darrell Posted May 9, 2009 Report Share Posted May 9, 2009 Since updating from Mandriva 2009.0 to 2009.1 I am experiencing USB problems. Seems that the software is unable to see the hardware. Originally I thought it was just my joysticks but digging further I see it also affects the Bluetooth dongle and the UPS power supply monitoring. In all cases, after booting, the different applications are not able to see the USB device. * the bluetooth icon doesn't pop up showing that the dongle is present and the bluetooth configurator reports that no device is present. Interestingly, if I unplug it and then plug it back in it shows up and works. This worked properly with 2009.0 * my APC Back-UPS ES cannot be found if I try to set up a UPS for monitoring. It worked properly with 2009.0 * neither my CH Products yoke or CH Products pedals can be found by X-plane. I then tried to set them up using jscalibrator and it can't find them either. These worked fine with 2009.0. * scanner seems to work fine with X-sane. So, it seems that the various applications can't see these hardware devices. However, it does look like they are getting detected. How can I go about debugging this further? Thanks a lot! [root @ beeker] lsusb Bus 008 Device 003: ID 03f0:0601 Hewlett-Packard ScanJet 6300c Bus 008 Device 002: ID 051d:0002 American Power Conversion Uninterruptible Power Supply Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 002: ID 046d:c016 Logitech, Inc. M-UV69a/HP M-UV96 Optical Wheel Mouse Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 003: ID 068e:00ff CH Products, Inc. Flight Sim Yoke Bus 004 Device 002: ID 1131:1001 Integrated System Solution Corp. KY-BT100 Bluetooth Adapter Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 068e:00f2 CH Products, Inc. Flight Sim Pedals Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub [root @ beeker] dmesg | grep -i usb usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 uhci_hcd: USB Universal Host Controller Interface driver ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.29.1-desktop-4mnb ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.29.1-desktop-4mnb uhci_hcd usb usb2: SerialNumber: 0000:00:1a.0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: EHCI Host Controller usb usb3: Manufacturer: Linux 2.6.29.1-desktop-4mnb ehci_hcd usb usb3: SerialNumber: 0000:00:1d.7 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.29.1-desktop-4mnb uhci_hcd usb usb4: SerialNumber: 0000:00:1a.1 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.29.1-desktop-4mnb uhci_hcd usb usb5: SerialNumber: 0000:00:1a.2 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: UHCI Host Controller usb usb6: Manufacturer: Linux 2.6.29.1-desktop-4mnb uhci_hcd usb usb6: SerialNumber: 0000:00:1d.0 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: UHCI Host Controller usb usb7: Manufacturer: Linux 2.6.29.1-desktop-4mnb uhci_hcd usb usb7: SerialNumber: 0000:00:1d.1 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb8: Product: UHCI Host Controller usb usb8: Manufacturer: Linux 2.6.29.1-desktop-4mnb uhci_hcd usb usb8: SerialNumber: 0000:00:1d.2 usb usb8: configuration #1 chosen from 1 choice hub 8-0:1.0: USB hub found usb 2-1: new low speed USB device using uhci_hcd and address 2 usb 2-1: New USB device found, idVendor=068e, idProduct=00f2 usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-1: Product: CH PRO PEDALS USB usb 2-1: Manufacturer: CH PRODUCTS usb 2-1: configuration #1 chosen from 1 choice usbcore: registered new interface driver hiddev input: CH PRODUCTS CH PRO PEDALS USB as /devices/pci0000:00/0000:00:1a.0/usb2/2-1/2-1:1.0/input/input4 generic-usb 0003:068E:00F2.0001: input,hidraw0: USB HID v1.00 Joystick [CH PRODUCTS CH PRO PEDALS USB ] on usb-0000:00:1a.0-1/input0 usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver usb 4-1: new full speed USB device using uhci_hcd and address 2 usb 4-1: New USB device found, idVendor=1131, idProduct=1001 usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 4-1: Product: ISSCEDRBTA usb 4-1: Manufacturer: ISSC usb 4-1: configuration #1 chosen from 1 choice usb 4-2: new low speed USB device using uhci_hcd and address 3 Bluetooth: Generic Bluetooth USB driver ver 0.4 usbcore: registered new interface driver btusb usb 4-2: New USB device found, idVendor=068e, idProduct=00ff usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 4-2: Product: CH FLIGHT SIM YOKE USB usb 4-2: Manufacturer: CH PRODUCTS usb 4-2: configuration #1 chosen from 1 choice input: CH PRODUCTS CH FLIGHT SIM YOKE USB as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input5 generic-usb 0003:068E:00FF.0002: input,hidraw1: USB HID v1.00 Joystick [CH PRODUCTS CH FLIGHT SIM YOKE USB ] on usb-0000:00:1a.1-2/input0 usb 5-1: new low speed USB device using uhci_hcd and address 2 usb 5-1: New USB device found, idVendor=046d, idProduct=c016 usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 5-1: Product: Optical USB Mouse usb 5-1: Manufacturer: Logitech usb 5-1: configuration #1 chosen from 1 choice input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input6 generic-usb 0003:046D:C016.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1a.2-1/input0 usb 8-1: new low speed USB device using uhci_hcd and address 2 usb 8-1: New USB device found, idVendor=051d, idProduct=0002 usb 8-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2 usb 8-1: Product: Back-UPS ES 750 FW:819.z3.D USB FW:z3 usb 8-1: Manufacturer: APC usb 8-1: SerialNumber: 5B0733T22894 usb 8-1: configuration #1 chosen from 1 choice generic-usb 0003:051D:0002.0004: hiddev0,hidraw3: USB HID v1.10 Device [APC Back-UPS ES 750 FW:819.z3.D USB FW:z3] on usb-0000:00:1d.2-1/input0 usb 8-2: new full speed USB device using uhci_hcd and address 3 usb 8-2: New USB device found, idVendor=03f0, idProduct=0601 usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 8-2: Product: HP ScanJet 6300C usb 8-2: Manufacturer: Hewlett-Packard usb 8-2: SerialNumber: SG01P271YRPE usb 8-2: configuration #1 chosen from 1 choice Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.