SoulSe Posted October 9, 2003 Report Share Posted October 9, 2003 I decided to move this to a new thread as the old one was all over the place and stagnating. My X is freezing in Gentoo, but only at certain places: When I open Mozilla and try to type in an address, X freezes - in fact, anywhere where I try and type in Mozilla (or Firebird) it freezes, I tried to add a user yesterday and this happened. I know this is a strange example, but it also freezes when I play Gnibbles, but only when I touch a 'fruit' These freezes are religious and strong, I need to hard-reset my machine every time. I completely redid my computer in a desperate attempt to rid myself of these feezes, but they still occur. I have managed to clean up my X logs and no serious errors occur. I have tried using my XF86Config file from my Mandrake setup and it did not help. The Nvidia module is loading without a hitch and GLX is up and running, my screen is setup properly. These freezes occur in Gnome and also is solo-Fluxbox (I haven't tried any other WMs). I am totally stuck and if I can't get this sorted out soon I am going to have to write Gentoo off and I don't want to, because I have spent an incredible amount of time on this. EDIT: I am starting to believe that this might be either a keyboard or a font-server problem, but I have no way to tell. Where can I confirm what my keyboard layout is? And what other keyboard drivers can I use, besides the default "keyboard" and how could I test the font server? If I type something in Gnome terminal, for example, it doesn't freeze. Quote Link to comment Share on other sites More sharing options...
SoulSe Posted October 9, 2003 Author Report Share Posted October 9, 2003 Ok, here is my X log: XFree86 Version 4.3.0 Release Date: 27 February 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.21-pfeifer-r1_pre4 i686 [ELF] Build Date: 11 September 2003 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Thu Oct 9 03:23:43 2003 (==) Using config file: "/etc/X11/XF86Config" (==) ServerLayout "Simple Layout" (**) |-->Screen "Screen1" (0) (**) | |-->Monitor "rectron" (**) | |-->Device "geforce4" (**) |-->Input Device "Mouse1" (**) |-->Input Device "Keyboard1" (**) Option "XkbRules" "xfree86" (**) XKB: rules: "xfree86" (**) Option "XkbModel" "pc101" (**) XKB: model: "pc101" (**) Option "XkbLayout" "us" (**) XKB: layout: "us" (==) Keyboard: CustomKeycode disabled (**) FontPath set to "/usr/X11R6/lib/X11/fonts/local/ ,/usr/X11R6/lib/X11/fonts/misc/ ,/usr/X11R6/lib/X11/fonts/75dpi/ :unscaled,/usr/X11R6/lib/X11/fonts/100dpi/ :unscaled,/usr/X11R6/lib/X11/fonts/Speedo/ ,/usr/X11R6/lib/X11/fonts/Type1/ ,/usr/X11R6/lib/X11/fonts/75dpi/ ,/usr/X11R6/lib/X11/fonts/100dpi/" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (**) ModulePath set to "/usr/X11R6/lib/modules/" (++) using VT number 7 (WW) Open APM failed (/dev/apm_bios) (No such file or directory) (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x8000002c, mode1Res1 = 0x80000000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1106,0391 card 0000,0000 rev 02 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 1106,8391 card 0000,0000 rev 00 class 06,04,00 hdr 01 (II) PCI: 00:07:0: chip 1106,0686 card 1106,0000 rev 21 class 06,01,00 hdr 80 (II) PCI: 00:07:1: chip 1106,0571 card 0000,0000 rev 10 class 01,01,8a hdr 00 (II) PCI: 00:07:2: chip 1106,3038 card 0925,1234 rev 10 class 0c,03,00 hdr 00 (II) PCI: 00:07:4: chip 1106,3057 card 0000,0000 rev 30 class 06,00,00 hdr 00 (II) PCI: 00:07:5: chip 1106,3058 card 1106,4511 rev 20 class 04,01,00 hdr 00 (II) PCI: 00:09:0: chip 1045,c861 card 1045,c861 rev 10 class 0c,03,10 hdr 00 (II) PCI: 00:0a:0: chip 10ec,8139 card 10ec,8139 rev 10 class 02,00,00 hdr 00 (II) PCI: 01:00:0: chip 10de,0171 card 0000,0000 rev a3 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set) (II) Bus 1 non-prefetchable memory range: [0] -1 0 0xe4000000 - 0xe5ffffff (0x2000000) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:7:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (II) Host-to-PCI bridge: (II) Bus -1: bridge is at (0:7:4), (-1,-1,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus -1 I/O range: [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus -1 non-prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus -1 prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (--) PCI:*(1:0:0) nVidia Corporation NV17 [GeForce4 MX 440] rev 163, Mem @ 0xe4000000/24, 0xd0000000/27, 0xd8000000/19 (II) Addressable bus resource ranges are [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) PCI Memory resource overlap reduced 0xe0000000 from 0xe3ffffff to 0xdfffffff (II) Active PCI resource ranges: [0] -1 0 0xe6001000 - 0xe60010ff (0x100) MX[B] [1] -1 0 0xe6000000 - 0xe6000fff (0x1000) MX[B] [2] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O [3] -1 0 0xd8000000 - 0xd807ffff (0x80000) MX[B](B) [4] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B) [5] -1 0 0xe4000000 - 0xe4ffffff (0x1000000) MX[B](B) [6] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B] [7] -1 0 0x0000e400 - 0x0000e403 (0x4) IX[B] [8] -1 0 0x0000e000 - 0x0000e003 (0x4) IX[B] [9] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B] [10] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B] [11] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[B] (II) Active PCI resource ranges after removing overlaps: [0] -1 0 0xe6001000 - 0xe60010ff (0x100) MX[B] [1] -1 0 0xe6000000 - 0xe6000fff (0x1000) MX[B] [2] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O [3] -1 0 0xd8000000 - 0xd807ffff (0x80000) MX[B](B) [4] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B) [5] -1 0 0xe4000000 - 0xe4ffffff (0x1000000) MX[B](B) [6] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B] [7] -1 0 0x0000e400 - 0x0000e403 (0x4) IX[B] [8] -1 0 0x0000e000 - 0x0000e003 (0x4) IX[B] [9] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B] [10] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B] [11] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[B] (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) All system resource ranges: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xe6001000 - 0xe60010ff (0x100) MX[B] [6] -1 0 0xe6000000 - 0xe6000fff (0x1000) MX[B] [7] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O [8] -1 0 0xd8000000 - 0xd807ffff (0x80000) MX[B](B) [9] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B) [10] -1 0 0xe4000000 - 0xe4ffffff (0x1000000) MX[B](B) [11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [13] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B] [14] -1 0 0x0000e400 - 0x0000e403 (0x4) IX[B] [15] -1 0 0x0000e000 - 0x0000e003 (0x4) IX[B] [16] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B] [17] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B] [18] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[B] (II) LoadModule: "glx" (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so (II) Module glx: vendor="NVIDIA Corporation" compiled for 4.0.2, module version = 1.0.4363 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.1 (II) Loading extension GLX (II) LoadModule: "nvidia" (II) Loading /usr/X11R6/lib/modules/drivers/nvidia_drv.o (II) Module nvidia: vendor="NVIDIA Corporation" compiled for 4.0.2, module version = 1.0.4363 Module class: XFree86 Video Driver (II) LoadModule: "mouse" (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o (II) Module mouse: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 XInput Driver ABI class: XFree86 XInput driver, version 0.4 (II) NVIDIA XFree86 Driver 1.0-4363 Sat Apr 19 17:49:42 PDT 2003 (II) NVIDIA Unified Driver for all NVIDIA GPUs (II) Primary Device is: PCI 01:00:0 (--) Assigning device section with no busID to primary device (--) Chipset NVIDIA GPU found (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xe6001000 - 0xe60010ff (0x100) MX[B] [6] -1 0 0xe6000000 - 0xe6000fff (0x1000) MX[B] [7] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O [8] -1 0 0xd8000000 - 0xd807ffff (0x80000) MX[B](B) [9] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B) [10] -1 0 0xe4000000 - 0xe4ffffff (0x1000000) MX[B](B) [11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [13] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B] [14] -1 0 0x0000e400 - 0x0000e403 (0x4) IX[B] [15] -1 0 0x0000e000 - 0x0000e003 (0x4) IX[B] [16] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B] [17] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B] [18] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[B] (II) resource ranges after probing: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xe6001000 - 0xe60010ff (0x100) MX[B] [6] -1 0 0xe6000000 - 0xe6000fff (0x1000) MX[B] [7] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O [8] -1 0 0xd8000000 - 0xd807ffff (0x80000) MX[B](B) [9] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B) [10] -1 0 0xe4000000 - 0xe4ffffff (0x1000000) MX[B](B) [11] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [12] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [13] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [16] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B] [17] -1 0 0x0000e400 - 0x0000e403 (0x4) IX[B] [18] -1 0 0x0000e000 - 0x0000e003 (0x4) IX[B] [19] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B] [20] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B] [21] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[B] [22] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [23] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/X11R6/lib/modules/libvgahw.a (II) Module vgahw: vendor="The XFree86 Project" compiled for 4.3.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.6 (**) NVIDIA(0): Depth 16, (--) framebuffer bpp 16 (==) NVIDIA(0): RGB weight 565 (==) NVIDIA(0): Default visual is TrueColor (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) (--) NVIDIA(0): Linear framebuffer at 0xD0000000 (--) NVIDIA(0): MMIO registers at 0xE4000000 (II) NVIDIA(0): NVIDIA GPU detected as: GeForce4 MX 440 (--) NVIDIA(0): VideoBIOS: 04.17.00.45.a3 (--) NVIDIA(0): VideoRAM: 65536 kBytes (II) NVIDIA(0): Connected display device(s): CRT-0 (--) NVIDIA(0): Detected TV Encoder: NVIDIA (--) NVIDIA(0): Display device CRT-0: maximum pixel clock at 8 bpp: 350 MHz (--) NVIDIA(0): Display device CRT-0: maximum pixel clock at 16 bpp: 350 MHz (--) NVIDIA(0): Display device CRT-0: maximum pixel clock at 32 bpp: 350 MHz (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Loading /usr/X11R6/lib/modules/libddc.a (II) Module ddc: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) NVIDIA(0): rectron: Using hsync range of 31.50-64.30 kHz (II) NVIDIA(0): rectron: Using vrefresh value of 60.00 Hz (II) NVIDIA(0): Clock range: 12.00 to 350.00 MHz (II) NVIDIA(0): Not using default mode "640x350" (vrefresh out of range) (II) NVIDIA(0): Not using default mode "320x175" (vrefresh out of range) (II) NVIDIA(0): Not using default mode "640x400" (vrefresh out of range) (II) NVIDIA(0): Not using default mode "320x200" (vrefresh out of range) (II) NVIDIA(0): Not using default mode "720x400" (vrefresh out of range) (II) NVIDIA(0): Not using default mode "360x200" (vrefresh out of range) (II) NVIDIA(0): Not using default mode "640x480" (vrefresh out of range) (II) NVIDIA(0): Not using default mode "320x240" (vrefresh out of range) (II) NVIDIA(0): Not using default mode "640x480" (vrefresh out of range) (II) NVIDIA(0): Not using default mode "320x240" (vrefresh out of range) (II) NVIDIA(0): Not using default mode "640x480" (vrefresh out of range) (II) NVIDIA(0): Not using default mode "320x240" (vrefresh out of range) (II) NVIDIA(0): Not using default mode "800x600" (vrefresh out of range) (II) NVIDIA(0): Not using default mode "400x300" (vrefresh out of range) (II) NVIDIA(0): Not using default mode "800x600" (vrefresh out of range) (II) NVIDIA(0): Not using default mode "400x300" (vrefresh out of range) (II) NVIDIA(0): Not using default mode "800x600" (vrefresh out of range) (II) NVIDIA(0): Not using default mode "400x300" (vrefresh out of range) (II) NVIDIA(0): Not using default mode "800x600" (vrefresh out of range) (II) NVIDIA(0): Not using default mode "400x300" (vrefresh out of range) (II) NVIDIA(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan) (II) NVIDIA(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) NVIDIA(0): Not using default mode "1024x768" (vrefresh out of range) (II) NVIDIA(0): Not using default mode "512x384" (vrefresh out of range) (II) NVIDIA(0): Not using default mode "1024x768" (vrefresh out of range) (II) NVIDIA(0): Not using default mode "512x384" (vrefresh out of range) (II) NVIDIA(0): Not using default mode "1024x768" (hsync out of range) (II) NVIDIA(0): Not using default mode "512x384" (hsync out of range) (II) NVIDIA(0): Not using default mode "1152x864" (hsync out of range) (II) NVIDIA(0): Not using default mode "576x432" (hsync out of range) (II) NVIDIA(0): Not using default mode "1280x960" (hsync out of range) (II) NVIDIA(0): Not using default mode "640x480" (hsync out of range) (II) NVIDIA(0): Not using default mode "1280x1024" (hsync out of range) (II) NVIDIA(0): Not using default mode "640x512" (hsync out of range) (II) NVIDIA(0): Not using default mode "1280x1024" (hsync out of range) (II) NVIDIA(0): Not using default mode "640x512" (hsync out of range) (II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range) (II) NVIDIA(0): Not using default mode "800x600" (hsync out of range) (II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range) (II) NVIDIA(0): Not using default mode "800x600" (hsync out of range) (II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range) (II) NVIDIA(0): Not using default mode "800x600" (hsync out of range) (II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range) (II) NVIDIA(0): Not using default mode "800x600" (hsync out of range) (II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range) (II) NVIDIA(0): Not using default mode "800x600" (hsync out of range) (II) NVIDIA(0): Not using default mode "1792x1344" (hsync out of range) (II) NVIDIA(0): Not using default mode "896x672" (hsync out of range) (II) NVIDIA(0): Not using default mode "1792x1344" (hsync out of range) (II) NVIDIA(0): Not using default mode "896x672" (hsync out of range) (II) NVIDIA(0): Not using default mode "1856x1392" (hsync out of range) (II) NVIDIA(0): Not using default mode "928x696" (hsync out of range) (II) NVIDIA(0): Not using default mode "1856x1392" (hsync out of range) (II) NVIDIA(0): Not using default mode "928x696" (hsync out of range) (II) NVIDIA(0): Not using default mode "1920x1440" (hsync out of range) (II) NVIDIA(0): Not using default mode "960x720" (hsync out of range) (II) NVIDIA(0): Not using default mode "1920x1440" (hsync out of range) (II) NVIDIA(0): Not using default mode "960x720" (hsync out of range) (II) NVIDIA(0): Not using default mode "832x624" (vrefresh out of range) (II) NVIDIA(0): Not using default mode "416x312" (vrefresh out of range) (II) NVIDIA(0): Not using default mode "1152x768" (vrefresh out of range) (II) NVIDIA(0): Not using default mode "576x384" (vrefresh out of range) (WW) (1400x1050,rectron) mode clock 122MHz exceeds DDC maximum 110MHz (II) NVIDIA(0): Not using default mode "1400x1050" (hsync out of range) (II) NVIDIA(0): Not using default mode "700x525" (hsync out of range) (II) NVIDIA(0): Not using default mode "1920x1440" (hsync out of range) (II) NVIDIA(0): Not using default mode "960x720" (hsync out of range) (II) NVIDIA(0): Not using default mode "2048x1536" (hsync out of range) (II) NVIDIA(0): Not using default mode "1024x768" (hsync out of range) (II) NVIDIA(0): Not using default mode "2048x1536" (hsync out of range) (II) NVIDIA(0): Not using default mode "1024x768" (hsync out of range) (II) NVIDIA(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan) (II) NVIDIA(0): Not using default mode "1024x768" (hsync out of range) (II) NVIDIA(0): Not using default mode "1400x1050" (width too large for virtual size) (WW) NVIDIA(0): Not using mode "700x525" (height 1050 is larger than (WW) NVIDIA(0): EDID-specified maximum 1024) (**) NVIDIA(0): Validated modes for display device CRT-0: (**) NVIDIA(0): Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz (**) NVIDIA(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz (**) NVIDIA(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz (**) NVIDIA(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz (**) NVIDIA(0): Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz (**) NVIDIA(0): Default mode "640x512": 54.0 MHz, 64.0 kHz, 60.0 Hz (D) (**) NVIDIA(0): Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D) (**) NVIDIA(0): Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D) (**) NVIDIA(0): Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D) (**) NVIDIA(0): Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D) (II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024 (--) NVIDIA(0): Display dimensions: (320, 240) mm (--) NVIDIA(0): DPI set to (101, 108) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/X11R6/lib/modules/libfb.a (II) Module fb: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 ANSI C Emulation, version 0.2 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Loading /usr/X11R6/lib/modules/libramdac.a (II) Module ramdac: vendor="The XFree86 Project" compiled for 4.3.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.6 (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] 0 0 0xd8000000 - 0xd807ffff (0x80000) MX[B] [1] 0 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B] [2] 0 0 0xe4000000 - 0xe4ffffff (0x1000000) MX[B] [3] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [4] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [8] -1 0 0xe6001000 - 0xe60010ff (0x100) MX[B] [9] -1 0 0xe6000000 - 0xe6000fff (0x1000) MX[B] [10] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O [11] -1 0 0xd8000000 - 0xd807ffff (0x80000) MX[B](B) [12] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B) [13] -1 0 0xe4000000 - 0xe4ffffff (0x1000000) MX[B](B) [14] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD) [15] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) [16] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD) [17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [18] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [19] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B] [20] -1 0 0x0000e400 - 0x0000e403 (0x4) IX[B] [21] -1 0 0x0000e000 - 0x0000e003 (0x4) IX[B] [22] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B] [23] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B] [24] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[B] [25] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) [26] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) (II) NVIDIA(0): AGP 4X successfully initialized (II) NVIDIA(0): Setting mode "1280x1024" (II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture (==) NVIDIA(0): Backing store disabled (==) NVIDIA(0): Silken mouse enabled (II) Loading extension NV-GLX (II) Loading extension NV-CONTROL (==) RandR enabled (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension LBX (II) Initializing built-in extension XC-APPGROUP (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFree86-Bigfont (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) [GLX]: Initializing GLX extension (**) Option "Protocol" "Auto" (**) Mouse1: Protocol: "Auto" (**) Option "CorePointer" (**) Mouse1: Core Pointer (**) Option "Device" "/dev/mouse" (**) Mouse1: Emulate3Buttons, Emulate3Timeout: 50 (**) Option "ZAxisMapping" "4 5" (**) Mouse1: ZAxisMapping: buttons 4 and 5 (**) Mouse1: Buttons: 5 (II) Keyboard "Keyboard1" handled by legacy driver (II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE) (--) Mouse1: PnP-detected protocol: "ImPS/2" (II) Mouse1: ps2EnableDataReporting: succeeded And here is my XF86Config file: # File generated by xf86config. # # Copyright (c) 1999 by The XFree86 Project, Inc. # # Permission is hereby granted, free of charge, to any person obtaining a # copy of this software and associated documentation files (the "Software"), # to deal in the Software without restriction, including without limitation # the rights to use, copy, modify, merge, publish, distribute, sublicense, # and/or sell copies of the Software, and to permit persons to whom the # Software is furnished to do so, subject to the following conditions: # # The above copyright notice and this permission notice shall be included in # all copies or substantial portions of the Software. # # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL # THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE # SOFTWARE. # # Except as contained in this notice, the name of the XFree86 Project shall # not be used in advertising or otherwise to promote the sale, use or other # dealings in this Software without prior written authorization from the # XFree86 Project. # # ********************************************************************** # Refer to the XF86Config(4/5) man page for details about the format of # this file. # ********************************************************************** # ********************************************************************** # Module section -- this section is used to specify # which dynamically loadable modules to load. # ********************************************************************** # Section "Module" # This loads the DBE extension module. # Load "dbe" # Double buffer extension # This loads the miscellaneous extensions module, and disables # initialisation of the XFree86-DGA extension within that module. # SubSection "extmod" # Option "omit xfree86-dga" # don't initialise the DGA extension # EndSubSection # This loads the Type1 and FreeType font modules # Load "type1" # Load "speedo" # Load "freetype" # Load "xtt" # This loads the GLX module Load "glx" # This loads the DRI module # Load "dri" EndSection # ********************************************************************** # Files section. This allows default font and rgb paths to be set # ********************************************************************** Section "Files" # The location of the RGB database. Note, this is the name of the # file minus the extension (like ".txt" or ".db"). There is normally # no need to change the default. RgbPath "/usr/X11R6/lib/X11/rgb" # Multiple FontPath entries are allowed (which are concatenated together), # as well as specifying multiple comma-separated entries in one FontPath # command (or a combination of both methods) # # If you don't have a floating point coprocessor and emacs, Mosaic or other # programs take long to start up, try moving the Type1 and Speedo directory # to the end of this list (or comment them out). # FontPath "/usr/X11R6/lib/X11/fonts/local/" FontPath "/usr/X11R6/lib/X11/fonts/misc/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" FontPath "/usr/X11R6/lib/X11/fonts/Type1/" # FontPath "/usr/X11R6/lib/X11/fonts/TrueType/" # FontPath "/usr/X11R6/lib/X11/fonts/freefont/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" # The module search path. The default path is shown here. ModulePath "/usr/X11R6/lib/modules/" EndSection # ********************************************************************** # Server flags section. # ********************************************************************** Section "ServerFlags" # Uncomment this to cause a core dump at the spot where a signal is # received. This may leave the console in an unusable state, but may # provide a better stack trace in the core dump to aid in debugging # Option "NoTrapSignals" # Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence # (where n is 1 through 12). This allows clients to receive these key # events. # Option "DontVTSwitch" # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence # This allows clients to receive this key event. # Option "DontZap" # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching # sequences. This allows clients to receive these key events. # Option "Dont Zoom" # Uncomment this to disable tuning with the xvidtune client. With # it the client can still run and fetch card and monitor attributes, # but it will not be allowed to change them. If it tries it will # receive a protocol error. # Option "DisableVidModeExtension" # Uncomment this to enable the use of a non-local xvidtune client. # Option "AllowNonLocalXvidtune" # Uncomment this to disable dynamically modifying the input device # (mouse and keyboard) settings. # Option "DisableModInDev" # Uncomment this to enable the use of a non-local client to # change the keyboard or mouse settings (currently only xset). # Option "AllowNonLocalModInDev" EndSection # ********************************************************************** # Input devices # ********************************************************************** # ********************************************************************** # Core keyboard's InputDevice section # ********************************************************************** Section "InputDevice" Identifier "Keyboard1" Driver "Keyboard" # For most OSs the protocol can be omitted (it defaults to "Standard"). # When using XQUEUE (only for SVR3 and SVR4, but not Solaris), # uncomment the following line. # Option "Protocol" "Xqueue" # Option "AutoRepeat" "500 30" # Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) # Option "Xleds" "1 2 3" # Option "LeftAlt" "Meta" # Option "RightAlt" "ModeShift" # To customise the XKB settings to suit your keyboard, modify the # lines below (which are the defaults). For example, for a non-U.S. # keyboard, you will probably want to use: # Option "XkbModel" "pc101" # If you have a US Microsoft Natural keyboard, you can use: # Option "XkbModel" "microsoft" # # Then to change the language, change the Layout setting. # For example, a german layout can be obtained with: # Option "XkbLayout" "de" # or: # Option "XkbLayout" "de" # Option "XkbVariant" "nodeadkeys" # # If you'd like to switch the positions of your capslock and # control keys, use: # Option "XkbOptions" "ctrl:swapcaps" # These are the default XKB settings for XFree86 # Option "XkbRules" "xfree86" # Option "XkbModel" "pc101" # Option "XkbLayout" "us" # Option "XkbVariant" "" # Option "XkbOptions" "" # Option "XkbDisable" Option "XkbRules" "xfree86" Option "XkbModel" "pc101" Option "XkbLayout" "us" EndSection # ********************************************************************** # Core Pointer's InputDevice section # ********************************************************************** Section "InputDevice" # Identifier and driver Identifier "Mouse1" Driver "mouse" Option "Protocol" "Auto" Option "Device" "/dev/mouse" Option "ZAxisMapping" "4 5" # Mouse-speed setting for PS/2 mouse. # Option "Resolution" "256" # When using XQUEUE, comment out the above two lines, and uncomment # the following line. # Option "Protocol" "Xqueue" # Baudrate and SampleRate are only for some Logitech mice. In # almost every case these lines should be omitted. # Option "BaudRate" "9600" # Option "SampleRate" "150" # Emulate3Buttons is an option for 2-button Microsoft mice # Emulate3Timeout is the timeout in milliseconds (default is 50ms) # Option "Emulate3Buttons" # Option "Emulate3Timeout" "50" # ChordMiddle is an option for some 3-button Logitech mice # Option "ChordMiddle" EndSection # ********************************************************************** # Other input device sections # this is optional and is required only if you # are using extended input devices. This is for example only. Refer # to the XF86Config man page for a description of the options. # ********************************************************************** # # Section "InputDevice" # Identifier "Mouse2" # Driver "mouse" # Option "Protocol" "MouseMan" # Option "Device" "/dev/mouse2" # EndSection # # Section "InputDevice" # Identifier "spaceball" # Driver "magellan" # Option "Device" "/dev/cua0" # EndSection # # Section "InputDevice" # Identifier "spaceball2" # Driver "spaceorb" # Option "Device" "/dev/cua0" # EndSection # # Section "InputDevice" # Identifier "touchscreen0" # Driver "microtouch" # Option "Device" "/dev/ttyS0" # Option "MinX" "1412" # Option "MaxX" "15184" # Option "MinY" "15372" # Option "MaxY" "1230" # Option "ScreenNumber" "0" # Option "ReportingMode" "Scaled" # Option "ButtonNumber" "1" # Option "SendCoreEvents" # EndSection # # Section "InputDevice" # Identifier "touchscreen1" # Driver "elo2300" # Option "Device" "/dev/ttyS0" # Option "MinX" "231" # Option "MaxX" "3868" # Option "MinY" "3858" # Option "MaxY" "272" # Option "ScreenNumber" "0" # Option "ReportingMode" "Scaled" # Option "ButtonThreshold" "17" # Option "ButtonNumber" "1" # Option "SendCoreEvents" # EndSection # ********************************************************************** # Monitor section # ********************************************************************** # Any number of monitor sections may be present Section "Monitor" Identifier "rectron" # HorizSync is in kHz unless units are specified. # HorizSync may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. HorizSync 31.5 - 64.3 # HorizSync 30-64 # multisync # HorizSync 31.5, 35.2 # multiple fixed sync frequencies # HorizSync 15-25, 30-50 # multiple ranges of sync frequencies # VertRefresh is in Hz unless units are specified. # VertRefresh may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. VertRefresh 60 EndSection # ********************************************************************** # Graphics device section # ********************************************************************** # Any number of graphics device sections may be present # Standard VGA Device: # # Section "Device" # Identifier "Standard VGA" # VendorName "Unknown" # BoardName "Unknown" # The chipset line is optional in most cases. It can be used to override # the driver's chipset detection, and should not normally be specified. # Chipset "generic" # The Driver line must be present. When using run-time loadable driver # modules, this line instructs the server to load the specified driver # module. Even when not using loadable driver modules, this line # indicates which driver should interpret the information in this section. # Driver "vga" # The BusID line is used to specify which of possibly multiple devices # this section is intended for. When this line isn't present, a device # section can only match up with the primary video device. For PCI # devices a line like the following could be used. This line should not # normally be included unless there is more than one video device # intalled. # BusID "PCI:0:10:0" # VideoRam 256 # Clocks 25.2 28.3 # EndSection # Device configured by xf86config: Section "Device" Identifier "geforce4" Driver "nvidia" # VideoRam 65536 # Insert Clocks lines here if appropriate EndSection # ********************************************************************** # Screen sections # ********************************************************************** # Any number of screen sections may be present. Each describes # the configuration of a single screen. A single specific screen section # may be specified from the X server command line with the "-screen" # option. Section "Screen" Identifier "Screen1" Device "geforce4" Monitor "rectron" DefaultDepth 16 # Subsection "Display" # Depth 8 # Modes "1280x1024" "1024x768" "800x600" "640x480" # ViewPort 0 0 # EndSubsection Subsection "Display" Depth 16 Modes "1280x1024" "1024x768" "800x600" "640x480" ViewPort 0 0 EndSubsection # Subsection "Display" # Depth 24 # Modes "1280x1024" "1024x768" "800x600" "640x480" # ViewPort 0 0 # EndSubsection EndSection # ********************************************************************** # ServerLayout sections. # ********************************************************************** # Any number of ServerLayout sections may be present. Each describes # the way multiple screens are organised. A specific ServerLayout # section may be specified from the X server command line with the # "-layout" option. In the absence of this, the first section is used. # When now ServerLayout section is present, the first Screen section # is used alone. Section "ServerLayout" # The Identifier line must be present Identifier "Simple Layout" # Each Screen line specifies a Screen section name, and optionally # the relative position of other screens. The four names after # primary screen name are the screens to the top, bottom, left and right # of the primary screen. In this example, screen 2 is located to the # right of screen 1. Screen "Screen1" # Each InputDevice line specifies an InputDevice section name and # optionally some options to specify the way the device is to be # used. Those options include "CorePointer", "CoreKeyboard" and # "SendCoreEvents". InputDevice "Mouse1" "CorePointer" InputDevice "Keyboard1" "CoreKeyboard" EndSection # Section "DRI" # Mode 0666 # EndSection My hardware: Nvidia Geforce 4 MX440, 17" Digital monitor, I believe this keyboard is a us, 101 (I tried plugging in another keyboard, it did not help). I messed around with other problems, so far it is restricted to Mozilla, Mozilla-Firebird (whenever I type something) and Gnibbles (if the snake touches anything). Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.