kristi Posted March 30, 2005 Report Share Posted March 30, 2005 (edited) EDIT: 21MAY05 It is best to download latest Mandrake rpm Guarddog from author on page http://www.simonzone.com/software/guarddog/#download http://www.simonzone.com/software/mdkrpm/g...0-2mdk.i586.rpm and install it by clicking on it, then start it (from menu,system,configuration,guarddog) and set your parameters - only then are you protected. . Ignore the patch below. (it is still needed if you get guarddog from Mandriva easyurpmi) a note on guard dog - MDK10.2, MDK2005LE and after - don't forget - after you have installed guarddog and set up the parameters the way you want them, run if [ ! -e /etc/sysconfig/network-scripts/ifup.d/10Guarddog ]; then /bin/ln -s /etc/rc.firewall /etc/sysconfig/network-scripts/ifup.d/10Guarddog fi if [ ! -e /etc/sysconfig/network-scripts/ifdown.d/10Guarddog ]; then /bin/ln -s /etc/rc.firewall /etc/sysconfig/network-scripts/ifdown.d/10Guarddog fi as a ROOT SHELL otherwise it won't activate on reboot. guarddog prob. Code from Rolf Pederson. Kristi Edited May 21, 2005 by kristi Quote Link to comment Share on other sites More sharing options...
daniewicz Posted March 31, 2005 Report Share Posted March 31, 2005 I have never had this kind of problem with guarddog. Mandrake 10.1 guarddog-2.4.0-2mdk Quote Link to comment Share on other sites More sharing options...
kristi Posted March 31, 2005 Author Report Share Posted March 31, 2005 It's a 10.2 / MDK2005LE and after problem. I changed the original note. Thanks. Quote Link to comment Share on other sites More sharing options...
daniewicz Posted March 31, 2005 Report Share Posted March 31, 2005 AAAhhhhhh......I thought maybe I was missing something! :unsure: Quote Link to comment Share on other sites More sharing options...
hippocampe Posted February 20, 2007 Report Share Posted February 20, 2007 I upgraded from guarddog 2.4 to 2.5 recently and I got a similar problem. I got both rpm packages from the author's website and I have Mdv2007. All outgoing connections will work but the ports I opened on my machine don't work when I start the ADSL connection. After the adsl connection is up, I have to start guarddog and press the "apply" button before these ports will work. I use rp-pppoe to start my adsl connection. This was not a problem at all in 10.1 The two symlinks kristi mentioned in the previous reply are all present on my machine and point to the correct destination. Any ideas? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.