SilverSurfer60 Posted June 14, 2005 Report Share Posted June 14, 2005 (edited) Hello to one and all. Although this is my first post on this BB I don't consider myself as a newbie to computers as I have been using and abusing them for some 25+ years. I am a newbie to Linux as I have only had the system for about 8months or so. Now the problem: I am unable to get my creative webcam to operate in LE2005. It worked fine with mdk10.0 and mdk 10.1 but not LE2005. I have gone through syslog, dmesg and system message files. Everything checks out until the following lines i.e. kernel: kobject_register failed for ov511 (-17) kernel: [dump_stack+30/32] dump_stack+0x1e/0x20 kernel: [<c0103c8e>] dump_stack+0x1e/0x20 kernel: [kobject_register+91/112] kobject_register+0x5b/0x70 kernel: [<c02143fb>] kobject_register+0x5b/0x70 kernel: [bus_add_driver+113/208] bus_add_driver+0x71/0xd0 kernel: [<c0281e51>] bus_add_driver+0x71/0xd0 kernel: [driver_register+49/64] driver_register+0x31/0x40 kernel: [<c02824c1>] driver_register+0x31/0x40 kernel: [pg0+277541226/1068971008] usb_register+0x4a/0xb0 [usbcore] kernel: [<d0d3a16a>] usb_register+0x4a/0xb0 [usbcore] kernel: [pg0+276492307/1068971008] usb_ov511_init+0x13/0x36 [ov511] kernel: [<d0c3a013>] usb_ov511_init+0x13/0x36 [ov511] kernel: [sys_init_module+482/624] sys_init_module+0x1e2/0x270 kernel: [<c018a952>] sys_init_module+0x1e2/0x270 kernel: [sysenter_past_esp+82/117] sysenter_past_esp+0x52/0x75 kernel: [<c0102e5d>] sysenter_past_esp+0x52/0x75 kernel: usbcore: error -17 registering driver ov511 I have googled and posted in newsgroups without success. I had only one reply which suggests to me it is my setup is at fault. Any help will be greatly appreciated. Thank you. Since posting the above I have found someone else having the same problem, and with no replies to boot. So it is not just my setup. !@*? Colin... Edited June 15, 2005 by SilverSurfer60 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.