Ixthusdan Posted June 9, 2003 Report Share Posted June 9, 2003 I have a board with on-board sound (AC97) and I am using a SB Live. You should not be using the ac97 codec; the fact that you are means that you do not have it turned off. So, go into your bios and make sure that you have it all off. In my bios for an Epox 8k9a, I have two seperate areas that I must go to in order to remove onboard ac97 chip. After you verify that it is completely off, then reconfigure your sound card in MCC, as suggested. Mandrake only makes the mods that it will detect. It is detecting your on board sound. Quote Link to comment Share on other sites More sharing options...
Guest Graeme43 Posted June 9, 2003 Report Share Posted June 9, 2003 ok, ill give it a try i thought i disabled it :shock: Edit: it IS disabled so it says, and its AC 97 :shock: Quote Link to comment Share on other sites More sharing options...
Ixthusdan Posted June 9, 2003 Report Share Posted June 9, 2003 Mandrake is detecting the chip, because it is loading the module. My machine doesn't even try to load the module; mandrake doesn't know it's there. Check for "game ports" and "sb emulation" in the bios and make sure it is all disabled. What kind of mb is it? Quote Link to comment Share on other sites More sharing options...
Guest Graeme43 Posted June 9, 2003 Report Share Posted June 9, 2003 how do i find out the mb? :shock: and how do i stop it loading the module? Quote Link to comment Share on other sites More sharing options...
Ixthusdan Posted June 9, 2003 Report Share Posted June 9, 2003 Sorry. What kind of motherboard do you have, or what brand of computer do you have? Quote Link to comment Share on other sites More sharing options...
Guest Graeme43 Posted June 10, 2003 Report Share Posted June 10, 2003 Says 7CTKJD on my manual and its made by Chanintech :?: Quote Link to comment Share on other sites More sharing options...
Ixthusdan Posted June 10, 2003 Report Share Posted June 10, 2003 I'll check out your bios screens and post back later. (I'm at work this time of day!!) Quote Link to comment Share on other sites More sharing options...
Guest Graeme43 Posted June 10, 2003 Report Share Posted June 10, 2003 now no linux will install, mandrake locks up at summary screen ( mouse moves, does not progress, and window where config would be is just grey ( no writing ) and redhat gets error copying install image :shock: :x Quote Link to comment Share on other sites More sharing options...
tyme Posted June 10, 2003 Report Share Posted June 10, 2003 why were you trying to install again? you should have left one install on so that we could help you through your issues. re-installing wouldn't fix it. I assume you now have a non-working system? Quote Link to comment Share on other sites More sharing options...
Guest Graeme43 Posted June 10, 2003 Report Share Posted June 10, 2003 the reinstall was to try the expert setup :? And im dual boot so i have a windows 2003 ( :roll: ) Quote Link to comment Share on other sites More sharing options...
tyme Posted June 10, 2003 Report Share Posted June 10, 2003 the reinstall was to try the expert setup :? oh...ok. have you tried the non-expert install with Mandrake again? does it still freeze at the same point? Quote Link to comment Share on other sites More sharing options...
Ixthusdan Posted June 10, 2003 Report Share Posted June 10, 2003 I think tyme is right. You should not do expert. Just a standard install to get a functioning system, so that we can troubleshoot it. When I first moved from windex to linux, I was also used to the reinstall-in-order-to-fix-it routine. Linux is not like that, but you do need a functioning system to a command line in order to accomplish troubleshooting!! :wink: Quote Link to comment Share on other sites More sharing options...
Guest Graeme43 Posted June 10, 2003 Report Share Posted June 10, 2003 all mandrakes freeze at the same time, i got it running again with rescue but forgot what i did, :x Quote Link to comment Share on other sites More sharing options...
static Posted June 10, 2003 Report Share Posted June 10, 2003 It would not be the expert install that would freeze, it's gotta be something now different in the bios. (And if I'm right, I feel he should then go on with the expert install once this weirdness is resolved - to allow for configuring the sound and removing any unwanted on-board sound). =============================================== OK - what did you change in the bios? Quote Link to comment Share on other sites More sharing options...
Guest Graeme43 Posted June 10, 2003 Report Share Posted June 10, 2003 all i need to do is remove the onboard sound, i had the jumper taken out as well before i even started with linux :shock: I didnt change anything in the bios :| only the onboard sound ( AC97 ) is set at disabled, but with it "disabled" it still installed Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.