nasa01 Posted January 16, 2006 Report Share Posted January 16, 2006 Hi, I am trying to get an ATI remote (#5000001590a) and a serial ir blaster working via lirc 0.7.1. I have Mandriva 2006, with the following config files: modprobe.conf alias sound-slot-0 snd-intel8x0 install scsi_hostadapter /sbin/modprobe sata_nv; /bin/true remove snd-intel8x0 /sbin/modprobe -r snd-pcm-oss; /sbin/modprobe --first-time -r --ignore-remove snd-intel8x0 install snd-intel8x0 /sbin/modprobe --first-time --ignore-install snd-intel8x0 && { /sbin/modprobe snd-pcm-oss; /bin/true; } install usb-interface /sbin/modprobe ohci-hcd; /sbin/modprobe ehci-hcd; /bin/true alias ieee1394-controller ohci1394 alias eth0 forcedeth alias ath0 ath_pci alias eth1 eth1394 /etc/sysconfig/lircd # Customized setings for lirc daemon # The hardware driver to use, run lircd --driver=? for a list DRIVER=DEFAULT # Hardware driver module to load #HWMOD=atilibusb HWMOD=lirc_i2c HWMOD=lirc_serial HWMDD=atiusb HWMOD=lirc_dev # The device node that communicates with the IR device. # if you are using lirc_serial, set DEVICE to /dev/ttyS[0-9] # where 0-9 is the serial port your IR receiver is plugged # with devfs enabled DEVICE=/dev/lirc/0 #DEVICE=/dev/lirc/serial # without devfs #DEVICE=/dev/lirc # Serial port for the receiver (for serial driver) # COM1 (/dev/ttyS0) COM_PORT=/dev/ttyS0 DRIVER_OPTS="irq=4 io=0x3f8" # COM2 (/dev/ttyS1) #COM_PORT=/dev/ttyS1 #DRIVER_OPTS="irq=3 io=0x2f8" # COM3 (/dev/ttyS2) #COM_PORT=/dev/ttyS2 #DRIVER_OPTS="irq=4 io=0x3e8 # COM4 (/dev/ttyS3) #COM_PORT=/dev/ttyS3 #DRIVER_OPTS="irq=3 io=0x2e8" when I run irw all I get is a blank space (it seems to be waiting) but it doesn't show any of my button mashing... ps aux | grep lircd root 5617 0.0 0.1 2760 948 ? Ss Jan15 0:00 lircd --driver=DEFAULT --device=/dev/lirc/0 smithna 12097 0.0 0.1 2028 652 pts/0 S+ 07:25 0:00 grep lircd from message logfile Jan 15 20:50:02 mythtv lircd-0.7.1[5430]: lircd(any) ready Jan 15 20:50:02 mythtv lircd: lircd startup succeeded Jan 15 20:50:02 mythtv lircd-0.7.1[5430]: accepted new client on /dev/lircd Jan 15 20:50:02 mythtv lircmd: lircmd startup succeeded Jan 15 20:50:05 mythtv lircd-0.7.1[5430]: accepted new client on /dev/lircd Jan 15 20:50:17 mythtv lircd-0.7.1[5430]: removed client Any help would be appreciated -- if more info is needed (like lircd.conf, which is 500 lines) let me know Nasa01 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.