Wine Prob

mystified · May 30, 2003

I'm trying to install a program called CASMATE using wine. I can get the install started, it asked for my HASP key and then quits on me. I realize I may not be successful with this but I'd really like to give it a try. It's old software that was written for Win 3.1 and I'm running it under ME and it's not very happy about it! :lol:

This are the error messages I'm receiving:

mystified@cs679105-98 CASWIN]$ wine SETUP.EXE

Warning: L"/usr/bin/wine.bin" not accessible from a configured DOS drive

err:font:ReadFontDir Can't open directory "/home/mystified/.wine/fake_windows/Windows/Fonts"

Warning: L"/usr/bin/wine.bin" not accessible from a configured DOS drive

FIXME:pthread_cond_init

err:win32:PE_fixup_imports No implementation for SHELL32.DLL.712 imported from C:WindowsSystemcomdlg32.dll, setting to 0xdeadbeef

err:font:ReadFontDir Can't open directory "/home/mystified/.wine/fake_windows/Windows/Fonts"

file_set_error: No such file or directory

fixme:ntdll:RtlNtStatusToDosError no mapping for 0001869f

FIXME:pthread_cond_init

[mystified@cs679105-98 CASWIN]$ err:win32:PE_fixup_imports No implementation for SHELL32.DLL.712 imported from C:WindowsSystemcomdlg32.dll, setting to 0xdeadbeef

err:font:ReadFontDir Can't open directory "/home/mystified/.wine/fake_windows/Windows/Fonts"

file_set_error: No such file or directory

fixme:ntdll:RtlNtStatusToDosError no mapping for 0001869f

file_set_error: No such file or directory

fixme:ntdll:RtlNtStatusToDosError no mapping for 0001869f

I've done numerous google searches, even searched MUOld and haven't come up with anything like it.

This is my wine.config file -

WINE REGISTRY Version 2

;; All keys relative to MachineSoftwareWineWineConfig

;; If you think it is necessary to show others your complete config for

;; a

;; bug report, filter out empty lines and comments with

;; grep -v "^;" ~/.wine/config | grep '.'

;;

;; MS-DOS drives configuration

;;

;; Each section has the following format:

;; [Drive X]

;; "Path"="xxx" (Unix path for drive root)

;; "Type"="xxx" (supported types are 'floppy', 'hd', 'cdrom' and

;; 'network')

;; "Label"="xxx" (drive label, at most 11 characters)

;; "Serial"="xxx" (serial number, 8 characters hexadecimal number)

;; "Filesystem"="xxx" (supported types are 'msdos'/'dos'/'fat',

;; 'win95'/'vfat', 'unix')

;; This is the FS Wine is supposed to emulate on a certain

;; directory structure.

;; Recommended:

;; - "win95" for ext2fs, VFAT and FAT32

;; - "msdos" for FAT16 (ugly, upgrading to VFAT driver strongly

;; recommended)

;; DON'T use "unix" unless you intend to port programs using Winelib !

;; "Device"="/dev/xx" (only if you want to allow raw device access)

;;

[Drive A]

"Path" = "/mnt/floppy"

"Type" = "floppy"

"Label" = "Floppy"

"Filesystem" = "win95"

"Device" = "/dev/fd0"

[Drive C]

"Path" = "${HOME}/.wine/fake_windows"

"Type" = "hd"

"Label" = "MS-DOS"

"Filesystem" = "win95"

;[Drive D]

;"Path" = "/mnt/cdrom"

;"Type" = "cdrom"

;"Label" = "CD-Rom"

;"Filesystem" = "win95"

; make sure that device is correct and has proper permissions !

;"Device" = "/dev/cdrw"

[Drive E]

"Path" = "/tmp"

"Type" = "hd"

"Label" = "Tmp Drive"

"Filesystem" = "win95"

[Drive F]

"Path" = "${HOME}"

"Type" = "network"

"Label" = "Home"

"Filesystem" = "win95"

[wine]

"Windows" = "c:windows"

"System" = "c:windowssystem"

"Temp" = "e:"

"Path" = "c:windows;c:windowssystem;e:;e:test;f:"

"Profile" = "c:windowsProfilesAdministrator"

"GraphicsDriver" = "x11drv"

;"ShowDirSymlinks" = "1"

;"ShowDotFiles" = "1"

"ShellLinker" = "wineshelllink"

# <wineconf>

[Version]

; Windows version to imitate

; (win95,win98,winme,nt351,nt40,win2k,winxp,win20,win30,win31)" },

"Windows" = "win98"

; DOS version to imitate

;"DOS" = "6.22"

; Be careful here, wrong DllOverrides settings have the potential

; to pretty much kill your setup.

[DllOverrides]

; some dlls you may want to change

"oleaut32" = "builtin, native"

"ole32" = "builtin, native"

"commdlg" = "builtin, native"

"comdlg32" = "builtin, native"

"shell" = "builtin, native"

"shell32" = "builtin, native"

"shfolder" = "builtin, native"

"shlwapi" = "builtin, native"

"shdocvw" = "builtin, native"

"advapi32" = "builtin, native"

"msvcrt" = "native, builtin"

"mciavi.drv" = "native, builtin"

"mcianim.drv" = "native, builtin"

"commctrl" = "native"

"comctl32" = "native"

"comdlg32" = "native, builtin"

"msvcrt" = "native"

"shdoclc" = "native"

"shdocvw" = "native"

"shlwapi" = "native"

"urlmon" = "native"

"wininet" = "native"

"rasapi32" = "native"

"ntdll.dll" = "native, builtin"

; you can specify applications too

; default for all other dlls

"*" = "builtin, native"

[x11drv]

; Number of colors to allocate from the system palette

"AllocSystemColors" = "100"

; Use a private color map

"PrivateColorMap" = "N"

; Favor correctness over speed in some graphics operations

"PerfectGraphics" = "N"

; Color depth to use on multi-depth screens

;;"ScreenDepth" = "16"

; Name of X11 display to use

;;"Display" = ":0.0"

; Allow the window manager to manage created windows

"Managed" = "Y"

; Use a desktop window of 640x480 for Wine

;"Desktop" = "1024x768"

; Use XFree86 DGA extension if present

; (make sure /dev/mem is accessible by you !)

"UseDGA" = "Y"

; Use XShm extension if present

"UseXShm" = "Y"

; Use XVidMode extension if present

"UseXVidMode" = "Y"

; Use the take focus protocol

"UseTakeFocus" = "Y"

; Enable DirectX mouse grab

"DXGrab" = "N"

; Create the desktop window with a double-buffered visual

; (useful to play OpenGL games)

"DesktopDoubleBuffered" = "N"

; Code page used for captions in managed mode

; 0 means default ANSI code page (CP_ACP == 0)

"TextCP" = "0"

; Use this if you have more than one port for video on your setup

; (Wine uses for now the first 'input image' it finds).

;; "XVideoPort" = "43"

; Run in synchronous mode (useful for debugging X11 problems)

;;"Synchronous" = "Y"

[fonts]

;Read the Fonts topic in the Wine User Guide before adding aliases

;See a couple of examples for russian users below

"Resolution" = "96"

"Default" = "-adobe-helvetica-"

"DefaultFixed" = "fixed"

"DefaultSerif" = "-adobe-times-"

"DefaultSansSerif" = "-adobe-helvetica-"

;; default TrueType fonts with russian koi8-r encoding

;"Default" = "-monotype-arial-*-*-*--*-*-*-*-*-*-koi8-r"

;"DefaultFixed" = "-monotype-courier new-*-*-*--*-*-*-*-*-*-koi8-r"

;"DefaultSerif" = "-monotype-times new roman-*-*-*--*-*-*-*-*-*-koi8-r"

;"DefaultSansSerif" = "-monotype-arial-*-*-*--*-*-*-*-*-*-koi8-r"

;; default cyrillic bitmap X fonts

;"Default" = "-cronyx-helvetica-"

;"DefaultFixed" = "fixed"

;"DefaultSerif" = "-cronyx-times-"

;"DefaultSansSerif" = "-cronyx-helvetica-"

; the TrueType font dirs you want to make accessible to wine

[FontDirs]

;"dir1" = "/usr/X11R6/lib/X11/fonts/TrueType"

;"dir2" = "/usr/share/fonts/truetype"

;"dir3" = "/usr/X11R6/lib/X11/fonts/TT"

;"dir4" = "/usr/share/fonts/TT"

[serialports]

"Com1" = "/dev/ttyS0"

"Com2" = "/dev/ttyS1"

"Com3" = "/dev/ttyS2"

"Com4" = "/dev/modem"

[parallelports]

"Lpt1" = "/dev/lp0"

[ppdev]

;; key: io-base of the emulated port

;; value : parport-device{,timeout}

;; timeout for auto closing an open device ( not yet implemented)

;"378" = "/dev/parport0"

;"278" = "/dev/parport1"

;"3bc" = "/dev/parport2"

[spooler]

"FILE:" = "tmp.ps"

"LPT1:" = "|lpr"

"LPT2:" = "|gs -sDEVICE=bj200 -sOutputFile=/tmp/fred -q -"

"LPT3:" = "/dev/lp3"

[ports]

;"read" = "0x779,0x379,0x280-0x2a0"

;"write" = "0x779,0x379,0x280-0x2a0"

[Debug]

;"RelayExclude" = "RtlEnterCriticalSection;RtlLeaveCriticalSection"

;"RelayInclude" = "user32.CreateWindowA"

;"SnoopExclude" = "RtlEnterCriticalSection;RtlLeaveCriticalSection"

;"SpyExclude" = "WM_SIZE;WM_TIMER;"

[registry]

;These are all booleans. Y/y/T/t/1 are true, N/n/F/f/0 are false.

;Defaults are read all, write to Home

; Where to find the global registries

;"GlobalRegistryDir" = "/etc";

; Global registries (stored in /etc)

"LoadGlobalRegistryFiles" = "Y"

; Home registries (stored in ~user/.wine/)

"LoadHomeRegistryFiles" = "Y"

; Load Windows registries from the Windows directory

"LoadWindowsRegistryFiles" = "Y"

; TRY to write all changes to home registries

"WritetoHomeRegistryFiles" = "Y"

; Registry periodic save timeout in seconds

; "PeriodicSave" = "600"

; Save only modified keys

"SaveOnlyUpdatedKeys" = "Y"

[Tweak.Layout]

;; supported styles are 'Win31'(default), 'Win95', 'Win98'

;; this has *nothing* to do with the windows version Wine returns:

;; set the "Windows" value in the [Version] section if you want that.

"WineLook" = "Win95"

[Console]

;"Drivers" = "tty"

;"XtermProg" = "nxterm"

;"InitialRows" = "25"

;"InitialColumns" = "80"

;"TerminalType" = "nxterm"

[Clipboard]

"ClearAllSelections" = "0"

"PersistentSelection" = "1"

; List of all directories directly contain .AFM files

[afmdirs]

"1" = "/usr/share/ghostscript/fonts"

"2" = "/usr/share/a2ps/afm"

"3" = "/usr/share/enscript"

"4" = "/usr/X11R6/lib/X11/fonts/Type1"

[WinMM]

"Drivers" = "wineoss.drv"

#"Drivers" = "winearts.drv"

"WaveMapper" = "msacm.drv"

"MidiMapper" = "midimap.drv"

[dsound]

;; HEL only: Number of waveOut fragments ahead to mix in new buffers.

;"HELmargin" = "5"

;; HEL only: Number of waveOut fragments ahead to queue to driver.

;"HELqueue" = "5"

;; Max number of fragments to prebuffer

;"SndQueueMax" = "28"

;; Min number of fragments to prebuffer

;"SndQueueMin" = "12"

;; sample AppDefaults entries

;[AppDefaultsiexplore.exeDllOverrides]

;"shlwapi" = "native"

;"rpcrt4" = "native"

;"ole32" = "native"

;"shdocvw" = "native"

;"wininet" = "native"

;"shfolder" = "native"

;"shell32" = "native"

;"shell" = "native"

;"comctl32" = "native"

;

;[AppDefaultssetup.exex11drv]

;"Desktop" = "800x600"

;

;[AppDefaultssol.exeVersion]

;"Windows" = "nt40"

;

;; Some games (Quake 2, UT) refuse to accept emulated dsound devices.

;; You can add an AppDefault entry like this for such cases.

;[AppDefaultspickygame.exedsound]

;"EmulDriver" = "N"

[AppDefaultsKazaa.exeDllOverrides]

"commctrl" = "native"

"comctl32" = "native"

"comdlg32" = "native"

"msvcrt" = "native"

"shdoclc" = "native"

"shdocvw" = "native"

"shlwapi" = "native"

"urlmon" = "native"

"wininet" = "native"

"rasapi32" = "native"

;"ole32" = "native"

;"oleaut32" = "native"

;"rpcrt4" = "native"

# </wineconf>

Any help greatly appreciated! I've been working on this for 3 days! :shock:

In case it helps I'm using the version of wine that came with 9.1 and I have a dual-boot system with ME on another HD.

May 30, 2003

Don't know anything of the app, but i assume you have read this;

 

CASmate and Flexi 5.x users will find it increasingly difficult to operate efficiently as new Windows Operating systems are introduced.  CASmate is an excellent 16-bit program, but all Windows versions since Win 95 are 32-bit Operating Systems.  This means CASmate no longer has full access  to Windows memory management,  which leads to "crashes" and loss of data. In order to continue to design and cut signs efficiently, you may have to upgrade to a 32 bit program, such as FlexiSign 6.6. Due to Flexi's innovative "Load Profile" feature, you will still be able to use CASmate's graphic user interface and icons if you wish. 

For upgrade information, see the chart below. These are list prices. Please call or e-mail for best price. Please have your CASmate user number handy so we can process your upgrade.

tyme · May 30, 2003

since CASMATE supposedly has problems with 32-bit systems, check the --winver option-there should be a way of telling wine to emulate earlier versions of windows with this option. if i had wine installed i'd give you a better idea, but i don't, this is just from memory...

mystified · May 30, 2003

I'll do some more google searching and see what I can find out about the winver option. Thanks!

Anon, yes I'm very familiar with that. The problem is that the other two computers that are running CASMATE have Win 98 on them. I tried installing Win 98 but since my computer is so new I couldn't find the drivers I needed. And the company I do contract work for will not upgrade because although the software isn't that expensive each HASP costs $2,000. Multiply that times 3 . . . :(

tyme · May 30, 2003

mysti: you could also try wine --help or man wine ;-) (the former is probably your best bet)

but that still may not solve your problem.

mystified · May 30, 2003

Thanks tyme but I already tried that.

I am getting a new error message. "Microsoft Visuall C++ Runtime Library, Error: MSVCRT.dll is not compatible with Win32s." :?

mystified · June 3, 2003

Okay, I downloaded and installed the latest version of wine I could find, 20030508, and found I was missing a few programs and after I installed them that fixed some of my problems. Through google research I was able to fix the rest. Now I'm down to ONE problem and although I get numerous google hits there's nothing that I read that tells me how to resolve the issue. It mostly talks about programming. :?

This is the error:

FIXME:pthread_cond_init

Anyone that can help me will get their very own personalized rank! :lol:

emh · June 4, 2003

Does the program still run with that error? If it does, I wouldn't worry about it.

mystified · June 4, 2003

It gets halfway through installation and then freezes. :(

Sign In

Wine Prob

Recommended Posts

mystified

Link to comment

Share on other sites

Guest anon

Link to comment

Share on other sites

tyme

Link to comment

Share on other sites

mystified

Link to comment

Share on other sites

tyme

Link to comment

Share on other sites

mystified

Link to comment

Share on other sites

mystified

Link to comment

Share on other sites

emh

Link to comment

Share on other sites

mystified

Link to comment

Share on other sites

Join the conversation

Browse

Activity