jilax13 Posted April 22, 2007 Author Report Share Posted April 22, 2007 Okay, I installed it and ran the command you told me to. Here is the output: Socket 1: product info: "Siemens", "SpeedStream Wireless PCMCIA", "", "" manfid: 0x02ac, 0x3021 function: 6 (network) There you go. Quote Link to comment Share on other sites More sharing options...
Greg2 Posted April 23, 2007 Report Share Posted April 23, 2007 That appears to be a prism chipset. Now we must see if it's trying to use the wrong driver. So in a terminal as root do: lsmod |grep hostap and lsmod |grep orinoco and post the output of both, if there's any. Quote Link to comment Share on other sites More sharing options...
jilax13 Posted April 23, 2007 Author Report Share Posted April 23, 2007 (edited) I typed them both in logged in as a simple user ("Josh") and as root. I got no responce. . . as "Josh" I got bash: lsmod: command not found and as root I got no output at all. Edited April 23, 2007 by jilax13 Quote Link to comment Share on other sites More sharing options...
Greg2 Posted April 23, 2007 Report Share Posted April 23, 2007 OK, now as root do: modprobe orinoco_cs and see if your card lights up. Quote Link to comment Share on other sites More sharing options...
jilax13 Posted April 23, 2007 Author Report Share Posted April 23, 2007 (edited) Well, my card is always lit up. It has two lights on it. . . one titled "Power" and one titled "Link." Both of these were lit up before I put in the command. Once I put it in the two lights stayed lit up. I got no output inside my terminal either. I think we have a couple of main problems: 1. The windows driver for my wireless card is buried inside an exe (windows). 2. I have no idea how to work with the kernel or install software from source. (AKA ndiswrapper, pcmcia_cs) 3. Obviously, there is no linux native driver for my card. PS. Are there wireless cards with native linux drivers? Just wondering if they exist. Thanks for all the help your giving me. Edited April 23, 2007 by jilax13 Quote Link to comment Share on other sites More sharing options...
jilax13 Posted April 26, 2007 Author Report Share Posted April 26, 2007 I found the driver for my card. It simply doesn't work with ndiswrapper. I am buying a card that does work (some netgear card). Once I get a new pc card it should work out of the box with the windows inf file. Thanks for your help, but I think I am going to take the easy way out. Quote Link to comment Share on other sites More sharing options...
Greg2 Posted April 26, 2007 Report Share Posted April 26, 2007 It's hard for me to help you with this because not only do I not have your card, but I'm not currently using wireless on a Mandriva system. I was hoping someone else here would offer you some help, but it's hard if you don't have the same card. The problem is that when the Mandriva Linux kernel doesn't recognize your card, you must bind the kernel driver to the card manfid. The way that is done has been recently changed... from the Mandriva wiki: If a card isn't binded to the correct driver, its device IDs should be added to the matching kernel module (the /etc/pcmcia/config file isn't used anymore).but they don't tell you where to bind it. I've even spent some time on irc #mandriva asking the devs, but didn't receive an answer. You use to be able to create a /etc/pcmcia/hermes.conf with a device using the orinoco_cs module, but it appears that will not longer work. I know that you probably do not understand all of that, but I'm posting it here in case someone else can help you with this. Your card 'should' work with one, or both the hostap and or orinoco_cs modules. Quote Link to comment Share on other sites More sharing options...
jilax13 Posted April 27, 2007 Author Report Share Posted April 27, 2007 Okay, thanks Greg. I am going to buy a Netgear WG511 V.2 54Mbps Wireless PC Card 32-bit Cardbus. It is on the list of ndiswrapper compatible cards and should be pretty plug and play. The list says it is compatible with the inf file on the windows install cd. If I have problems with it than I will create a new topic and post my questions to it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.