Jump to content

Static when playing sounds


jonny2gunz
 Share

Recommended Posts

I just installed Mandrive 2008 Spring on my system after I installed a new mobo (Biostar TForce TF8200 with integrated GeForce 8200) and the sound is working but terrible. It has a lot of interrmittent static. I've tried switching audio drivers around without much effect.

 

Can anybody offer me some help please? I've been a long time Mandrake/Mandriva user and this is just driving me nuts.

Link to comment
Share on other sites

$ lspci -vvv

00:00.0 RAM memory: nVidia Corporation Unknown device 0754 (rev a2)

Subsystem: Biostar Microtech Int'l Corp Unknown device 340b

Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step

ping- SERR- FastB2B- DisINTx-

Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-

<MAbort- >SERR- <PERR- INTx-

Latency: 0

Capabilities: <access denied>

 

00:01.0 ISA bridge: nVidia Corporation Unknown device 075c (rev a2)

Subsystem: Biostar Microtech Int'l Corp Unknown device 340b

Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Step

ping- SERR- FastB2B- DisINTx-

Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-

<MAbort- >SERR- <PERR- INTx-

Latency: 0

Region 0: I/O ports at 2f00

 

00:01.1 SMBus: nVidia Corporation Unknown device 0752 (rev a1)

Subsystem: Biostar Microtech Int'l Corp Unknown device 340b

Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Step

ping- SERR- FastB2B- DisINTx-

Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-

<MAbort- >SERR- <PERR- INTx-

Interrupt: pin A routed to IRQ 15

Region 0: I/O ports at 2900

Region 4: I/O ports at 2d00

Region 5: I/O ports at 2e00

Capabilities: <access denied>

 

00:01.2 RAM memory: nVidia Corporation Unknown device 0751 (rev a1)

Subsystem: Biostar Microtech Int'l Corp Unknown device 340b

Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Step

ping- SERR- FastB2B- DisINTx+

Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-

<MAbort- >SERR- <PERR- INTx-

 

00:01.3 Co-processor: nVidia Corporation Unknown device 0753 (rev a2)

Subsystem: Biostar Microtech Int'l Corp Unknown device 340b

Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step

ping- SERR- FastB2B- DisINTx-

Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-

<MAbort- >SERR- <PERR- INTx-

Latency: 0 (750ns min, 250ns max)

Interrupt: pin B routed to IRQ 10

Region 0: Memory at fcf80000 (32-bit, non-prefetchable)

 

00:01.4 RAM memory: nVidia Corporation Unknown device 0568 (rev a1)

Subsystem: Biostar Microtech Int'l Corp Unknown device 340b

Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Step

ping- SERR- FastB2B- DisINTx+

Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-

<MAbort- >SERR- <PERR- INTx-

 

00:02.0 USB Controller: nVidia Corporation Unknown device 077b (rev a1) (prog-if

10 [OHCI])

Subsystem: Biostar Microtech Int'l Corp Unknown device 340b

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step

ping- SERR- FastB2B- DisINTx-

Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-

<MAbort- >SERR- <PERR- INTx-

Latency: 0 (750ns min, 250ns max)

Interrupt: pin A routed to IRQ 22

Region 0: Memory at fcf7f000 (32-bit, non-prefetchable)

Capabilities: <access denied>

Kernel driver in use: ohci_hcd

Kernel modules: ohci-hcd

 

00:02.1 USB Controller: nVidia Corporation Unknown device 077c (rev a1) (prog-if

20 [EHCI])

Subsystem: Biostar Microtech Int'l Corp Unknown device 340b

Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step

ping- SERR- FastB2B- DisINTx-

Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-

<MAbort- >SERR- <PERR- INTx-

Latency: 0 (750ns min, 250ns max)

Interrupt: pin B routed to IRQ 20

Region 0: Memory at fcf7ec00 (32-bit, non-prefetchable)

Capabilities: <access denied>

Kernel driver in use: ehci_hcd

Kernel modules: ehci-hcd

 

00:04.0 USB Controller: nVidia Corporation Unknown device 077d (rev a1) (prog-if

10 [OHCI])

Subsystem: Biostar Microtech Int'l Corp Unknown device 340b

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step

ping- SERR- FastB2B- DisINTx-

Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-

<MAbort- >SERR- <PERR- INTx-

Latency: 0 (750ns min, 250ns max)

Interrupt: pin A routed to IRQ 23

Region 0: Memory at fcf7d000 (32-bit, non-prefetchable)

Capabilities: <access denied>

Kernel driver in use: ohci_hcd

Kernel modules: ohci-hcd

 

00:04.1 USB Controller: nVidia Corporation Unknown device 077e (rev a1) (prog-if

20 [EHCI])

Subsystem: Biostar Microtech Int'l Corp Unknown device 340b

Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step

ping- SERR- FastB2B- DisINTx-

Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-

<MAbort- >SERR- <PERR- INTx-

Latency: 0 (750ns min, 250ns max)

Interrupt: pin B routed to IRQ 21

Region 0: Memory at fcf7e800 (32-bit, non-prefetchable)

Capabilities: <access denied>

Kernel driver in use: ehci_hcd

Kernel modules: ehci-hcd

 

00:06.0 IDE interface: nVidia Corporation Unknown device 0759 (rev a1) (prog-if

8a [Master SecP PriP])

Subsystem: Biostar Microtech Int'l Corp Unknown device 340b

Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step

ping- SERR- FastB2B- DisINTx-

Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-

<MAbort- >SERR- <PERR- INTx-

Latency: 0 (750ns min, 250ns max)

Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disab

led]

Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disab

led]

Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disab

led]

Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disab

led]

Region 4: I/O ports at ffa0

Capabilities: <access denied>

Kernel driver in use: AMD_IDE

Kernel modules: pata_amd, amd74xx

 

00:07.0 Audio device: nVidia Corporation Unknown device 0774 (rev a1)

Subsystem: Biostar Microtech Int'l Corp Unknown device 8213

Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step

ping- SERR- FastB2B- DisINTx-

Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-

<MAbort- >SERR- <PERR- INTx-

Latency: 0 (500ns min, 1250ns max)

Interrupt: pin A routed to IRQ 21

Region 0: Memory at fcf78000 (32-bit, non-prefetchable)

Capabilities: <access denied>

Kernel driver in use: HDA Intel

Kernel modules: snd-hda-intel

 

00:08.0 PCI bridge: nVidia Corporation Unknown device 075a (rev a1) (prog-if 01

[subtractive decode])

Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step

ping- SERR- FastB2B- DisINTx-

Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-

<MAbort- >SERR- <PERR- INTx-

Latency: 0

Bus: primary=00, secondary=01, subordinate=01, sec-latency=32

I/O behind bridge: 0000f000-00000fff

Memory behind bridge: fff00000-000fffff

Prefetchable memory behind bridge: dff00000-dfffffff

Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort

- <MAbort+ <SERR- <PERR-

BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-

PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-

Capabilities: <access denied>

 

00:09.0 IDE interface: nVidia Corporation Unknown device 0ad0 (rev a2) (prog-if

85 [Master SecO PriO])

Subsystem: Biostar Microtech Int'l Corp Unknown device 5409

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step

ping- SERR+ FastB2B- DisINTx-

Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-

<MAbort- >SERR- <PERR- INTx-

Latency: 0 (750ns min, 250ns max)

Interrupt: pin A routed to IRQ 20

Region 0: I/O ports at c480

Region 1: I/O ports at c400

Region 2: I/O ports at c080

Region 3: I/O ports at c000

Region 4: I/O ports at bc00

Region 5: Memory at fcf76000 (32-bit, non-prefetchable)

Capabilities: <access denied>

Kernel driver in use: ahci

Kernel modules: ahci

 

00:0b.0 PCI bridge: nVidia Corporation Unknown device 0569 (rev a1) (prog-if 00

[Normal decode])

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step

ping- SERR- FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-

<MAbort- >SERR- <PERR- INTx-

Latency: 0, Cache Line Size: 64 bytes

Bus: primary=00, secondary=02, subordinate=02, sec-latency=0

I/O behind bridge: 0000d000-0000dfff

Memory behind bridge: fd000000-feafffff

Prefetchable memory behind bridge: 00000000f0000000-00000000f9ffffff

Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-

<MAbort- <SERR- <PERR-

BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-

PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

Capabilities: <access denied>

Kernel modules: shpchp

 

00:10.0 PCI bridge: nVidia Corporation Unknown device 0778 (rev a1) (prog-if 00

[Normal decode])

Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step

ping- SERR- FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-

<MAbort- >SERR- <PERR- INTx-

Latency: 0, Cache Line Size: 64 bytes

Bus: primary=00, secondary=03, subordinate=03, sec-latency=0

I/O behind bridge: 0000f000-00000fff

Memory behind bridge: fff00000-000fffff

Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff

Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-

<MAbort- <SERR- <PERR-

BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-

PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

Capabilities: <access denied>

Kernel driver in use: pcieport-driver

Kernel modules: shpchp

 

00:12.0 PCI bridge: nVidia Corporation Unknown device 075b (rev a1) (prog-if 00

[Normal decode])

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step

ping- SERR- FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-

<MAbort- >SERR- <PERR- INTx-

Latency: 0, Cache Line Size: 64 bytes

Bus: primary=00, secondary=04, subordinate=04, sec-latency=0

I/O behind bridge: 0000e000-0000efff

Memory behind bridge: feb00000-febfffff

Prefetchable memory behind bridge: 00000000fbf00000-00000000fbffffff

Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-

<MAbort- <SERR- <PERR-

BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-

PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

Capabilities: <access denied>

Kernel driver in use: pcieport-driver

Kernel modules: shpchp

 

00:13.0 PCI bridge: nVidia Corporation Unknown device 077a (rev a1) (prog-if 00

[Normal decode])

Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step

ping- SERR- FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-

<MAbort- >SERR- <PERR- INTx-

Latency: 0, Cache Line Size: 64 bytes

Bus: primary=00, secondary=05, subordinate=05, sec-latency=0

I/O behind bridge: 0000f000-00000fff

Memory behind bridge: fff00000-000fffff

Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff

Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-

<MAbort- <SERR- <PERR-

BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-

PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

Capabilities: <access denied>

Kernel driver in use: pcieport-driver

Kernel modules: shpchp

 

00:14.0 PCI bridge: nVidia Corporation Unknown device 077a (rev a1) (prog-if 00

[Normal decode])

Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step

ping- SERR- FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-

<MAbort- >SERR- <PERR- INTx-

Latency: 0, Cache Line Size: 64 bytes

Bus: primary=00, secondary=06, subordinate=06, sec-latency=0

I/O behind bridge: 0000f000-00000fff

Memory behind bridge: fff00000-000fffff

Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff

Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-

<MAbort- <SERR- <PERR-

BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-

PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

Capabilities: <access denied>

Kernel driver in use: pcieport-driver

Kernel modules: shpchp

 

00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTra

nsport Technology Configuration

Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Step

ping- SERR- FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-

<MAbort- >SERR- <PERR- INTx-

Capabilities: <access denied>

 

00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address

Map

Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Step

ping- SERR- FastB2B- DisINTx-

Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-

<MAbort- >SERR- <PERR- INTx-

 

00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Con

troller

Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Step

ping- SERR- FastB2B- DisINTx-

Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-

<MAbort- >SERR- <PERR- INTx-

 

00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscella

neous Control

Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Step

ping- SERR- FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-

<MAbort- >SERR- <PERR- INTx-

Capabilities: <access denied>

Kernel driver in use: k8temp

Kernel modules: k8temp

 

01:08.0 Network controller: Intersil Corporation Prism 2.5 Wavelan chipset (rev

01)

Subsystem: Netgear MA311 802.11b wireless adapter

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Step

ping- SERR+ FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort

- <MAbort- >SERR- <PERR- INTx-

Latency: 32, Cache Line Size: 64 bytes

Interrupt: pin A routed to IRQ 16

Region 0: Memory at dffff000 (32-bit, prefetchable)

Capabilities: <access denied>

Kernel driver in use: hostap_pci

Kernel modules: orinoco_pci, hostap_pci

 

02:00.0 VGA compatible controller: nVidia Corporation Unknown device 0849 (rev a

2) (prog-if 00 [VGA controller])

Subsystem: Biostar Microtech Int'l Corp Unknown device 1408

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step

ping- SERR+ FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-

<MAbort- >SERR- <PERR- INTx-

Latency: 0

Interrupt: pin A routed to IRQ 22

Region 0: Memory at fd000000 (32-bit, non-prefetchable)

Region 1: Memory at f0000000 (64-bit, prefetchable)

Region 3: Memory at f8000000 (64-bit, prefetchable)

Region 5: I/O ports at dc00

[virtual] Expansion ROM at feae0000 [disabled]

Capabilities: <access denied>

Kernel driver in use: nvidia

Kernel modules: nvidia-current, nvidiafb

 

04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI E xpress Gigabit Ethernet controller (rev 02)

Subsystem: Biostar Microtech Int'l Corp Unknown device 2307

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step ping- SERR+ FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 0, Cache Line Size: 64 bytes

Interrupt: pin A routed to IRQ 17

Region 0: I/O ports at e800

Region 2: Memory at febff000 (64-bit, non-prefetchable)

Region 4: Memory at fbff0000 (64-bit, prefetchable)

Expansion ROM at febc0000 [disabled]

Capabilities: <access denied>

Kernel driver in use: r8169

Kernel modules: r8169

Link to comment
Share on other sites

now the bad news you will have to try all the following models below

 

in the file /etc/modprobe.conf you will find a line like this:

 

options snd-hda-intel model=auto

 

substitute auto with the following models and see if it works for you, you will have to reboot each time

 

(or close all audio apps then

 

rmmod snd-hda-intel

 

change the model in modprobe.conf and

 

modprobe (ie enter the command modprobe in a console))

 

 

 

 

 

857 ALC883/888

858 3stack-dig 3-jack with SPDIF I/O

859 6stack-dig 6-jack digital with SPDIF I/O

860 3stack-6ch 3-jack 6-channel

861 3stack-6ch-dig 3-jack 6-channel with SPDIF I/O

862 6stack-dig-demo 6-jack digital for Intel demo board

863 acer Acer laptops (Travelmate 3012WTMi, Aspire 5600, etc)

864 acer-aspire Acer Aspire 9810

865 medion Medion Laptops

866 medion-md2 Medion MD2

867 targa-dig Targa/MSI

868 targa-2ch-dig Targs/MSI with 2-channel

869 laptop-eapd 3-jack with SPDIF I/O and EAPD (Clevo M540JE, M550JE)

870 lenovo-101e Lenovo 101E

871 lenovo-nb0763 Lenovo NB0763

872 lenovo-ms7195-dig Lenovo MS7195

873 haier-w66 Haier W66

874 6stack-hp HP machines with 6stack (Nettle boards)

875 3stack-hp HP machines with 3stack (Lucknow, Samba boards)

876 6stack-dell Dell machines with 6stack (Inspiron 530)

877 mitac Mitac 8252D

878 auto auto-config reading BIOS (default)

 

 

from: http://www.mjmwired.net/kernel/Documentati...nfiguration.txt (the first column is line number, ignore it, second model number, the one you have to try, third column description.....look at the link if it's not clear)

Edited by ffi
Link to comment
Share on other sites

My modprobe.conf file looks different. I don't know if it's messed up from all of the driver changes I was trying, here it is:

 

install scsi_hostadapter /sbin/modprobe ahci; /sbin/modprobe ata_piix; /bin/true

install ide-controller /sbin/modprobe amd74xx; /sbin/modprobe ide_generic; /bin/true

install usb-interface /sbin/modprobe ehci_hcd; /sbin/modprobe ohci_hcd; /bin/true

alias wlan0 hostap_pci

alias eth0 r8169

alias sound-slot-0 nvaudio

alias pci:v00001260d00003873sv00001385sd00004105bc02sc80i00 hostap_pci

remove snd_hda_intel /sbin/modprobe --first-time -r --ignore-remove snd_hda_intel

install snd_hda_intel /sbin/modprobe --first-time --ignore-install snd_hda_intel

remove nvaudio /sbin/modprobe --first-time -r --ignore-remove nvaudio

install nvaudio /sbin/modprobe --first-time --ignore-install nvaudio

remove snd_intel8x0 /sbin/modprobe --first-time -r --ignore-remove snd_intel8x0

install snd_intel8x0 /sbin/modprobe --first-time --ignore-install snd_intel8x0

remove ali5455 /sbin/modprobe --first-time -r --ignore-remove ali5455

install ali5455 /sbin/modprobe --first-time --ignore-install ali5455

remove audio /sbin/modprobe --first-time -r --ignore-remove audio

install audio /sbin/modprobe --first-time --ignore-install audio

remove snd_usb_audio /sbin/modprobe --first-time -r --ignore-remove snd_usb_audio

install snd_usb_audio /sbin/modprobe --first-time --ignore-install snd_usb_audio

remove via82cxxx_audio /sbin/modprobe --first-time -r --ignore-remove via82cxxx_audio

install via82cxxx_audio /sbin/modprobe --first-time --ignore-install via82cxxx_audio

Link to comment
Share on other sites

My modprobe.conf file looks different. I don't know if it's messed up from all of the driver changes I was trying, here it is:

 

then just add the line at the bottom

 

 

like so:

 

options snd-hda-intel model=3stack-dig

 

 

 

one more tip in kde arts uses the audio device and make it impossible to rmmod the sound module, so disable it... 

 

(@lex, even 20 reboots is faster than downloading anything from the realtek servers....)

Edited by ffi
Link to comment
Share on other sites

I gave up and just pulled a separate sound blaster card out of an old machine and disabled my on board sound. I also pull an old separate geforce 6200 card and am using that in place of my on board 8200 because the 8200 generates a bunch of nasty artifacts when using compiz-fusion.

 

So much for the little upgrades I was hoping to get with this new mobo.

 

I really appreciate the help, thanks again.

Link to comment
Share on other sites

I think it sounds more like a defective Board regardless of it being new.

I would suggest returning it if possible and replacing it.

On board audio chips are cheap, that is why they are used.

I say that even though I use it myself. :D

 

Cheers. John.

Link to comment
Share on other sites

then just add the line at the bottom

 

(@lex, even 20 reboots is faster than downloading anything from the realtek servers....)

 

@ffi

 

 wget ftp://202.65.194.212/pc/audio/LinuxPkg_5.07.tar.bz2
--2008-08-17 09:02:44--  ftp://202.65.194.212/pc/audio/LinuxPkg_5.07.tar.bz2
	   => `LinuxPkg_5.07.tar.bz2'
ÅÄ…czenie siÄ™ z 202.65.194.212:21... poÅ‚Ä…czono.
Logowanie siÄ™ jako anonymous ... Zalogowano siÄ™!
==> SYST ... zrobiono.	==> PWD ... zrobiono.
==> TYPE I ... zrobiono.  ==> CWD /pc/audio ... zrobiono.
==> SIZE LinuxPkg_5.07.tar.bz2 ... 4954880
==> PASV ... zrobiono.	==> RETR LinuxPkg_5.07.tar.bz2 ... zrobiono.
Długość: 4954880 (4.7M)

100%[============================================================================
===========>] 4,954,880   57.6K/s   w  1m 55s

2008-08-17 09:04:47 (42.2 KB/s) - zapisano `LinuxPkg_5.07.tar.bz2' [4954880]

 

Good luck ....lex

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...