Jump to content

another video driver problem :(


ilia_kr
 Share

Recommended Posts

Can you copy a few lines of Xorg.0.log which show where the old kernel is mentioned and post here?

 

sure, here it is:

 

X.Org X Server 1.6.1
Release Date: 2009-4-14
X Protocol Version 11, Revision 0
Build Operating System: Linux_2.6.27.19-server-1mnb Mandriva
Current Operating System: Linux mdv 2.6.29.3-desktop586-1mnb #1 SMP Thu May 14 13:59:03 EDT 2009 i686
Build Date: 26 May 2009  04:51:37AM

Before reporting problems, check [url="http://qa.mandriva.com"]http://qa.mandriva.com[/url]
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Jun  1 21:43:15 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "layout1"
(**) |-->Screen "screen1" (0)
(**) |   |-->Monitor "monitor1"
(**) |   |-->Device "device1"
(**) |-->Input Device "Keyboard1"
(**) |-->Input Device "Mouse1"
(**) Option "AllowMouseOpenFail"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
catalogue:/etc/X11/fontpath.d,
built-ins
(==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Keyboard1
(WW) Disabling Mouse1
(II) Loader magic: 0x3bc0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7

(--) PCI:*(0@1:0:0) nVidia Corporation NV25 [GeForce4 Ti 4400] rev 162, Mem @ 0xfd000000/16777216, 0xe0000000/134217728, 0xefd80000/524288,
BIOS @ 0x????????/131072
(--) PCI: (0@2:12:0) Brooktree Corporation Bt878 Video Capture rev 17, Mem @ 0xefefe000/4096
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[b]
(WW) "dri" will not be loaded unless you've specified it to be loaded elsewhere.
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded even though the default is to disable it.
(II) "dri2" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "v4l"
(II) Loading /usr/lib/xorg/modules/drivers//v4l_drv.so
(II) Module v4l: vendor="X.Org Foundation"
compiled for 1.5.99.3, module version = 0.1.1
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension Multi-Buffering
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(WW) Warning, couldn't open module type1
(II) UnloadModule: "type1"
(EE) Failed to load module "type1" (module does not exist, 0)
(II) LoadModule: "freetype"
(WW) Warning, couldn't open module freetype
(II) UnloadModule: "freetype"
(EE) Failed to load module "freetype" (module does not exist, 0)
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/extra-modules//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module  96.43.11  Mon Feb 23 15:43:14 PST 2009
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) v4l driver for Video4Linux
(II) NVIDIA dlloader X Driver  96.43.11  Mon Feb 23 15:32:04 PST 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(WW) Falling back to old probe method for v4l
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[b]
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "IgnoreEDID" "1"
(**) NVIDIA(0): Option "RenderAccel" "false"
(**) NVIDIA(0): Option "AddARGBGLXVisuals"
(**) NVIDIA(0): Option "DynamicTwinView" "false"
(**) NVIDIA(0): Disabling RENDER acceleration
(WW) NVIDIA(0): 
(WW) NVIDIA(0): The IgnoreEDID and NoDDC options have been deprecated.  The
(WW) NVIDIA(0):     NVIDIA X driver makes use of a display device's EDID
(WW) NVIDIA(0):     during construction of its modePool.  It is recommended
(WW) NVIDIA(0):     that you allow the X driver to make use of any available
(WW) NVIDIA(0):     EDID.  If, however, you know what you are doing and have
(WW) NVIDIA(0):     good reason to do so, you can disable the X driver's use
(WW) NVIDIA(0):     of EDIDs by setting the "UseEDID" X configuration option
(WW) NVIDIA(0):     to FALSE; e.g.,
(WW) NVIDIA(0): 
(WW) NVIDIA(0):   Option "UseEDID" "FALSE"
(WW) NVIDIA(0): 
(WW) NVIDIA(0): Note that, rather than globally disable all uses of the EDID,
(WW) NVIDIA(0):     you can individually disable each particular use of the
(WW) NVIDIA(0):     EDID; e.g.,
(WW) NVIDIA(0): 
(WW) NVIDIA(0):   Option "UseEDIDFreqs" "FALSE"
(WW) NVIDIA(0):   Option "UseEDIDDpi" "FALSE"
(WW) NVIDIA(0):   Option "ModeValidation" "NoEdidModes"
(WW) NVIDIA(0): 
(WW) NVIDIA(0): See Appendix D: X Config Options in the README for details on
(WW) NVIDIA(0):     each of these options.
(WW) NVIDIA(0): 
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0):     enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce4 Ti 4400 at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 131072 kBytes
(--) NVIDIA(0): VideoBIOS: 04.25.00.26.00
(II) NVIDIA(0): Detected AGP rate: 4X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce4 Ti 4400 at PCI:1:0:0:
(--) NVIDIA(0):     LG L1970HR (CRT-1)
(--) NVIDIA(0): LG L1970HR (CRT-1): 350.0 MHz maximum pixel clock
(II) NVIDIA(0): Assigned Display Device: CRT-1
(WW) NVIDIA(0): No valid modes for "480x360"; removing.
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0):     "1280x1024"
(II) NVIDIA(0):     "1152x864"
(II) NVIDIA(0):     "1024x768"
(II) NVIDIA(0):     "832x624"
(II) NVIDIA(0):     "800x600"
(II) NVIDIA(0):     "640x480"
(II) NVIDIA(0):     "320x240"
(II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
(--) NVIDIA(0): DPI set to (85, 86); computed from "UseEdidDpi" X config
(--) NVIDIA(0):     option
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[b]
(II) NVIDIA(0): Initialized GART.
(II) NVIDIA(0): Setting mode "1280x1024"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.2.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "compose:rwin"
(II) config/hal: Adding input device Power Button (CM)
(**) Power Button (CM): always reports core events
(**) Power Button (CM): Device: "/dev/input/event3"
(II) Power Button (CM): Found keys
(II) Power Button (CM): Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button (CM)" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "compose:rwin"
(II) config/hal: Adding input device Power Button (FF)
(**) Power Button (FF): always reports core events
(**) Power Button (FF): Device: "/dev/input/event2"
(II) Power Button (FF): Found keys
(II) Power Button (FF): Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button (FF)" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "compose:rwin"
(II) config/hal: Adding input device ImPS/2 Generic Wheel Mouse
(**) ImPS/2 Generic Wheel Mouse: always reports core events
(**) ImPS/2 Generic Wheel Mouse: Device: "/dev/input/event1"
(II) ImPS/2 Generic Wheel Mouse: Found 3 mouse buttons
(II) ImPS/2 Generic Wheel Mouse: Found x and y relative axes
(II) ImPS/2 Generic Wheel Mouse: Found scroll wheel(s)
(II) ImPS/2 Generic Wheel Mouse: Configuring as mouse
(**) ImPS/2 Generic Wheel Mouse: YAxisMapping: buttons 4 and 5
(**) ImPS/2 Generic Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE)
(**) ImPS/2 Generic Wheel Mouse: (accel) keeping acceleration scheme 1
(**) ImPS/2 Generic Wheel Mouse: (accel) filter chain progression: 2.00
(**) ImPS/2 Generic Wheel Mouse: (accel) filter stage 0: 20.00 ms
(**) ImPS/2 Generic Wheel Mouse: (accel) set acceleration profile 0

 

my kernel is:

Linux mdv 2.6.29.3-desktop586-1mnb #1 SMP Thu May 14 13:59:03 EDT 2009 i686 Intel® Pentium® 4 CPU 2.40GHz GNU/Linux

Edited by ilia_kr
Link to comment
Share on other sites

  • Replies 39
  • Created
  • Last Reply

Top Posters In This Topic

Can you try switching back to the default theme and icon set and see if it improves? I've had problems with Gnome before when it got updated, and I was using themes or icon sets for older releases of Gnome.

Link to comment
Share on other sites

I am just throwing out ideas here.

 

Is there a 2.6.29.3-desktop-1mnb kernel you could use instead of 2.6.29.3-desktop586-1mnb? As I understand things, the 586 version is made to be compatible with a wide range of older hardware and could be giving you a problem.

Link to comment
Share on other sites

[ilia@mdv ~]$ cat /proc/driver/nvidia/agp/status
Status: 	 Enabled
Driver: 	 AGPGART
AGP Rate: 	 4x
Fast Writes: 	 Disabled
SBA: 		 Disabled
[ilia@mdv ~]$

 

What about compiling the nVidia drivers from their site? Should it work?

Link to comment
Share on other sites

There are premade for Mandy 2009.1, and they are autoupdated via DKMS every time you upgrade kernel, but you can also use the binary from nvidia. The procedure there is standard:

1. Download the binary and make it executable ( chmod +x blah )

2. Install kernel headers for your running kernel

3. Go to runlevel 3, login as root, and run the nvidia binary. You will have to answer just a couple of easy questions.

The driver is rather kernel-depandent, and less x-server dependent. Using Mandy 9001.1 there are good chances you will still use either the "nv" or "vesa" driver even after installing the proprietary driver, because there is no xorg.conf file. You can easily remedy that by running as root

# nvidia-xconfig

or maybe

# nvidia-xconfig --composite

 

(the second one also enables native compositing via aiglx)

and then, restart the xserver.

Link to comment
Share on other sites

I installed the latest 96.43.11 driver from their site, it was easy but didn't change a thing. Then I decided to install earlier version (96.43.05) also downloaded from their site but this time installer told me that i have no suitable kernel sources. Weird...

 

So, for now i have excellent 3D and no(?) 2D acceleration.

Link to comment
Share on other sites

You said previously that you use GeForce4 card too. Do you use it on Mandriva 2009.1 and is working ok?

 

I use Mandriva 2008.1

 

Then I decided to install earlier version (96.43.05) also downloaded from their site but this time installer told me that i have no suitable kernel sources. Weird...

 

I have seen that kind of problem as well when trying older versions of their drivers.

 

So, for now i have excellent 3D and no(?) 2D acceleration.

 

I don't have any other suggestions I can offer. I wish I did.

Link to comment
Share on other sites

Ooops, sorry- I saw it late:

 

Build Operating System: Linux_2.6.27.19-server-1mnb Mandriva

 

The "server" kernel will not work with the proprietary nvidia driver. You need either e "desktop" kernel, or a patch for the server kernel (although I have no idea how that patch could probably be... sorry).

Edited by scarecrow
Link to comment
Share on other sites

I seriously don't know how did that line got to my logs, but i've never used server kernels

[ilia@mdv ~]$ uname -a
Linux mdv 2.6.29.3-desktop586-1mnb #1 SMP Thu May 14 13:59:03 EDT 2009 i686 Intel(R) Pentium(R) 4 CPU 2.40GHz GNU/Linux
[ilia@mdv ~]$

Link to comment
Share on other sites

My Xorg.0.log looks similar scarecrow. I am running 2.6.24.7-desktop-2mnb and have never run 2.6.24.5-server-2mnb.

 

X.Org X Server 1.4.0.90

Release Date: 5 September 2007

X Protocol Version 11, Revision 0

Build Operating System: Linux_2.6.24.5-server-2mnb Mandriva

Current Operating System: Linux localhost 2.6.24.7-desktop-2mnb #1 SMP Thu Oct 30 18:03:14 EDT 2008 i686

Build Date: 16 September 2008 04:45:14PM

Edited by daniewicz
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share


×
×
  • Create New...