Marco G Posted December 13, 2007 Report Share Posted December 13, 2007 (edited) Hi Well, since a reinstall of XP was in order I thought why not install Linux as my primary OS and use XP for the only thing I really, really don't want to do under Linux: Gaming (getting WoW to run under Cedega was a nightmare. The games I play today partially aren't even supported). Well, I've used Mandriva a few months back and I liked it but since everyone is using Ubuntu nowadays I gave that a shot. Well, after hours of not being able to install it properly (I guess I'm just that stupid or the installer doesn't like me) I gave up and tried kubuntu... and then SLED. Well, I came back and after throwing 2008 One out of the window I finally stuck with the 2008 Free DVD. And, well, stuff works, I can access the MP3s on my windows drive and so on. But one thing doesn't work: My second Flat Panel monitor. See, I'm using an HP f2105 as my main screen and a Samsung SyncMaster 570S as an add-on screen for stuff like IM and the likes. Just stuff you want to have open but out of the way, right? Windows does that. Linux does not. I followed a Xinerama tutorial on ubuntuforums.org but now, instead of the Samsung just displaying gibberish (due to a too high resolution I'd wager) it just doesn't display anything at all. Well, I'll add my xorg.conf and I'd be grateful if someone could point out where I made a mistake (I'm using NVIDIA drivers by the way). # File generated by XFdrake (rev 230776) Section "Extensions" Option "Composite" EndSection # ********************************************************************** # Refer to the xorg.conf man page for details about the format of # this file. # ********************************************************************** Section "ServerFlags" #DontZap # disable <Ctrl><Alt><BS> (server abort) #DontZoom # disable <Ctrl><Alt><KP_+>/<KP_-> (resolution switching) AllowMouseOpenFail # allows the server to start up even if the mouse does not work EndSection Section "Module" Load "dbe" # Double-Buffering Extension Load "v4l" # Video for Linux Load "extmod" Load "type1" Load "freetype" Load "glx" # 3D layer EndSection Section "InputDevice" Identifier "Keyboard1" Driver "kbd" Option "XkbModel" "pc105" Option "XkbLayout" "ch(de)" Option "XkbOptions" "compose:rwin" EndSection Section "InputDevice" Identifier "Mouse1" Driver "mouse" Option "Protocol" "ExplorerPS/2" Option "Device" "/dev/mouse" EndSection Section "InputDevice" Identifier "Mouse2" Driver "evdev" Option "bustype" "0x0003" Option "product" "0xc01e" Option "relBits" "+0+1+2" Option "HWheelRelativeAxisButtons" "7 6" Option "vendor" "0x046d" EndSection Section "Monitor" Identifier "Main Monitor" VendorName "Generic" ModelName "Flat Panel 1680x1050" HorizSync 31.5-90 VertRefresh 60 # TV fullscreen mode or DVD fullscreen output. # 768x576 @ 79 Hz, 50 kHz hsync ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630 # 768x576 @ 100 Hz, 61.6 kHz hsync ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616 # modeline generated by gtf(1) [handled by XFdrake] ModeLine "1680x1050_120" 313.20 1680 1816 2000 2320 1050 1051 1054 1125 -HSync +Vsync # modeline generated by gtf(1) [handled by XFdrake] ModeLine "1680x1050_100" 256.20 1680 1808 1992 2304 1050 1051 1054 1112 -HSync +Vsync # modeline generated by gtf(1) [handled by XFdrake] ModeLine "1680x1050_85" 214.51 1680 1800 1984 2288 1050 1051 1054 1103 -HSync +Vsync # modeline generated by gtf(1) [handled by XFdrake] ModeLine "1680x1050_75" 188.07 1680 1800 1984 2288 1050 1051 1054 1096 -HSync +Vsync # modeline generated by gtf(1) [handled by XFdrake] ModeLine "1680x1050_60" 147.14 1680 1784 1968 2256 1050 1051 1054 1087 -HSync +Vsync # modeline generated by gtf(1) [handled by XFdrake] ModeLine "1680x1050_50" 120.21 1680 1776 1952 2224 1050 1051 1054 1081 -HSync +Vsync # modeline generated by gtf(1) [handled by XFdrake] ModeLine "1600x1000_120" 284.04 1600 1728 1904 2208 1000 1001 1004 1072 -HSync +Vsync # modeline generated by gtf(1) [handled by XFdrake] ModeLine "1600x1000_100" 232.13 1600 1720 1896 2192 1000 1001 1004 1059 -HSync +Vsync # modeline generated by gtf(1) [handled by XFdrake] ModeLine "1600x1000_85" 194.21 1600 1712 1888 2176 1000 1001 1004 1050 -HSync +Vsync # modeline generated by gtf(1) [handled by XFdrake] ModeLine "1600x1000_75" 169.13 1600 1704 1880 2160 1000 1001 1004 1044 -HSync +Vsync # modeline generated by gtf(1) [handled by XFdrake] ModeLine "1600x1000_60" 133.14 1600 1704 1872 2144 1000 1001 1004 1035 -HSync +Vsync # modeline generated by gtf(1) [handled by XFdrake] ModeLine "1600x1000_50" 108.66 1600 1688 1856 2112 1000 1001 1004 1029 -HSync +Vsync # modeline generated by gtf(1) [handled by XFdrake] ModeLine "1440x900_120" 229.75 1440 1552 1712 1984 900 901 904 965 -HSync +Vsync # modeline generated by gtf(1) [handled by XFdrake] ModeLine "1440x900_100" 187.55 1440 1544 1704 1968 900 901 904 953 -HSync +Vsync # modeline generated by gtf(1) [handled by XFdrake] ModeLine "1440x900_85" 156.79 1440 1536 1696 1952 900 901 904 945 -HSync +Vsync # modeline generated by gtf(1) [handled by XFdrake] ModeLine "1440x900_75" 136.49 1440 1536 1688 1936 900 901 904 940 -HSync +Vsync # modeline generated by gtf(1) [handled by XFdrake] ModeLine "1440x900_60" 106.47 1440 1520 1672 1904 900 901 904 932 -HSync +Vsync # modeline generated by gtf(1) [handled by XFdrake] ModeLine "1440x900_50" 87.41 1440 1512 1664 1888 900 901 904 926 -HSync +Vsync # modeline generated by gtf(1) [handled by XFdrake] ModeLine "1280x800_120" 181.21 1280 1376 1520 1760 800 801 804 858 -HSync +Vsync # modeline generated by gtf(1) [handled by XFdrake] ModeLine "1280x800_100" 147.89 1280 1376 1512 1744 800 801 804 848 -HSync +Vsync # modeline generated by gtf(1) [handled by XFdrake] ModeLine "1280x800_85" 123.38 1280 1368 1504 1728 800 801 804 840 -HSync +Vsync # modeline generated by gtf(1) [handled by XFdrake] ModeLine "1280x800_75" 107.21 1280 1360 1496 1712 800 801 804 835 -HSync +Vsync # modeline generated by gtf(1) [handled by XFdrake] ModeLine "1280x800_60" 83.46 1280 1344 1480 1680 800 801 804 828 -HSync +Vsync # modeline generated by gtf(1) [handled by XFdrake] ModeLine "1280x800_50" 68.56 1280 1336 1472 1664 800 801 804 824 -HSync +Vsync EndSection Section "Monitor" Identifier "Second Monitor" VendorName "Samsung" ModelName "Samsung SyncMaster 570B TFT/580B TFT" HorizSync 30-61 VertRefresh 50-75 # TV fullscreen mode or DVD fullscreen output. # 768x576 @ 79 Hz, 50 kHz hsync ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630 # 768x576 @ 100 Hz, 61.6 kHz hsync ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616 EndSection Section "Device" Identifier "0 GeForce 7600" BoardName "NVIDIA GeForce 3 - GeForce 4 (96xx)" Driver "nvidia" Option "DPMS" Option "TwinViewOrientation" "Clone" Option "RenderAccel" "false" Option "AddARGBGLXVisuals" Option "TwinView" Option "IgnoreEDID" "1" Screen 0 Option "DDCMode" "True" EndSection Section "Device" Identifier "1 GeForce 7600" BoardName "NVIDIA GeForce 3 - GeForce 4 (96xx)" Driver "nvidia" Option "DPMS" Option "TwinViewOrientation" "Clone" Option "RenderAccel" "false" Option "AddARGBGLXVisuals" Option "TwinView" Option "IgnoreEDID" "1" Screen 1 Option "DDCMode" "True" EndSection Section "Screen" Identifier "Main Screen" Device "0 GeForce 7600" Monitor "Main Monitor" DefaultColorDepth 24 Subsection "Display" Depth 8 Modes "1680x1050" EndSubsection Subsection "Display" Depth 15 Modes "1680x1050" EndSubsection Subsection "Display" Depth 16 Modes "1680x1050" EndSubsection Subsection "Display" Depth 24 Modes "1680x1050" EndSubsection EndSection Section "Screen" Identifier "Second Screen" Device "1 GeForce 7600" Monitor "Second Monitor" DefaultColorDepth 24 Subsection "Display" Depth 8 Modes "1024x768" EndSubsection Subsection "Display" Depth 15 Modes "1024x768" EndSubsection Subsection "Display" Depth 16 Modes "1024x768" EndSubsection Subsection "Display" Depth 24 Modes "1024x768" EndSubsection EndSection Section "ServerLayout" Screen 0 "Main Screen" Screen 1 "Second Screen" LeftOf "Main Screen" Identifier "layout1" InputDevice "Keyboard1" "CoreKeyboard" InputDevice "Mouse1" "CorePointer" InputDevice "Mouse2" "SendCoreEvents" Option "Xinerama" "true" EndSection I hope someone can help me. I'd really like to replace XP as my main OS seeing as Vista is coming (let's face it, we can't evade it forever) and I just hate that crappy piece of 'software'. Thanks Edited December 13, 2007 by Marco G Quote Link to comment Share on other sites More sharing options...
jaraeez Posted December 13, 2007 Report Share Posted December 13, 2007 (edited) One thing I've noticed (maybe there's many more ..) you have Option "Xinerama" "true" as well as Option "TwinViewOrientation" "Clone" within you xorg.conf file - which to my understanding means your asking for one big desktop "Xinerama" & two small desktops running separately "TwinViewOrientation" "Clone" at the same time which won't work - You could try by hashing out one or the other then restart X11 (copy your xorg.conf first :) ) Edited December 13, 2007 by jaraeez Quote Link to comment Share on other sites More sharing options...
Marco G Posted December 14, 2007 Author Report Share Posted December 14, 2007 Well, I removed the TwinView Option and am still left with the Samsung monitor in standby. Quote Link to comment Share on other sites More sharing options...
jaraeez Posted December 15, 2007 Report Share Posted December 15, 2007 OK .. well here's my xorg.conf for ref: # File generated by XFdrake (rev 57713) # ********************************************************************** # Refer to the xorg.conf man page for details about the format of # this file. # ********************************************************************** Section "ServerLayout" Identifier "Multihead layout" Screen 0 "Screen0" LeftOf "Screen1" Screen 1 "Screen1" 0 0 InputDevice "Mouse1" "CorePointer" InputDevice "Keyboard1" "CoreKeyboard" Option "Xinerama" "off" Option "Clone" "on" EndSection Section "Files" # font server independent of the X server to render fonts. FontPath "unix/:-1" # minimal fonts to allow X to run without xfs FontPath "/usr/share/fonts/misc:unscaled" EndSection Section "ServerFlags" #DontZap # disable <Crtl><Alt><BS> (server abort) #DontZoom # disable <Crtl><Alt><KP_+>/<KP_-> (resolution switching) AllowMouseOpenFail # allows the server to start up even if the mouse does not work EndSection Section "Module" Load "dbe" # Double-Buffering Extension Load "v4l" # Video for Linux Load "extmod" Load "type1" Load "freetype" Load "/usr/lib/xorg/modules/extensions/nvidia/libglx.so" EndSection Section "InputDevice" Identifier "Keyboard1" Driver "kbd" Option "XkbModel" "pc105" Option "XkbLayout" "gb" Option "XkbOptions" "compose:rwin" EndSection Section "InputDevice" Identifier "Mouse1" Driver "mouse" Option "Protocol" "ExplorerPS/2" Option "Device" "/dev/mouse" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Dell 1702FP (Analog)" DisplaySize 340 270 ### Comment all HorizSync and VertSync values to use DDC: HorizSync 30.0 - 80.0 VertRefresh 56.0 - 76.0 #Option "dpms" EndSection Section "Monitor" Identifier "Monitor1" VendorName "Monitor Vendor" ModelName "Dell 1702FP (Analog)" ### Comment all HorizSync and VertSync values to use DDC: HorizSync 30.0 - 80.0 VertRefresh 56.0 - 76.0 #Option "dpms" EndSection Section "Device" Identifier "Videocard0" Driver "nvidia" VendorName "Videocard vendor" BoardName "nVidia Corporation NV17GL [Quadro4 200/400 NVS]" Option "RenderAccel" "True" Option "DisableGLXRootClipping" "true" Option "BackStoring" "True" EndSection Section "Device" Identifier "Videocard1" Driver "nvidia" VendorName "Videocard Vendor" BoardName "nVidia Corporation NV17GL [Quadro4 200/400 NVS]" BusID "PCI:1:0:0" Option "RenderAccel" "True" Option "DisableGLXRootClipping" "true" Option "BackStoring" "True" Screen 1 EndSection Section "Screen" Identifier "Screen0" Device "Videocard0" Monitor "Monitor0" DefaultDepth 16 SubSection "Display" Viewport 0 0 Depth 16 Modes "1280x1024" "1024x768" Option "AddARGBGLXVisuals" "True" EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Videocard1" Monitor "Monitor1" DefaultDepth 16 SubSection "Display" Viewport 0 0 Depth 16 Modes "1280x1024" "1024x768" Option "AddARGBGLXVisuals" "True" EndSubSection EndSection Section "Extensions" Option "Composite" "Enable" Option "RENDER" "Enable" EndSection #Section "DRI" #Group 0 #Mode 0666 #EndSection can you run this command as root lspci & post the output? Quote Link to comment Share on other sites More sharing options...
Marco G Posted December 15, 2007 Author Report Share Posted December 15, 2007 can you run this command as root lspci & post the output? 0:00.0 Host bridge: Intel Corporation 82P965/G965 Memory Controller Hub (rev 02) 00:01.0 PCI bridge: Intel Corporation 82P965/G965 PCI Express Root Port (rev 02) 00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Contoller #4 (rev 02) 00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02) 00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02) 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02) 00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 02) 00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev f2) 00:1f.0 ISA bridge: Intel Corporation 82801HB/HR (ICH8/R) LPC Interface Controller (rev 02) 00:1f.2 IDE interface: Intel Corporation 82801H (ICH8 Family) 4 port SATA IDE Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02) 00:1f.5 IDE interface: Intel Corporation 82801H (ICH8 Family) 2 port SATA IDE Controller (rev 02) 01:00.0 VGA compatible controller: nVidia Corporation G70 [GeForce 7600 GT] (rev a1) 02:00.0 SATA controller: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 02) 02:00.1 IDE interface: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 02) 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) Quote Link to comment Share on other sites More sharing options...
Marco G Posted December 15, 2007 Author Report Share Posted December 15, 2007 Hmmm I just realised that TwinView will actually do what I want... or at least I guess so. So I tried setting it up. And you know what? It works! Well, my second screen still doesn't display anything but I have larger Desktops than my main monitor can display. I also checked the sync rate. It's the one from the vendor specific driver that works stand-alone. I'll post my xorg.conf. If anyone sees a typo or an error, please let me know. # File generated by XFdrake (rev 230776) Section "Extensions" Option "Composite" EndSection # ********************************************************************** # Refer to the xorg.conf man page for details about the format of # this file. # ********************************************************************** Section "ServerFlags" #DontZap # disable <Ctrl><Alt><BS> (server abort) #DontZoom # disable <Ctrl><Alt><KP_+>/<KP_-> (resolution switching) AllowMouseOpenFail # allows the server to start up even if the mouse does not work EndSection Section "Module" Load "dbe" # Double-Buffering Extension Load "v4l" # Video for Linux Load "extmod" Load "type1" Load "freetype" Load "glx" # 3D layer EndSection Section "InputDevice" Identifier "Keyboard1" Driver "kbd" Option "XkbModel" "pc105" Option "XkbLayout" "ch(de)" Option "XkbOptions" "compose:rwin" EndSection Section "InputDevice" Identifier "Mouse1" Driver "mouse" Option "Protocol" "ExplorerPS/2" Option "Device" "/dev/mouse" EndSection Section "InputDevice" Identifier "Mouse2" Driver "evdev" Option "bustype" "0x0003" Option "product" "0xc01e" Option "relBits" "+0+1+2" Option "HWheelRelativeAxisButtons" "7 6" Option "vendor" "0x046d" EndSection Section "Monitor" Identifier "monitor1" VendorName "Generic" ModelName "Flat Panel 1680x1050" HorizSync 31.5-90 VertRefresh 60 # TV fullscreen mode or DVD fullscreen output. # 768x576 @ 79 Hz, 50 kHz hsync ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630 # 768x576 @ 100 Hz, 61.6 kHz hsync ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616 # modeline generated by gtf(1) [handled by XFdrake] ModeLine "1680x1050_120" 313.20 1680 1816 2000 2320 1050 1051 1054 1125 -HSync +Vsync # modeline generated by gtf(1) [handled by XFdrake] ModeLine "1680x1050_100" 256.20 1680 1808 1992 2304 1050 1051 1054 1112 -HSync +Vsync # modeline generated by gtf(1) [handled by XFdrake] ModeLine "1680x1050_85" 214.51 1680 1800 1984 2288 1050 1051 1054 1103 -HSync +Vsync # modeline generated by gtf(1) [handled by XFdrake] ModeLine "1680x1050_75" 188.07 1680 1800 1984 2288 1050 1051 1054 1096 -HSync +Vsync # modeline generated by gtf(1) [handled by XFdrake] ModeLine "1680x1050_60" 147.14 1680 1784 1968 2256 1050 1051 1054 1087 -HSync +Vsync # modeline generated by gtf(1) [handled by XFdrake] ModeLine "1680x1050_50" 120.21 1680 1776 1952 2224 1050 1051 1054 1081 -HSync +Vsync # modeline generated by gtf(1) [handled by XFdrake] ModeLine "1600x1000_120" 284.04 1600 1728 1904 2208 1000 1001 1004 1072 -HSync +Vsync # modeline generated by gtf(1) [handled by XFdrake] ModeLine "1600x1000_100" 232.13 1600 1720 1896 2192 1000 1001 1004 1059 -HSync +Vsync # modeline generated by gtf(1) [handled by XFdrake] ModeLine "1600x1000_85" 194.21 1600 1712 1888 2176 1000 1001 1004 1050 -HSync +Vsync # modeline generated by gtf(1) [handled by XFdrake] ModeLine "1600x1000_75" 169.13 1600 1704 1880 2160 1000 1001 1004 1044 -HSync +Vsync # modeline generated by gtf(1) [handled by XFdrake] ModeLine "1600x1000_60" 133.14 1600 1704 1872 2144 1000 1001 1004 1035 -HSync +Vsync # modeline generated by gtf(1) [handled by XFdrake] ModeLine "1600x1000_50" 108.66 1600 1688 1856 2112 1000 1001 1004 1029 -HSync +Vsync # modeline generated by gtf(1) [handled by XFdrake] ModeLine "1440x900_120" 229.75 1440 1552 1712 1984 900 901 904 965 -HSync +Vsync # modeline generated by gtf(1) [handled by XFdrake] ModeLine "1440x900_100" 187.55 1440 1544 1704 1968 900 901 904 953 -HSync +Vsync # modeline generated by gtf(1) [handled by XFdrake] ModeLine "1440x900_85" 156.79 1440 1536 1696 1952 900 901 904 945 -HSync +Vsync # modeline generated by gtf(1) [handled by XFdrake] ModeLine "1440x900_75" 136.49 1440 1536 1688 1936 900 901 904 940 -HSync +Vsync # modeline generated by gtf(1) [handled by XFdrake] ModeLine "1440x900_60" 106.47 1440 1520 1672 1904 900 901 904 932 -HSync +Vsync # modeline generated by gtf(1) [handled by XFdrake] ModeLine "1440x900_50" 87.41 1440 1512 1664 1888 900 901 904 926 -HSync +Vsync # modeline generated by gtf(1) [handled by XFdrake] ModeLine "1280x800_120" 181.21 1280 1376 1520 1760 800 801 804 858 -HSync +Vsync # modeline generated by gtf(1) [handled by XFdrake] ModeLine "1280x800_100" 147.89 1280 1376 1512 1744 800 801 804 848 -HSync +Vsync # modeline generated by gtf(1) [handled by XFdrake] ModeLine "1280x800_85" 123.38 1280 1368 1504 1728 800 801 804 840 -HSync +Vsync # modeline generated by gtf(1) [handled by XFdrake] ModeLine "1280x800_75" 107.21 1280 1360 1496 1712 800 801 804 835 -HSync +Vsync # modeline generated by gtf(1) [handled by XFdrake] ModeLine "1280x800_60" 83.46 1280 1344 1480 1680 800 801 804 828 -HSync +Vsync # modeline generated by gtf(1) [handled by XFdrake] ModeLine "1280x800_50" 68.56 1280 1336 1472 1664 800 801 804 824 -HSync +Vsync EndSection Section "Device" Identifier "device1" BoardName "NVIDIA GeForce 3 - GeForce 4 (96xx)" Driver "nvidia" Option "DPMS" Option "NvAGP" "1" Option "NoLogo" "True" Option "RenderAccel" "True" Option "TwinView" "True" Option "MetaModes" "DFP-0: 1680x1050, DFP-1: 1024x768; DFP-0: 1680x1050, DFP-1: NULL" Option "TwinViewOrientation" "DFP-0 RightOf DFP-1" Option "SecondMonitorHorizSync" "30-61" Option "SecondMonitorVertRefresh" "50-75" Option "ConnectedMonitor" "DFP-0,DFP-1" Option "UseDisplayDevice" "DFP-0,DFP-1" Option "HWcursor" "True" Option "CursorShadow" "True" Option "CursorShadowAlpha" "32" Option "CursorShadowXOffset" "3" Option "CursorShadowYOffset" "3" Option "TripleBuffer" "True" EndSection Section "Screen" Identifier "screen1" Device "device1" Monitor "monitor1" DefaultColorDepth 24 Subsection "Display" Viewport 0 0 Depth 16 Modes "1680x1050" "1024x768" EndSubsection Subsection "Display" Viewport 0 0 Depth 24 Modes "1680x1050" "1024x768" EndSubsection EndSection Section "ServerLayout" Identifier "TwinView Configuration" InputDevice "Keyboard1" "CoreKeyboard" InputDevice "Mouse1" "CorePointer" InputDevice "Mouse2" "SendCoreEvents" Screen 1 "Screen1" EndSection Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.