share on other sites More sharing options...
daniewicz Posted December 26, 2009 Report Share Posted December 26, 2009 My Westell modem (AT&T DSL) has a web-based gui for configuration of the modem (including firewall settings). Does your modem have something similar? Quote Link to comment Share on other sites More sharing options...
Greg2 Posted December 26, 2009 Report Share Posted December 26, 2009 The adsl modem came from my ISP and is a d-link 2320b - I don't think there is anything near a firewall in there Your DSL-2320B has both a firewall and a web-based GUI to modify your settings. Simply click on: http://192.168.1.1 then enter your user name and password or the admin and admin password. More info here: http://www.dlink.com/products/?pid=554 Quote Link to comment Share on other sites More sharing options...
rogerh Posted December 26, 2009 Author Report Share Posted December 26, 2009 Interesting enough, I can't load that page via DSL to get the information. Hopefully I can get in via modem, find the info I need, and I assume backward configure the DSL modem. Not sure how this works, but it sounds interesting!! Looks like a solution may be at hand!! Thanks -- Roger Quote Link to comment Share on other sites More sharing options...
rogerh Posted December 27, 2009 Author Report Share Posted December 27, 2009 I read through the info on the D-link site, but doesn't seem to cover the firewall or what the GUI looks like. I did try to log in on http://192.168.1.1, but it keeps rejecting my login efforts. The website indicates 'admin' and blank are the defaults (didn't work), "admin" and my admin password (didn't work), and user and user password (didn't work). Not sure if this is an artifact of the modem problem or something else.... I sort of assumed the link was pretty direct and should work? On a slightly different topic (assuming I do get in to configure the modem). I am a novice at the firewall stuff, and I plan on not moving from a single computer configuration (the modem will only be serving my home computer). How should I configure the setup?? My plan was to rely on the Linux firewall, and not use the modem firewall (having both may be causing my grief, I guess). Suggestions and reasoning will be helpful. I also could use some guidance on what I will be seeing on the GUI and what actions to take (unless it is pretty obvious). I am a bit out of my depth here... Thanks -- Roger Quote Link to comment Share on other sites More sharing options...
rogerh Posted December 27, 2009 Author Report Share Posted December 27, 2009 (edited) I did manage to login to the GUI - missed the "admin" and "admin" until I found the manual on a different site and downloaded. Looks like the following features are disabled - firewall, IGMP multicast, NAT, and Quality of Service. Any hints as to what I need to access or change to try to address my access problem would be appreciated.... With my very limited knowledge, it looks like the lack of NAT could be contributing to my problem?? Regards -- Roger Edited December 27, 2009 by rogerh Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.