michaelcole Posted May 9, 2006 Report Share Posted May 9, 2006 I have two cameras one used to work now does not using the UDEV but before it worked fine using the dev_fs. I have looked about unsucessfully to find a reason why i have no /dev/video0 or anything like that. In the past you would configure it under the modprobe.conf but now that does not work i have added pwc to modprobe.preload to see if that would help. It at least loads the drivers but i do not have the devices added. I have switched on udev info logging and cannot see any major errors, i can see the driver loading but that is it. i know your going to ask for this so here is dmesg and the info from messages.. from messages.. May 9 11:33:49 Mcole kernel: Linux video capture interface: v1.00 May 9 11:33:49 Mcole kernel: pwc Philips webcam module version 9.0.2-unofficial loaded. May 9 11:33:49 Mcole kernel: pwc Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840. May 9 11:33:49 Mcole kernel: pwc Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30, May 9 11:33:49 Mcole kernel: pwc the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100. May 9 11:33:49 Mcole kernel: usbcore: registered new driver Philips webcam from dmesg pwc Philips webcam module version 9.0.2-unofficial loaded. pwc Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840. pwc Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30, pwc the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100 from lsmod pwc 44348 0 videodev 6880 1 pwc usbcore 100572 5 pwc,usb_storage,ehci_hcd,ohci_hcd I cannot see it loading the webcam.script at all.......... Quote Link to comment Share on other sites More sharing options...
michaelcole Posted May 9, 2006 Author Report Share Posted May 9, 2006 I have fixed it removed all dkms and reloaded all the then stepped through the dkms errors from manual starts. Loaded the correct driver spca5xxx and then added this to the modules file and it all works now.. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.