Fred01 Posted May 18, 2009 Report Share Posted May 18, 2009 Since upgrading to 2009.1 seems to have lost connection to LPT #1 and attached printer. Using the new printer tool under 2009.1, ie. System-config-printer / see url http://wiki.mandriva.com/en/System-config-printer I'm also unable to 'find' my printer attached to the pc's local parallel port = LPT#1 In fact the System-config-printer tool not even displayed the LPT #1 as a choice , hence the tool when selecting to add a new printer does not come back with the choices as shown on the for mentioned link - the LPT #1 is not included as a choice. Seems as if after upgrading to 2009.1, connection to the LPT#1 is gone // same issue on another pc. The System-config-printer tool comes nicely back with a printer attached to an url port, when the printer is turned on and doesn't show this vary same printer when turned of before requesting the config tool to add a new printer. So it really looks as if the pc's have lost connection to the parallel port (LPT port) and thus no local printers attached to that port are being found as result. Any suggestions on how to check if the system (still) knows/has connection to the parallel port (LPT port) and / or how to (re)set this up (again) ?? Thanks in advance, Fred Quote Link to comment Share on other sites More sharing options...
Greg2 Posted May 18, 2009 Report Share Posted May 18, 2009 Please don't post the same problem more than once on the forum. This causes the information that may help you (and others) to be fragmented into several threads. :) Quote Link to comment Share on other sites More sharing options...
Fred01 Posted May 18, 2009 Author Report Share Posted May 18, 2009 Thanks -- correct / wasn't sure were the issue would belong to. BTW - as additional information; it concerns here a Mandriva supported printer (Canon-BJC-210) -- hooked up to the parallel port. Quote Link to comment Share on other sites More sharing options...
Greg2 Posted May 18, 2009 Report Share Posted May 18, 2009 I've found a fix in bug report #50139 - comment #4 cd /usr/lib/cups/backend chmod 700 parallel You could try that, and please add your info to that report. Let us know if it works for you. Quote Link to comment Share on other sites More sharing options...
ianw1974 Posted May 18, 2009 Report Share Posted May 18, 2009 You can try adding your user to the lp group - there probably is a gui way to do this, but I'm not sure what it is, but you can do it from a command line like this: su (enter root password when prompted) gpasswd -a user group replace user with your username and group with the groupname in this case lp, so my example for user ian, would be: gpasswd -a ian lp and see if you can communicate with the printer. Also, you can try setting it up with cups by opening a web browser, and then typing: http://localhost:631 if you connect and can login and add a printer, you're good to go. If not, maybe cups is missing. Quote Link to comment Share on other sites More sharing options...
David Batson Posted May 19, 2009 Report Share Posted May 19, 2009 See if the following thread is a help: http://forum.mandriva.com/viewtopic.php?t=110090 Quote Link to comment Share on other sites More sharing options...
Fred01 Posted May 19, 2009 Author Report Share Posted May 19, 2009 I've found a fix in bug report #50139 - comment #4cd /usr/lib/cups/backend chmod 700 parallel You could try that, and please add your info to that report. Let us know if it works for you. Thanks Greg, I've used the solution suggested and with success. cd /usr/lib/cups/backend chmod 700 parallel Checking on the remote pc starting the System-config-printer tool, learned that the LPT #1 port was back as a choice. Running the same solution on the pc where the printer was hooked up, even gave a more remarkable outcome -- not the LPT #1 was chown in he list of device choices, but the actual printer showed up as a valid choice. After accepting that settings, all worked well // test page printed ok, and also other print job , also from the remote pc are picked up successfully again. Quote Link to comment Share on other sites More sharing options...
Greg2 Posted May 19, 2009 Report Share Posted May 19, 2009 You're welcome. Would you please add your confirmation that this works to the bug report, so it will be fixed with an update for others? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.