ffi Posted December 28, 2007 Report Share Posted December 28, 2007 (edited) The new ati drivers are realllllyyy slow when aiglx is turned on, how should they be configured correctly for an x600 (mobility) radeon? I believe there have been some big changes in atis driver and Xfdrake doesnt do a good job yet. Could someone explain the difference between the opensource ati and radeon drivers? Edited December 28, 2007 by ffi Quote Link to comment Share on other sites More sharing options...
ffi Posted December 28, 2007 Author Report Share Posted December 28, 2007 # File generated by XFdrake (rev 230776) Section "Extensions" Option "Composite" EndSection # File generated by XFdrake (rev 230776) # ********************************************************************** # Refer to the xorg.conf man page for details about the format of # this file. # ********************************************************************** Section "ServerFlags" #DontZap # disable <Ctrl><Alt><BS> (server abort) AllowMouseOpenFail # allows the server to start up even if the mouse does not work #DontZoom # disable <Ctrl><Alt><KP_+>/<KP_-> (resolution switching) EndSection Section "Module" Load "dbe" # Double-Buffering Extension Load "v4l" # Video for Linux Load "extmod" Load "type1" Load "freetype" Load "glx" # 3D layer Load "dri" # direct rendering EndSection Section "InputDevice" Identifier "Keyboard1" Driver "kbd" Option "XkbModel" "acer_laptop" Option "XkbLayout" "us(alt-intl)" Option "XkbOptions" "compose:rwin" EndSection Section "InputDevice" Identifier "Mouse1" Driver "mouse" Option "Protocol" "ExplorerPS/2" Option "Device" "/dev/mouse" EndSection Section "InputDevice" Identifier "Mouse2" Driver "evdev" Option "bustype" "0x0003" Option "relBits" "+0+1+2" Option "product" "0xc019" Option "vendor" "0x046d" Option "HWheelRelativeAxisButtons" "7 6" EndSection Section "InputDevice" Identifier "SynapticsMouse1" Driver "synaptics" Option "EdgeMotionMinSpeed" "200" Option "MinSpeed" "0.8" Option "MaxSpeed" "1.00" Option "BottomEdge" "650" Option "EdgeMotionMaxSpeed" "200" Option "UpDownScrolling" "0" Option "CircScrollTrigger" "2" Option "SHMConfig" "on" Option "LeftEdge" "120" Option "FingerLow" "14" Option "HorizScrollDelta" "20" Option "MaxTapMove" "110" Option "FingerHigh" "15" Option "VertScrollDelta" "20" Option "CircularScrolling" "1" Option "TopEdge" "120" Option "RightEdge" "830" Option "AccelFactor" "0.015" EndSection Section "Monitor" Identifier "monitor1" VendorName "Generic" ModelName "Flat Panel 1280x800" HorizSync 31.5-90 VertRefresh 60 # TV fullscreen mode or DVD fullscreen output. # 768x576 @ 79 Hz, 50 kHz hsync ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630 # 768x576 @ 100 Hz, 61.6 kHz hsync ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616 # modeline generated by gtf(1) [handled by XFdrake] ModeLine "1280x800_120" 181.21 1280 1376 1520 1760 800 801 804 858 -HSync +Vsync # modeline generated by gtf(1) [handled by XFdrake] ModeLine "1280x800_100" 147.89 1280 1376 1512 1744 800 801 804 848 -HSync +Vsync # modeline generated by gtf(1) [handled by XFdrake] ModeLine "1280x800_85" 123.38 1280 1368 1504 1728 800 801 804 840 -HSync +Vsync # modeline generated by gtf(1) [handled by XFdrake] ModeLine "1280x800_75" 107.21 1280 1360 1496 1712 800 801 804 835 -HSync +Vsync # modeline generated by gtf(1) [handled by XFdrake] ModeLine "1280x800_60" 83.46 1280 1344 1480 1680 800 801 804 828 -HSync +Vsync # modeline generated by gtf(1) [handled by XFdrake] ModeLine "1280x800_50" 68.56 1280 1336 1472 1664 800 801 804 824 -HSync +Vsync EndSection Section "Device" Identifier "device1" VendorName "ATI Technologies Inc" BoardName "ATI Radeon 9500 to Radeon X1050" Driver "fglrx" Option "DPMS" #Option "AccelMethod" "EXA" #Option "XaaNoOffscreenPixmaps" "1" EndSection Section "Screen" Identifier "screen1" Device "device1" Monitor "monitor1" DefaultColorDepth 24 Subsection "Display" Depth 8 Modes "1280x800" EndSubsection Subsection "Display" Depth 15 Modes "1280x800" EndSubsection Subsection "Display" Depth 16 Modes "1280x800" EndSubsection Subsection "Display" Depth 24 Modes "1280x800" EndSubsection EndSection Section "ServerLayout" Identifier "layout1" InputDevice "Keyboard1" "CoreKeyboard" InputDevice "Mouse1" "CorePointer" InputDevice "Mouse2" "SendCoreEvents" InputDevice "SynapticsMouse1" "AlwaysCore" Screen "screen1" EndSection Quote Link to comment Share on other sites More sharing options...
scarecrow Posted December 28, 2007 Report Share Posted December 28, 2007 Our forum at Archlinux is also filled with complaints about the new ATi driver... and its not just about slowness. It seems that they (ATi) will never learn their lesson. Quote Link to comment Share on other sites More sharing options...
ffi Posted December 28, 2007 Author Report Share Posted December 28, 2007 I noticed. How do I disable the framebuffer console because it hangs the computer, only way is to restart is? Quote Link to comment Share on other sites More sharing options...
scarecrow Posted December 28, 2007 Report Share Posted December 28, 2007 Just open your /boot/grub/menu.lst config file and remove the "vga=7xx" argument. Of course your new VT will look ugly and with huge fonts, but... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.