UponFirstListen Posted October 9, 2005 Report Share Posted October 9, 2005 (edited) I say another because I must have read a hundred others, all offering no help for my setup. Asus A7N8X-X MB Athlon XP 512 DDR Ram 160GB HD 80GB HD DVD/CD-RW Mandrake 2005 LE (10.2) Kerenl 2.6.11-6mdk Honestly can't tell which IVTV driver is loaded and functioning. i've gone from the 0.2 series to URPMI ivtv and URPMI dkms-ivtv and finally to the 0.3 series. Somewhere along the way, it found a way to work. MythTV is up and running, allowing me to watch, record and play back TV, but when I try to fix my xorg.conf to allow TV-Out, I get no dice. Below is my working xorg.con and two versions that don't work. Any help is appreciated. Thanks. WORKING Code: # File generated by XFdrake. # ********************************************************************** # Refer to the XF86Config man page for details about the format of # this file. # ********************************************************************** Section "Files" # Multiple FontPath entries are allowed (they are concatenated together) # By default, Mandrake 6.0 and later now use a font server independent of # the X server to render fonts. FontPath "unix/:-1" EndSection Section "ServerFlags" #DontZap # disable <Crtl><Alt><BS> (server abort) #DontZoom # disable <Crtl><Alt><KP_+>/<KP_-> (resolution switching) AllowMouseOpenFail # allows the server to start up even if the mouse does not work EndSection Section "Module" Load "dbe" # Double-Buffering Extension Load "v4l" # Video for Linux Load "extmod" Load "type1" Load "freetype" Load "glx" # 3D layer EndSection Section "InputDevice" Identifier "Keyboard1" Driver "keyboard" Option "XkbModel" "pc105" Option "XkbLayout" "en_US" Option "XkbOptions" "compose:rwin" EndSection Section "InputDevice" Identifier "Mouse1" Driver "mouse" Option "Protocol" "ExplorerPS/2" Option "Device" "/dev/mouse" Option "ZAxisMapping" "6 7" EndSection Section "Monitor" Identifier "monitor1" VendorName "Plug'n Play" ModelName "DELL M992" HorizSync 30-96 VertRefresh 50-160 # TV fullscreen mode or DVD fullscreen output. # 768x576 @ 79 Hz, 50 kHz hsync ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630 # 768x576 @ 100 Hz, 61.6 kHz hsync ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616 EndSection Section "Device" Identifier "device1" VendorName "nVidia Corp." BoardName "NVIDIA GeForce4 (generic)" Driver "nv" Option "DPMS" EndSection Section "Screen" Identifier "screen1" Device "device1" Monitor "monitor1" DefaultColorDepth 24 Subsection "Display" Depth 8 Virtual 1280 960 EndSubsection Subsection "Display" Depth 15 Virtual 1280 960 EndSubsection Subsection "Display" Depth 16 Virtual 1280 960 EndSubsection Subsection "Display" Depth 24 Virtual 1280 960 EndSubsection EndSection Section "ServerLayout" Identifier "layout1" InputDevice "Keyboard1" "CoreKeyboard" InputDevice "Mouse1" "CorePointer" Screen "screen1" EndSection NOT WORKING Code: # File generated by XFdrake. # ********************************************************************** # Refer to the XF86Config man page for details about the format of # this file. # ********************************************************************** Section "Files" # Multiple FontPath entries are allowed (they are concatenated together) # By default, Mandrake 6.0 and later now use a font server independent of # the X server to render fonts. FontPath "unix/:-1" EndSection Section "ServerFlags" #DontZap # disable <Crtl><Alt><BS> (server abort) #DontZoom # disable <Crtl><Alt><KP_+>/<KP_-> (resolution switching) AllowMouseOpenFail # allows the server to start up even if the mouse does not work EndSection Section "Module" Load "dbe" # Double-Buffering Extension Load "v4l" # Video for Linux Load "extmod" Load "type1" Load "freetype" Load "glx" # 3D layer EndSection Section "InputDevice" Identifier "Keyboard1" Driver "keyboard" Option "XkbModel" "pc105" Option "XkbLayout" "en_US" Option "XkbOptions" "compose:rwin" EndSection Section "InputDevice" Identifier "Mouse1" Driver "mouse" Option "Protocol" "ExplorerPS/2" Option "Device" "/dev/mouse" Option "ZAxisMapping" "6 7" EndSection Section "Monitor" Identifier "NTSC Television on Hauppauge card" # D: 34.563 MHz, H: 37.244 kHz, V: 73.897 Hz HorizSync 30-68 VertRefresh 50-120 Mode "720x480" DotClock 34.564 HTimings 720 752 840 928 VTimings 480 484 488 504 Flags "-Hsync" "-Vsync" EndMode EndSection Section "Device" Identifier "device1" VendorName "nVidia Corp." BoardName "NVIDIA GeForce4 (generic)" Driver "nv" Option "DPMS" EndSection Section "Device" Identifier "Hauppauge WinTV PVR 350" # Driver "fbdev" Driver "ivtvdev" # Option "ivtv" "/dev/fb1" Option "fbdev" "/dev/fb1" BusID "PCI:1:8:0" EndSection Section "Screen" Identifier "Hauppauge Screen" Device "Hauppauge WinTV PVR 350" Monitor "NTSC Television on Hauppauge card" DefaultDepth 24 DefaultFbbpp 32 Subsection "Display" Depth 24 FbBpp 32 Modes "720x480" EndSubsection EndSection Section "ServerLayout" Identifier "layout1" InputDevice "Keyboard1" "CoreKeyboard" InputDevice "Mouse1" "CorePointer" Screen "Hauppauge Screen" EndSection ALSO NOT WORKING Code: # File generated by XFdrake. # ********************************************************************** # Refer to the XF86Config man page for details about the format of # this file. # ********************************************************************** Section "Files" # Multiple FontPath entries are allowed (they are concatenated together) # By default, Mandrake 6.0 and later now use a font server independent of # the X server to render fonts. FontPath "unix/:-1" EndSection Section "ServerFlags" #DontZap # disable <Crtl><Alt><BS> (server abort) #DontZoom # disable <Crtl><Alt><KP_+>/<KP_-> (resolution switching) AllowMouseOpenFail # allows the server to start up even if the mouse does not work EndSection Section "Module" Load "dbe" # Double-Buffering Extension Load "v4l" # Video for Linux Load "extmod" Load "type1" Load "freetype" Load "glx" # 3D layer EndSection Section "InputDevice" Identifier "Keyboard1" Driver "keyboard" Option "XkbModel" "pc105" Option "XkbLayout" "en_US" Option "XkbOptions" "compose:rwin" EndSection Section "InputDevice" Identifier "Mouse1" Driver "mouse" Option "Protocol" "ExplorerPS/2" Option "Device" "/dev/mouse" Option "ZAxisMapping" "6 7" EndSection Section "ServerLayout" Identifier "XFree86 Configured" Screen 0 "TV Screen" InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Monitor" Identifier "NTSC Monitor" HorizSync 30-68 VertRefresh 50-120 Mode "720x480" # D: 34.563 MHz, H: 37.244 kHz, V: 73.897 Hz DotClock 34.564 HTimings 720 752 840 928 VTimings 480 484 488 504 Flags "-HSync" "-VSync" EndMode EndSection Section "Device" Identifier "Hauppauge PVR 350 iTVC15 Framebuffer" Driver "fbdev" ### change fb1 to whatever number you got in the previous section Option "fbdev" "/dev/fb1" ### change the busid to whatever is reported by lspci. Note that ### output of lspci is hex, so add a preceding "0x" to the BusID BusID "0:0x08:0" EndSection Section "Screen" Identifier "TV Screen" Device "Hauppauge PVR 350 iTVC15 Framebuffer" Monitor "NTSC Monitor" DefaultDepth 24 DefaultFbbpp 32 Subsection "Display" Depth 24 FbBpp 32 Modes "720x480" EndSubsection EndSection Thanks again. Edited October 9, 2005 by UponFirstListen Quote Link to comment Share on other sites More sharing options...
devries Posted October 9, 2005 Report Share Posted October 9, 2005 Tip: to find out what module you're using, open a console, login as root and type: modinfo ivtv Quote Link to comment Share on other sites More sharing options...
UponFirstListen Posted October 9, 2005 Author Report Share Posted October 9, 2005 Thanks, didn't know about the modinfo. It's Version 0.2.0-rc3h Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.