Guest Irick Posted February 28, 2008 Report Share Posted February 28, 2008 i'm having a similar problem, i have the drivers installed, i've set ndiswrapper's alias with -m, i've done everything with ndiswrapper i can, but in the GUI when i try to set up my card, not only does the card only sometimes appear under the network interface setup, i get an error dialog "Unable to find ndiswrapper interface!" also, iwconfig only has lo and eth0 in its output. and no wired network connection on the machine i'm running Mandriva on. and apparently no c compiler installed. ... Quote Link to comment Share on other sites More sharing options...
Guest ounas Posted March 10, 2008 Report Share Posted March 10, 2008 from the other site try thisIf yours does not list a device present, then you may need to explicitly instruct it to use the driver using this command: ndiswrapper -a devid mrv8335 Replace "devid" with the PCI ID or the USB ID of your card, in the form XXXX:XXXX. To get those numbers, run the command lspci -n (for PCI cards) we nee to find the full dev id of your card. lspic -nn the nn gives the number and name. then type the command replacing the devid... su ndiswrapper -a devid mrv8335 modprobe ndiswrapper iwconfig Thanks it now works, will boot and test again Quote Link to comment Share on other sites More sharing options...
Guest ounas Posted March 10, 2008 Report Share Posted March 10, 2008 Yes it work's will keep my older network in box for a while. Old card was a tp-link, new card d-link dwa-547 happy user :D Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.