Guest Lysit Posted March 8, 2005 Report Share Posted March 8, 2005 Did as instructed in http://mandrakeusers.org/index.php?showtop...rpm%20xorg&st=0. [finch@localhost finch]$ fglrxinfo display: :0.0 screen: 0 OpenGL vendor string: Mesa project: www.mesa3d.org OpenGL renderer string: Mesa GLX Indirect OpenGL version string: 1.2 (1.5 Mesa 6.2.1) Reports kernel error or something, full log from file:/var/log/Xorg.0.log X Window System Version 6.8.2 Release Date: 9 February 2005 X Protocol Version 11, Revision 0, Release 6.8.2 Build Operating System: Linux 2.6.8.1-20mdk i686 [ELF] Current Operating System: Linux localhost 2.6.8.1-12mdk #1 Fri Oct 1 12:53:41 CEST 2004 i686 Build Date: 17 February 2005 Before reporting problems, check http://wiki.X.Org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Tue Mar 8 21:52:04 2005 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "Server Layout" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "ATI Graphics Adapter" (**) |-->Input Device "Mouse1" (**) |-->Input Device "Keyboard1" (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled, /usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (II) Open APM successful (II) Module ABI versions: X.Org ANSI C Emulation: 0.2 X.Org Video Driver: 0.7 X.Org XInput driver : 0.4 X.Org Server Extension : 0.2 X.Org Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 ABI class: X.Org Video Driver, version 0.7 Using vt 7 (--) using VT number 7 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1039,0746 card 1019,1808 rev 10 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 1039,0002 card 0000,0000 rev 00 class 06,04,00 hdr 01 (II) PCI: 00:02:0: chip 1039,0963 card 0000,0000 rev 25 class 06,01,00 hdr 80 (II) PCI: 00:02:1: chip 1039,0016 card 0000,0000 rev 00 class 0c,05,00 hdr 00 (II) PCI: 00:02:5: chip 1039,5513 card 1019,1808 rev 00 class 01,01,80 hdr 00 (II) PCI: 00:02:7: chip 1039,7012 card 1019,1808 rev a0 class 04,01,00 hdr 00 (II) PCI: 00:03:0: chip 1039,7001 card 1019,1808 rev 0f class 0c,03,10 hdr 80 (II) PCI: 00:03:1: chip 1039,7001 card 1019,1808 rev 0f class 0c,03,10 hdr 00 (II) PCI: 00:03:2: chip 1039,7002 card 1019,1808 rev 00 class 0c,03,20 hdr 00 (II) PCI: 00:04:0: chip 1039,0900 card 1019,1808 rev 91 class 02,00,00 hdr 00 (II) PCI: 00:0a:0: chip 127a,2015 card 127a,2015 rev 01 class 07,80,00 hdr 00 (II) PCI: 01:00:0: chip 1002,4152 card 1681,0002 rev 00 class 03,00,00 hdr 80 (II) PCI: 01:00:1: chip 1002,4172 card 1681,0003 rev 00 class 03,80,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:1:0), (0,1,2), BCTRL: 0x000a (VGA_EN is set) (II) Bus 1 I/O range: [0] -1 0 0x0000a000 - 0x0000afff (0x1000) IX[B] (II) Bus 1 non-prefetchable memory range: [0] -1 0 0xcfd00000 - 0xcfefffff (0x200000) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0 0x8fa00000 - 0xcfbfffff (0x40200000) MX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:2:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (--) PCI:*(1:0:0) ATI Technologies Inc RV350 AR [Radeon 9600] rev 0, Mem @ 0xb0000000/28, 0xcfef0000/16, I/O @ 0xa800/8, BIOS @ 0xcfec0000/17 (--) PCI: (1:0:1) ATI Technologies Inc RV350 AR [Radeon 9600] (Secondary) rev 0, Mem @ 0xa0000000/28, 0xcfee0000/16 (II) Addressable bus resource ranges are [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) PCI Memory resource overlap reduced 0xd0000000 from 0xd7ffffff to 0xcfffffff (II) Active PCI resource ranges: [0] -1 0 0xcffe0000 - 0xcffeffff (0x10000) MX[B] [1] -1 0 0xcfffc000 - 0xcfffcfff (0x1000) MX[B] [2] -1 0 0xcffff000 - 0xcfffffff (0x1000) MX[B] [3] -1 0 0xcfffe000 - 0xcfffefff (0x1000) MX[B] [4] -1 0 0xcfffd000 - 0xcfffdfff (0x1000) MX[B] [5] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O [6] -1 0 0xcfee0000 - 0xcfeeffff (0x10000) MX[B](B) [7] -1 0 0xa0000000 - 0xafffffff (0x10000000) MX[B](B) [8] -1 0 0xcfec0000 - 0xcfedffff (0x20000) MX[B](B) [9] -1 0 0xcfef0000 - 0xcfefffff (0x10000) MX[B](B) [10] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[B](B) [11] -1 0 0x0000d000 - 0x0000d007 (0x8) IX[B] [12] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B] [13] -1 0 0x0000d800 - 0x0000d87f (0x80) IX[B] [14] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B] [15] -1 0 0x0000ff00 - 0x0000ff0f (0x10) IX[B] [16] -1 0 0x00000c00 - 0x00000c1f (0x20) IX[B] [17] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B](B) (II) Active PCI resource ranges after removing overlaps: [0] -1 0 0xcffe0000 - 0xcffeffff (0x10000) MX[B] [1] -1 0 0xcfffc000 - 0xcfffcfff (0x1000) MX[B] [2] -1 0 0xcffff000 - 0xcfffffff (0x1000) MX[B] [3] -1 0 0xcfffe000 - 0xcfffefff (0x1000) MX[B] [4] -1 0 0xcfffd000 - 0xcfffdfff (0x1000) MX[B] [5] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O [6] -1 0 0xcfee0000 - 0xcfeeffff (0x10000) MX[B](B) [7] -1 0 0xa0000000 - 0xafffffff (0x10000000) MX[B](B) [8] -1 0 0xcfec0000 - 0xcfedffff (0x20000) MX[B](B) [9] -1 0 0xcfef0000 - 0xcfefffff (0x10000) MX[B](B) [10] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[B](B) [11] -1 0 0x0000d000 - 0x0000d007 (0x8) IX[B] [12] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B] [13] -1 0 0x0000d800 - 0x0000d87f (0x80) IX[B] [14] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B] [15] -1 0 0x0000ff00 - 0x0000ff0f (0x10) IX[B] [16] -1 0 0x00000c00 - 0x00000c1f (0x20) IX[B] [17] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B](B) (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) All system resource ranges: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xcffe0000 - 0xcffeffff (0x10000) MX[B] [6] -1 0 0xcfffc000 - 0xcfffcfff (0x1000) MX[B] [7] -1 0 0xcffff000 - 0xcfffffff (0x1000) MX[B] [8] -1 0 0xcfffe000 - 0xcfffefff (0x1000) MX[B] [9] -1 0 0xcfffd000 - 0xcfffdfff (0x1000) MX[B] [10] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O [11] -1 0 0xcfee0000 - 0xcfeeffff (0x10000) MX[B](B) [12] -1 0 0xa0000000 - 0xafffffff (0x10000000) MX[B](B) [13] -1 0 0xcfec0000 - 0xcfedffff (0x20000) MX[B](B) [14] -1 0 0xcfef0000 - 0xcfefffff (0x10000) MX[B](B) [15] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[B](B) [16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [17] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [18] -1 0 0x0000d000 - 0x0000d007 (0x8) IX[B] [19] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B] [20] -1 0 0x0000d800 - 0x0000d87f (0x80) IX[B] [21] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B] [22] -1 0 0x0000ff00 - 0x0000ff0f (0x10) IX[B] [23] -1 0 0x00000c00 - 0x00000c1f (0x20) IX[B] [24] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B](B) (II) LoadModule: "dbe" (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a (II) Module dbe: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.2 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "type1" (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a (II) Module type1: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.2 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.4 (II) Loading font Type1 (II) Loading font CID (II) LoadModule: "freetype" (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project" compiled for 6.8.2, module version = 2.1.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.4 (II) Loading font FreeType (II) LoadModule: "glx" (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a (II) Module glx: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.2 (II) Loading sub module "GLcore" (II) LoadModule: "GLcore" (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a (II) Module GLcore: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.2 (II) Loading extension GLX (II) LoadModule: "dri" (II) Loading /usr/X11R6/lib/modules/extensions/libdri.a (II) Module dri: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.2 (II) Loading sub module "drm" (II) LoadModule: "drm" (II) Loading /usr/X11R6/lib/modules/linux/libdrm.a (II) Module drm: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.2 (II) Loading extension XFree86-DRI (II) LoadModule: "extmod" (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a (II) Module extmod: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.2 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension DPMS (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "fglrx" (II) Loading /usr/X11R6/lib/modules/drivers/fglrx_drv.o (II) Module fglrx: vendor="FireGL - ATI Technologies Inc." compiled for 4.3.99.902, module version = 8.10.19 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 0.7 (II) LoadModule: "mouse" (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o (II) Module mouse: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.4 (II) LoadModule: "kbd" (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.o (II) Module kbd: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.4 (II) ATI Radeon/FireGL: The following chipsets are supported: RADEON 9000/9000 PRO (RV250 4966), RADEON 9000 LE (RV250 4967), MOBILITY FireGL 9000 (M9 4C64), MOBILITY RADEON 9000 (M9 4C66), RADEON 9000 PRO (D9 4C67), RADEON 9250 (RV280 5960), RADEON 9200 (RV280 5961), RADEON 9200 SE (RV280 5964), MOBILITY RADEON 9200 (M9+ 5C61), MOBILITY RADEON 9200 (M9+ 5C63), FireGL 8800 (R200 5148), RADEON 8500 (R200 514C), RADEON 9100 (R200 514D), RADEON 8500 AIW (R200 4242), RADEON 9600 (RV350 4150), RADEON 9600 SE (RV350 4151), RADEON 9600 PRO (RV360 4152), MOBILITY RADEON 9600/9700 (M10/M11 4E50), RADEON 9500 (R300 4144), RADEON 9600 TX (R300 4146), FireGL Z1 (R300 4147), RADEON 9700 PRO (R300 4E44), RADEON 9500 PRO/9700 (R300 4E45), RADEON 9600 TX (R300 4E46), FireGL X1 (R300 4E47), RADEON 9800 SE (R350 4148), RADEON 9550 (RV350 4153), FireGL T2 (RV350 4154), RADEON 9800 PRO (R350 4E48), RADEON 9800 (R350 4E49), RADEON 9800 XT (R360 4E4A), FireGL X2-256/X2-256t (R350 4E4B), MOBILITY FireGL T2/T2e (M10/M11 4E54), RADEON X300 (RV370 5B60), RADEON X600 (RV380 5B62), FireGL V3100 (RV370 5B64), MOBILITY RADEON X300 (M22 5460), MOBILITY FireGL V3100 (M22 5464), RADEON X600 (RV380 3E50), FireGL V3200* (RV380 3E54), MOBILITY RADEON X600 (M24 3150), MOBILITY RADEON X300 (M22 3152), MOBILITY FireGL V3200 (M24 3154), RADEON X800 (R420 4A48), RADEON X800 PRO (R420 4A49), RADEON X800 SE (R420 4A4A), RADEON X800 XT (R420 4A4B), RADEON X800 (R420 4A4C), FireGL X3-256 (R420 4A4D), MOBILITY RADEON 9800 (M18 4A4E), RADEON X800 XT Platinum Edition (R420 4A50), RADEON X800 (R423 5548), RADEON X800 PRO (R423 5549), RADEON X800 XT Platinum Edition (R423 554A), RADEON X800 SE (R423 554B), RADEON X800 XT (R423 5D57), FireGL V7100 (R423 5550), FireGL V5100 (R423 5551), MOBILITY RADEON X800 XT (M28 5D48), MOBILITY FireGL V5100* (M28 5D49), FireGL V5000 (RV410 5E48), RADEON X700 XT (RV410 5E4A), RADEON X700 PRO (RV410 5E4B), RADEON X700 SE (RV410 5E4C), RADEON X700 (RV410 5E4D), RADEON X700 (RV410 5E4F), RADEON 9100 IGP (RS300 5834), RADEON 9000 PRO/9100 PRO IGP (RS350 7834), MOBILITY RADEON 9000/9100 IGP (RS300M 5835) (II) Primary Device is: PCI 01:00:0 (WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found (--) Chipset RADEON 9600 PRO (RV360 4152) found (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xcffe0000 - 0xcffeffff (0x10000) MX[B] [6] -1 0 0xcfffc000 - 0xcfffcfff (0x1000) MX[B] [7] -1 0 0xcffff000 - 0xcfffffff (0x1000) MX[B] [8] -1 0 0xcfffe000 - 0xcfffefff (0x1000) MX[B] [9] -1 0 0xcfffd000 - 0xcfffdfff (0x1000) MX[B] [10] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O [11] -1 0 0xcfee0000 - 0xcfeeffff (0x10000) MX[B](B) [12] -1 0 0xa0000000 - 0xafffffff (0x10000000) MX[B](B) [13] -1 0 0xcfec0000 - 0xcfedffff (0x20000) MX[B](B) [14] -1 0 0xcfef0000 - 0xcfefffff (0x10000) MX[B](B) [15] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[B](B) [16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [17] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [18] -1 0 0x0000d000 - 0x0000d007 (0x8) IX[B] [19] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B] [20] -1 0 0x0000d800 - 0x0000d87f (0x80) IX[B] [21] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B] [22] -1 0 0x0000ff00 - 0x0000ff0f (0x10) IX[B] [23] -1 0 0x00000c00 - 0x00000c1f (0x20) IX[B] [24] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B](B) (II) fglrx(0): pEnt->device->identifier=0x821dc68 (II) resource ranges after probing: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xcffe0000 - 0xcffeffff (0x10000) MX[B] [6] -1 0 0xcfffc000 - 0xcfffcfff (0x1000) MX[B] [7] -1 0 0xcffff000 - 0xcfffffff (0x1000) MX[B] [8] -1 0 0xcfffe000 - 0xcfffefff (0x1000) MX[B] [9] -1 0 0xcfffd000 - 0xcfffdfff (0x1000) MX[B] [10] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O [11] -1 0 0xcfee0000 - 0xcfeeffff (0x10000) MX[B](B) [12] -1 0 0xa0000000 - 0xafffffff (0x10000000) MX[B](B) [13] -1 0 0xcfec0000 - 0xcfedffff (0x20000) MX[B](B) [14] -1 0 0xcfef0000 - 0xcfefffff (0x10000) MX[B](B) [15] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[B](B) [16] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [17] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [18] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [20] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [21] -1 0 0x0000d000 - 0x0000d007 (0x8) IX[B] [22] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B] [23] -1 0 0x0000d800 - 0x0000d87f (0x80) IX[B] [24] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B] [25] -1 0 0x0000ff00 - 0x0000ff0f (0x10) IX[B] [26] -1 0 0x00000c00 - 0x00000c1f (0x20) IX[B] [27] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B](B) [28] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [29] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (II) fglrx(0): === [R200PreInit] === begin, [s] (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/X11R6/lib/modules/libvgahw.a (II) Module vgahw: vendor="X.Org Foundation" compiled for 6.8.2, module version = 0.1.0 ABI class: X.Org Video Driver, version 0.7 (II) fglrx(0): PCI bus 1 card 0 func 0 (**) fglrx(0): Depth 24, (--) framebuffer bpp 32 (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps) (==) fglrx(0): Default visual is TrueColor (**) fglrx(0): Option "NoAccel" "no" (**) fglrx(0): Option "NoDRI" "no" (**) fglrx(0): Option "Capabilities" "0x00000000" (**) fglrx(0): Option "GammaCorrectionI" "0x00000000" (**) fglrx(0): Option "GammaCorrectionII" "0x00000000" (**) fglrx(0): Option "OpenGLOverlay" "off" (**) fglrx(0): Option "VideoOverlay" "on" (**) fglrx(0): Option "DesktopSetup" "0x00000000" (**) fglrx(0): Option "MonitorLayout" "AUTO, AUTO" (**) fglrx(0): Option "HSync2" "unspecified" (**) fglrx(0): Option "VRefresh2" "unspecified" (**) fglrx(0): Option "ScreenOverlap" "0" (**) fglrx(0): Option "IgnoreEDID" "off" (**) fglrx(0): Option "UseInternalAGPGART" "yes" (**) fglrx(0): Option "Stereo" "off" (**) fglrx(0): Option "StereoSyncEnable" "1" (**) fglrx(0): Option "UseFastTLS" "0" (**) fglrx(0): Option "BlockSignalsOnLock" "on" (**) fglrx(0): Option "ForceGenericCPU" "no" (**) fglrx(0): Option "CenterMode" "off" (**) fglrx(0): Option "FSAAScale" "1" (**) fglrx(0): Option "FSAAEnable" "no" (**) fglrx(0): Option "FSAADisableGamma" "no" (**) fglrx(0): Option "FSAACustomizeMSPos" "no" (**) fglrx(0): Option "FSAAMSPosX0" "0.000000" (**) fglrx(0): Option "FSAAMSPosY0" "0.000000" (**) fglrx(0): Option "FSAAMSPosX1" "0.000000" (**) fglrx(0): Option "FSAAMSPosY1" "0.000000" (**) fglrx(0): Option "FSAAMSPosX2" "0.000000" (**) fglrx(0): Option "FSAAMSPosY2" "0.000000" (**) fglrx(0): Option "FSAAMSPosX3" "0.000000" (**) fglrx(0): Option "FSAAMSPosY3" "0.000000" (**) fglrx(0): Option "FSAAMSPosX4" "0.000000" (**) fglrx(0): Option "FSAAMSPosY4" "0.000000" (**) fglrx(0): Option "FSAAMSPosX5" "0.000000" (**) fglrx(0): Option "FSAAMSPosY5" "0.000000" (**) fglrx(0): Option "NoTV" "yes" (**) fglrx(0): Option "TVStandard" "NTSC-M" (**) fglrx(0): Option "TVHSizeAdj" "0" (**) fglrx(0): Option "TVVSizeAdj" "0" (**) fglrx(0): Option "TVHPosAdj" "0" (**) fglrx(0): Option "TVVPosAdj" "0" (**) fglrx(0): Option "TVHStartAdj" "0" (**) fglrx(0): Option "TVColorAdj" "0" (**) fglrx(0): Option "PseudoColorVisuals" "off" (**) fglrx(0): Qbs disabled (==) fglrx(0): RGB weight 888 (II) fglrx(0): Using 8 bits per RGB (8 bit DAC) (**) fglrx(0): Gamma Correction for I is 0x00000000 (**) fglrx(0): Gamma Correction for II is 0x00000000 (==) fglrx(0): Buffer Tiling is ON (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Loading /usr/X11R6/lib/modules/linux/libint10.a (II) Module int10: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 ABI class: X.Org Video Driver, version 0.7 (II) fglrx(0): initializing int10 (II) fglrx(0): Primary V_BIOS segment is: 0xc000 (**) fglrx(0): Option "mtrr" "off" (--) fglrx(0): Chipset: "RADEON 9600 PRO (RV360 4152)" (Chipset = 0x4152) (--) fglrx(0): (PciSubVendor = 0x1681, PciSubDevice = 0x0002) (--) fglrx(0): board vendor info: third party grafics adapter - NOT original ATI (--) fglrx(0): Linear framebuffer (phys) at 0xb0000000 (--) fglrx(0): MMIO registers at 0xcfef0000 (--) fglrx(0): ROM-BIOS at 0xcfec0000 (--) fglrx(0): ChipExtRevID = 0x00 (--) fglrx(0): ChipIntRevID = 0x0C (--) fglrx(0): VideoRAM: 131072 kByte (64-bit SDR SDRAM) (WW) fglrx(0): board is an unknown third party board, chipset is supported (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Loading /usr/X11R6/lib/modules/libddc.a (II) Module ddc: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 ABI class: X.Org Video Driver, version 0.7 (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Loading /usr/X11R6/lib/modules/libi2c.a (II) Module i2c: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.2.0 ABI class: X.Org Video Driver, version 0.7 (II) fglrx(0): I2C bus "DDC" initialized. (II) fglrx(0): Connector Layout from BIOS -------- (II) fglrx(0): Connector1: DDCType-3, DACType-0, TMDSType--1, ConnectorType-2 (II) fglrx(0): Connector0: DDCType-2, DACType-1, TMDSType-0, ConnectorType-3 (**) fglrx(0): MonitorLayout Option: Monitor1--Type AUTO, Monitor2--Type AUTO (II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0. (II) fglrx(0): I2C device "DDC:ddc2" removed. (II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0. (II) fglrx(0): I2C device "DDC:ddc2" removed. (II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0. (II) fglrx(0): I2C device "DDC:ddc2" removed. (II) fglrx(0): DDC detected on DDCType 2 with Monitor Type 0 (II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0. (II) fglrx(0): I2C device "DDC:ddc2" removed. (II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0. (II) fglrx(0): I2C device "DDC:ddc2" removed. (II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0. (II) fglrx(0): I2C device "DDC:ddc2" removed. (II) fglrx(0): DDC detected on DDCType 3 with Monitor Type 0 (II) fglrx(0): Primary head: Monitor -- NONE Connector -- DVI-I DAC Type -- TVDAC/ExtDAC TMDS Type -- Internal DDC Type -- DVI_DDC (II) fglrx(0): Secondary head: Monitor -- CRT Connector -- VGA DAC Type -- Primary TMDS Type -- NONE DDC Type -- VGA_DDC (II) fglrx(0): (II) fglrx(0): DesktopSetup 0x0000 (**) fglrx(0): PseudoColor visuals disabled (**) fglrx(0): Overlay disabled (**) fglrx(0): Overlay disabled (II) fglrx(0): PLL parameters: rf=2700 rd=12 min=20000 max=40000 (==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0) (**) fglrx(0): Center Mode is disabled (==) fglrx(0): TMDS coherent mode is enabled (II) fglrx(0): Monitor0: Using hsync range of 31.50-80.50 kHz (II) fglrx(0): Monitor0: Using vrefresh range of 20.00-60.00 Hz (II) fglrx(0): Clock range: 20.00 to 400.00 MHz (II) fglrx(0): Not using default mode "640x350" (vrefresh out of range) (II) fglrx(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan) (II) fglrx(0): Not using default mode "640x400" (vrefresh out of range) (II) fglrx(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan) (II) fglrx(0): Not using default mode "720x400" (vrefresh out of range) (II) fglrx(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan) (II) fglrx(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) fglrx(0): Not using default mode "640x480" (vrefresh out of range) (II) fglrx(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) fglrx(0): Not using default mode "640x480" (vrefresh out of range) (II) fglrx(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) fglrx(0): Not using default mode "640x480" (vrefresh out of range) (II) fglrx(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) fglrx(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) fglrx(0): Not using default mode "800x600" (vrefresh out of range) (II) fglrx(0): Not using default mode "400x300" (vrefresh out of range) (II) fglrx(0): Not using default mode "800x600" (vrefresh out of range) (II) fglrx(0): Not using default mode "400x300" (vrefresh out of range) (II) fglrx(0): Not using default mode "800x600" (vrefresh out of range) (II) fglrx(0): Not using default mode "400x300" (vrefresh out of range) (II) fglrx(0): Not using default mode "1024x768" (vrefresh out of range) (II) fglrx(0): Not using default mode "512x384" (vrefresh out of range) (II) fglrx(0): Not using default mode "1024x768" (vrefresh out of range) (II) fglrx(0): Not using default mode "512x384" (vrefresh out of range) (II) fglrx(0): Not using default mode "1024x768" (vrefresh out of range) (II) fglrx(0): Not using default mode "512x384" (vrefresh out of range) (II) fglrx(0): Not using default mode "1024x768" (vrefresh out of range) (II) fglrx(0): Not using default mode "512x384" (vrefresh out of range) (II) fglrx(0): Not using default mode "1152x864" (vrefresh out of range) (II) fglrx(0): Not using default mode "576x432" (vrefresh out of range) (II) fglrx(0): Not using default mode "1280x960" (hsync out of range) (II) fglrx(0): Not using default mode "640x480" (hsync out of range) (II) fglrx(0): Not using default mode "1280x1024" (vrefresh out of range) (II) fglrx(0): Not using default mode "640x512" (vrefresh out of range) (II) fglrx(0): Not using default mode "1280x1024" (hsync out of range) (II) fglrx(0): Not using default mode "640x512" (hsync out of range) (II) fglrx(0): Not using default mode "1600x1200" (width too large for virtual size) (II) fglrx(0): Not using default mode "1600x1200" (width too large for virtual size) (II) fglrx(0): Not using default mode "800x600" (vrefresh out of range) (II) fglrx(0): Not using default mode "1600x1200" (width too large for virtual size) (II) fglrx(0): Not using default mode "800x600" (hsync out of range) (II) fglrx(0): Not using default mode "1600x1200" (width too large for virtual size) (II) fglrx(0): Not using default mode "800x600" (hsync out of range) (II) fglrx(0): Not using default mode "1600x1200" (width too large for virtual size) (II) fglrx(0): Not using default mode "800x600" (hsync out of range) (II) fglrx(0): Not using default mode "1792x1344" (width too large for virtual size) (II) fglrx(0): Not using default mode "896x672" (hsync out of range) (II) fglrx(0): Not using default mode "1792x1344" (width too large for virtual size) (II) fglrx(0): Not using default mode "896x672" (hsync out of range) (II) fglrx(0): Not using default mode "1856x1392" (width too large for virtual size) (II) fglrx(0): Not using default mode "928x696" (hsync out of range) (II) fglrx(0): Not using default mode "1856x1392" (width too large for virtual size) (II) fglrx(0): Not using default mode "928x696" (hsync out of range) (II) fglrx(0): Not using default mode "1920x1440" (width too large for virtual size) (II) fglrx(0): Not using default mode "960x720" (hsync out of range) (II) fglrx(0): Not using default mode "1920x1440" (width too large for virtual size) (II) fglrx(0): Not using default mode "960x720" (hsync out of range) (II) fglrx(0): Not using default mode "832x624" (vrefresh out of range) (II) fglrx(0): Not using default mode "416x312" (vrefresh out of range) (II) fglrx(0): Not using default mode "1400x1050" (width too large for virtual size) (II) fglrx(0): Not using default mode "1400x1050" (width too large for virtual size) (II) fglrx(0): Not using default mode "700x525" (hsync out of range) (II) fglrx(0): Not using default mode "1600x1024" (width too large for virtual size) (II) fglrx(0): Not using default mode "1920x1440" (width too large for virtual size) (II) fglrx(0): Not using default mode "960x720" (hsync out of range) (II) fglrx(0): Not using default mode "2048x1536" (width too large for virtual size) (II) fglrx(0): Not using default mode "1024x768" (hsync out of range) (II) fglrx(0): Not using default mode "2048x1536" (width too large for virtual size) (II) fglrx(0): Not using default mode "1024x768" (hsync out of range) (II) fglrx(0): Not using default mode "2048x1536" (width too large for virtual size) (II) fglrx(0): Not using default mode "1024x768" (hsync out of range) (**) fglrx(0): Virtual size is 1280x1024 (pitch 1280) (**) fglrx(0): *Default mode "1280x1024": 108.0 MHz (scaled from -137583.6 MHz), 64.0 kHz, 60.0 Hz (II) fglrx(0): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (**) fglrx(0): *Default mode "1280x960": 108.0 MHz (scaled from -137583.6 MHz), 60.0 kHz, 60.0 Hz (II) fglrx(0): Modeline "1280x960" 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (**) fglrx(0): *Default mode "1152x768": 65.0 MHz (scaled from -1041411.4 MHz), 44.2 kHz, 54.8 Hz (II) fglrx(0): Modeline "1152x768" 65.00 1152 1178 1314 1472 768 771 777 806 +hsync +vsync (**) fglrx(0): *Default mode "1024x768": 65.0 MHz (scaled from -361182.5 MHz), 48.4 kHz, 60.0 Hz (II) fglrx(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (**) fglrx(0): *Default mode "800x600": 40.0 MHz (scaled from 108116.0 MHz), 37.9 kHz, 60.3 Hz (II) fglrx(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (**) fglrx(0): *Default mode "800x600": 81.0 MHz (scaled from -1176929.5 MHz), 75.0 kHz, 60.0 Hz (D) (II) fglrx(0): Modeline "800x600" 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (**) fglrx(0): *Default mode "800x600": 36.0 MHz (scaled from 1385794.6 MHz), 35.2 kHz, 56.2 Hz (II) fglrx(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (**) fglrx(0): *Default mode "700x525": 61.0 MHz (scaled from 916496.1 MHz), 64.9 kHz, 60.0 Hz (D) (II) fglrx(0): Modeline "700x525" 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (**) fglrx(0): *Default mode "640x512": 54.0 MHz (scaled from 2078691.8 MHz), 64.0 kHz, 60.0 Hz (D) (II) fglrx(0): Modeline "640x512" 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (**) fglrx(0): *Default mode "640x480": 25.2 MHz (scaled from 970056.2 MHz), 31.5 kHz, 60.0 Hz (II) fglrx(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (**) fglrx(0): *Default mode "640x480": 54.0 MHz (scaled from 2078691.8 MHz), 60.0 kHz, 60.0 Hz (D) (II) fglrx(0): Modeline "640x480" 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (**) fglrx(0): *Default mode "576x384": 32.5 MHz (scaled from 1558755.0 MHz), 44.2 kHz, 54.8 Hz (D) (II) fglrx(0): Modeline "576x384" 32.50 576 589 657 736 384 385 388 403 doublescan +hsync +vsync (**) fglrx(0): *Default mode "512x384": 32.5 MHz (scaled from 1966892.4 MHz), 48.4 kHz, 60.0 Hz (D) (II) fglrx(0): Modeline "512x384" 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (**) fglrx(0): *Default mode "400x300": 20.0 MHz (scaled from -2093425.7 MHz), 37.9 kHz, 60.3 Hz (D) (II) fglrx(0): Modeline "400x300" 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (==) fglrx(0): DPI set to (75, 75) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/X11R6/lib/modules/libfb.a (II) Module fb: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.2 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Loading /usr/X11R6/lib/modules/libramdac.a (II) Module ramdac: vendor="X.Org Foundation" compiled for 6.8.2, module version = 0.1.0 ABI class: X.Org Video Driver, version 0.7 (**) fglrx(0): NoAccel = NO (II) Loading sub module "xaa" (II) LoadModule: "xaa" (II) Loading /usr/X11R6/lib/modules/libxaa.a (II) Module xaa: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.2.0 ABI class: X.Org Video Driver, version 0.7 (==) fglrx(0): HPV inactive (==) fglrx(0): FSAA enabled: NO (**) fglrx(0): FSAA Gamma enabled (**) fglrx(0): FSAA Multisample Position is fix (**) fglrx(0): NoDRI = NO (II) Loading sub module "fglrxdrm" (II) LoadModule: "fglrxdrm" (II) Loading /usr/X11R6/lib/modules/linux/libfglrxdrm.a (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc." compiled for 4.3.99.902, module version = 8.10.19 ABI class: X.Org Server Extension, version 0.2 (II) fglrx(0): Depth moves disabled by default (**) fglrx(0): Capabilities: 0x00000000 (**) fglrx(0): cpuFlags: 0x4000000f (**) fglrx(0): cpuSpeedMHz: 0x00000862 (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so" (**) fglrx(0): using built in AGPGART module: yes (**) fglrx(0): UseFastTLS=0 (**) fglrx(0): BlockSignalsOnLock=1 (==) fglrx(0): EnablePrivateBackZ = NO (--) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] 0 0 0xcfef0000 - 0xcfefffff (0x10000) MX[B] [1] 0 0 0xb0000000 - 0xbfffffff (0x10000000) MX[B] [2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [7] -1 0 0xcffe0000 - 0xcffeffff (0x10000) MX[B] [8] -1 0 0xcfffc000 - 0xcfffcfff (0x1000) MX[B] [9] -1 0 0xcffff000 - 0xcfffffff (0x1000) MX[B] [10] -1 0 0xcfffe000 - 0xcfffefff (0x1000) MX[B] [11] -1 0 0xcfffd000 - 0xcfffdfff (0x1000) MX[B] [12] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O [13] -1 0 0xcfee0000 - 0xcfeeffff (0x10000) MX[B](B) [14] -1 0 0xa0000000 - 0xafffffff (0x10000000) MX[B](B) [15] -1 0 0xcfec0000 - 0xcfedffff (0x20000) MX[B](B) [16] -1 0 0xcfef0000 - 0xcfefffff (0x10000) MX[B](B) [17] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[B](B) [18] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [19] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [20] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [21] 0 0 0x0000a800 - 0x0000a8ff (0x100) IX[B] [22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [23] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [24] -1 0 0x0000d000 - 0x0000d007 (0x8) IX[B] [25] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B] [26] -1 0 0x0000d800 - 0x0000d87f (0x80) IX[B] [27] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B] [28] -1 0 0x0000ff00 - 0x0000ff0f (0x10) IX[B] [29] -1 0 0x00000c00 - 0x00000c1f (0x20) IX[B] [30] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B](B) [31] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [32] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (WW) fglrx(0): Cannot read colourmap from VGA. Will restore with default (II) fglrx(0): UMM area: 0xb0701000 (size=0x078ff000) (II) fglrx(0): driver needs XFree86 version: 4.3.x (WW) fglrx(0): could not detect XFree86 version (query_status=-3) (II) Loading extension ATIFGLRXDRI (II) fglrx(0): doing DRIScreenInit drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 8, (OK) drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 8, (OK) drmOpenByBusid: Searching for BusID PCI:1:0:0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 8, (OK) drmOpenByBusid: drmOpenMinor returns 8 drmOpenByBusid: drmGetBusid reports drmOpenDevice: node name is /dev/dri/card1 drmOpenDevice: open result is -1, (No such device) drmOpenDevice: open result is -1, (No such device) drmOpenDevice: Open failed drmOpenByBusid: drmOpenMinor returns -1023 drmOpenDevice: node name is /dev/dri/card2 drmOpenDevice: open result is -1, (No such device) drmOpenDevice: open result is -1, (No such device) drmOpenDevice: Open failed drmOpenByBusid: drmOpenMinor returns -1023 drmOpenDevice: node name is /dev/dri/card3 drmOpenDevice: open result is -1, (No such device) drmOpenDevice: open result is -1, (No such device) drmOpenDevice: Open failed drmOpenByBusid: drmOpenMinor returns -1023 drmOpenDevice: node name is /dev/dri/card4 drmOpenDevice: open result is -1, (No such device) drmOpenDevice: open result is -1, (No such device) drmOpenDevice: Open failed drmOpenByBusid: drmOpenMinor returns -1023 drmOpenDevice: node name is /dev/dri/card5 drmOpenDevice: open result is -1, (No such device) drmOpenDevice: open result is -1, (No such device) drmOpenDevice: Open failed drmOpenByBusid: drmOpenMinor returns -1023 drmOpenDevice: node name is /dev/dri/card6 drmOpenDevice: open result is -1, (No such device) drmOpenDevice: open result is -1, (No such device) drmOpenDevice: Open failed drmOpenByBusid: drmOpenMinor returns -1023 drmOpenDevice: node name is /dev/dri/card7 drmOpenDevice: open result is -1, (No such device) drmOpenDevice: open result is -1, (No such device) drmOpenDevice: Open failed drmOpenByBusid: drmOpenMinor returns -1023 drmOpenDevice: node name is /dev/dri/card8 drmOpenDevice: open result is -1, (No such device) drmOpenDevice: open result is -1, (No such device) drmOpenDevice: Open failed drmOpenByBusid: drmOpenMinor returns -1023 drmOpenDevice: node name is /dev/dri/card9 drmOpenDevice: open result is -1, (No such device) drmOpenDevice: open result is -1, (No such device) drmOpenDevice: Open failed drmOpenByBusid: drmOpenMinor returns -1023 drmOpenDevice: node name is /dev/dri/card10 drmOpenDevice: open result is -1, (No such device) drmOpenDevice: open result is -1, (No such device) drmOpenDevice: Open failed drmOpenByBusid: drmOpenMinor returns -1023 drmOpenDevice: node name is /dev/dri/card11 drmOpenDevice: open result is -1, (No such device) drmOpenDevice: open result is -1, (No such device) drmOpenDevice: Open failed drmOpenByBusid: drmOpenMinor returns -1023 drmOpenDevice: node name is /dev/dri/card12 drmOpenDevice: open result is -1, (No such device) drmOpenDevice: open result is -1, (No such device) drmOpenDevice: Open failed drmOpenByBusid: drmOpenMinor returns -1023 drmOpenDevice: node name is /dev/dri/card13 drmOpenDevice: open result is -1, (No such device) drmOpenDevice: open result is -1, (No such device) drmOpenDevice: Open failed drmOpenByBusid: drmOpenMinor returns -1023 drmOpenDevice: node name is /dev/dri/card14 drmOpenDevice: open result is -1, (No such device) drmOpenDevice: open result is -1, (No such device) drmOpenDevice: Open failed drmOpenByBusid: drmOpenMinor returns -1023 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 8, (OK) drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 8, (OK) drmGetBusid returned '' (II) fglrx(0): [drm] DRM interface version 1.0 (II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0" (II) fglrx(0): [drm] added 8192 byte SAREA at 0xe0b02000 (II) fglrx(0): [drm] mapped SAREA 0xe0b02000 to 0x402e5000 (II) fglrx(0): [drm] framebuffer handle = 0xb0000000 (II) fglrx(0): [drm] added 1 reserved context for kernel (II) fglrx(0): DRIScreenInit done (II) fglrx(0): Kernel Module Version Information: (II) fglrx(0): Name: fglrx (II) fglrx(0): Version: 3.14.1 (II) fglrx(0): Date: Sep 27 2004 (II) fglrx(0): Desc: ATI Fire GL DRM kernel module (WW) fglrx(0): Kernel Module version does *not* match driver. (EE) fglrx(0): incompatible kernel module detected - HW accelerated OpenGL will not work (II) fglrx(0): [drm] removed 1 reserved context for kernel (II) fglrx(0): [drm] unmapping 8192 bytes of SAREA 0xe0b02000 at 0x402e5000 (WW) fglrx(0): *********************************************** (WW) fglrx(0): * DRI initialization failed! * (WW) fglrx(0): * (maybe driver kernel module missing or bad) * (WW) fglrx(0): * 2D acceleraton available (MMIO) * (WW) fglrx(0): * no 3D acceleration available * (WW) fglrx(0): ********************************************* * (II) fglrx(0): FBADPhys: 0xb0000000 FBMappedSize: 0x08000000 (II) fglrx(0): FBMM initialized for area (0,0)-(1280,8191) (II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,1024) (front color buffer - assumption) (==) fglrx(0): Backing store disabled (==) fglrx(0): Silken mouse enabled (II) fglrx(0): Using hardware cursor (scanline 1024) (II) fglrx(0): Largest offscreen area available: 1280 x 7163 (**) Option "dpms" (**) fglrx(0): DPMS enabled (II) fglrx(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles Solid Horizontal and Vertical Lines Offscreen Pixmaps Setting up tile and stipple cache: 32 128x128 slots 32 256x256 slots 16 512x512 slots (II) fglrx(0): Acceleration enabled (II) fglrx(0): Direct rendering disabled (**) fglrx(0): Video overlay enabled on CRTC1 (II) Loading extension FGLRXEXTENSION (II) Loading extension ATITVOUT (==) RandR enabled (II) Setting vga for screen 0. (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension LBX (II) Initializing built-in extension XC-APPGROUP (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension XFree86-Bigfont (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) Initializing built-in extension XEVIE (**) Option "Protocol" "ImPS/2" (**) Mouse1: Device: "/dev/input/mice" (**) Mouse1: Protocol: "ImPS/2" (**) Option "CorePointer" (**) Mouse1: Core Pointer (**) Option "Device" "/dev/input/mice" (==) Mouse1: Emulate3Buttons, Emulate3Timeout: 50 (**) Option "ZAxisMapping" "4 5" (**) Mouse1: ZAxisMapping: buttons 4 and 5 (**) Mouse1: Buttons: 5 (**) Option "CoreKeyboard" (**) Keyboard1: Core Keyboard (**) Option "Protocol" "standard" (**) Keyboard1: Protocol: standard (**) Option "AutoRepeat" "500 30" (**) Option "XkbRules" "xfree86" (**) Keyboard1: XkbRules: "xfree86" (**) Option "XkbModel" "pc101" (**) Keyboard1: XkbModel: "pc101" (**) Option "XkbLayout" "us" (**) Keyboard1: XkbLayout: "us" (**) Option "CustomKeycodes" "off" (**) Keyboard1: CustomKeycodes disabled (II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD) (II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE) (II) Mouse1: ps2EnableDataReporting: succeeded Could not init font path element /usr/X11R6/lib/X11/fonts/Speedo/, removing from list! SetClientVersion: 0 8 Really havent a clue why its not working or even about linux in general. Device was woking before upgrade with whatever defaults mandrake 10.1 gave it (With just enough 3d hardware acc to run UT2004), now not supporting hardware (or 3d) acc. Not even Tux racer will work:/ Quote Link to comment Share on other sites More sharing options...
Guest Lysit Posted March 9, 2005 Report Share Posted March 9, 2005 My x.org config file # File: xorg.conf # File generated by fglrxconfig (C) ATI Research, a substitute for xf86config. # Note by ATI: the below copyright notice is there for servicing possibly # pending third party rights on the file format and the instance of this file. # # Copyright (c) 1999 by The XFree86 Project, Inc. # # Permission is hereby granted, free of charge, to any person obtaining a # copy of this software and associated documentation files (the "Software"), # to deal in the Software without restriction, including without limitation # the rights to use, copy, modify, merge, publish, distribute, sublicense, # and/or sell copies of the Software, and to permit persons to whom the # Software is furnished to do so, subject to the following conditions: # # The above copyright notice and this permission notice shall be included in # all copies or substantial portions of the Software. # # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL # THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE # SOFTWARE. # # Except as contained in this notice, the name of the XFree86 Project shall # not be used in advertising or otherwise to promote the sale, use or other # dealings in this Software without prior written authorization from the # XFree86 Project. # # ********************************************************************** # Refer to the XF86Config(4/5) man page for details about the format of # this file. # ********************************************************************** # ********************************************************************** # DRI Section # ********************************************************************** Section "dri" # Access to OpenGL ICD is allowed for all users: Mode 0666 # Access to OpenGL ICD is restricted to a specific user group: # Group 100 # users # Mode 0660 EndSection # ********************************************************************** # Module section -- this section is used to specify # which dynamically loadable modules to load. # ********************************************************************** # Section "Module" # This loads the DBE extension module. Load "dbe" # Double buffer extension # This loads the Type1 and FreeType font modules Load "type1" Load "freetype" # This loads the GLX module Load "glx" # libglx.a Load "dri" # libdri.a # This loads the miscellaneous extensions module, and disables # initialisation of the XFree86-DGA extension within that module. Subsection "extmod" Option "omit xfree86-dga" # don't initialise the DGA extension EndSubsection EndSection # ********************************************************************** # Files section. This allows default font and rgb paths to be set # ********************************************************************** Section "Files" # The location of the RGB database. Note, this is the name of the # file minus the extension (like ".txt" or ".db"). There is normally # no need to change the default. RgbPath "/usr/X11R6/lib/X11/rgb" # Multiple FontPath entries are allowed (which are concatenated together), # as well as specifying multiple comma-separated entries in one FontPath # command (or a combination of both methods) # # If you don't have a floating point coprocessor and emacs, Mosaic or other # programs take long to start up, try moving the Type1 and Speedo directory # to the end of this list (or comment them out). # # FontPath "/usr/X11R6/lib/X11/fonts/local/" FontPath "/usr/X11R6/lib/X11/fonts/misc/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" # FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/Type1/" FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" # FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" # The module search path. The default path is shown here. # ModulePath "/usr/X11R6/lib/modules" EndSection # ********************************************************************** # Server flags section. # ********************************************************************** Section "ServerFlags" EndSection # Uncomment this to cause a core dump at the spot where a signal is # received. This may leave the console in an unusable state, but may # provide a better stack trace in the core dump to aid in debugging # Option "NoTrapSignals" # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence # This allows clients to receive this key event. # Option "DontZap" # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching # sequences. This allows clients to receive these key events. # Option "Dont Zoom" # Uncomment this to disable tuning with the xvidtune client. With # it the client can still run and fetch card and monitor attributes, # but it will not be allowed to change them. If it tries it will # receive a protocol error. # Option "DisableVidModeExtension" # Uncomment this to enable the use of a non-local xvidtune client. # Option "AllowNonLocalXvidtune" # Uncomment this to disable dynamically modifying the input device # (mouse and keyboard) settings. # Option "DisableModInDev" # Uncomment this to enable the use of a non-local client to # change the keyboard or mouse settings (currently only xset). # Option "AllowNonLocalModInDev" # ********************************************************************** # Input devices # ********************************************************************** # ********************************************************************** # Core keyboard's InputDevice section # ********************************************************************** Section "InputDevice" Identifier "Keyboard1" Driver "kbd" Option "XkbModel" "pc101" Option "XkbLayout" "us" # For most OSs the protocol can be omitted (it defaults to "Standard"). # When using XQUEUE (only for SVR3 and SVR4, but not Solaris), # uncomment the following line. # Option "Protocol" "Xqueue" Option "AutoRepeat" "500 30" # Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) # Option "Xleds" "1 2 3" # Option "LeftAlt" "Meta" # Option "RightAlt" "ModeShift" # To customise the XKB settings to suit your keyboard, modify the # lines below (which are the defaults). For example, for a non-U.S. # keyboard, you will probably want to use: # Option "XkbModel" "pc102" # If you have a US Microsoft Natural keyboard, you can use: # Option "XkbModel" "microsoft" # # Then to change the language, change the Layout setting. # For example, a german layout can be obtained with: # Option "XkbLayout" "de" # or: # Option "XkbLayout" "de" # Option "XkbVariant" "nodeadkeys" # # If you'd like to switch the positions of your capslock and # control keys, use: # Option "XkbOptions" "ctrl:swapcaps" # These are the default XKB settings for XFree86 # Option "XkbRules" "xfree86" # Option "XkbModel" "pc101" # Option "XkbLayout" "us" # Option "XkbVariant" "" # Option "XkbOptions" "" # Option "XkbDisable" Option "XkbRules" "xfree86" EndSection # ********************************************************************** # Core Pointer's InputDevice section # ********************************************************************** Section "InputDevice" # Identifier and driver Identifier "Mouse1" Driver "mouse" Option "Protocol" "ImPS/2" Option "Device" "/dev/input/mice" # When using XQUEUE, comment out the above two lines, and uncomment # the following line. # Option "Protocol" "Xqueue" # Baudrate and SampleRate are only for some Logitech mice. In # almost every case these lines should be omitted. # Option "BaudRate" "9600" # Option "SampleRate" "150" # Emulate3Buttons is an option for 2-button Microsoft mice # Emulate3Timeout is the timeout in milliseconds (default is 50ms) # Option "Emulate3Buttons" # Option "Emulate3Timeout" "50" # ChordMiddle is an option for some 3-button Logitech mice # Option "ChordMiddle" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" Identifier "Keyboard1" Driver "keyboard" Option "XkbModel" "pc105" Option "XkbLayout" "gb" Option "XkbOptions" "" EndSection # ********************************************************************** # Other input device sections # this is optional and is required only if you # are using extended input devices. This is for example only. Refer # to the XF86Config man page for a description of the options. # ********************************************************************** # # Section "InputDevice" # Identifier "Mouse2" # Driver "mouse" # Option "Protocol" "MouseMan" # Option "Device" "/dev/mouse2" # EndSection # # Section "InputDevice" # Identifier "spaceball" # Driver "magellan" # Option "Device" "/dev/cua0" # EndSection # # Section "InputDevice" # Identifier "spaceball2" # Driver "spaceorb" # Option "Device" "/dev/cua0" # EndSection # # Section "InputDevice" # Identifier "touchscreen0" # Driver "microtouch" # Option "Device" "/dev/ttyS0" # Option "MinX" "1412" # Option "MaxX" "15184" # Option "MinY" "15372" # Option "MaxY" "1230" # Option "ScreenNumber" "0" # Option "ReportingMode" "Scaled" # Option "ButtonNumber" "1" # Option "SendCoreEvents" # EndSection # # Section "InputDevice" # Identifier "touchscreen1" # Driver "elo2300" # Option "Device" "/dev/ttyS0" # Option "MinX" "231" # Option "MaxX" "3868" # Option "MinY" "3858" # Option "MaxY" "272" # Option "ScreenNumber" "0" # Option "ReportingMode" "Scaled" # Option "ButtonThreshold" "17" # Option "ButtonNumber" "1" # Option "SendCoreEvents" # EndSection # ********************************************************************** # Monitor section # ********************************************************************** # Any number of monitor sections may be present Section "Monitor" Identifier "Monitor0" HorizSync 31.5 - 80.5 VertRefresh 20 - 60 Option "DPMS" # === mode lines based on GTF === # VGA @ 100Hz # Modeline "640x480@100" 43.163 640 680 744 848 480 481 484 509 +hsync +vsync # SVGA @ 100Hz # Modeline "800x600@100" 68.179 800 848 936 1072 600 601 604 636 +hsync +vsync # XVGA @ 100Hz # Modeline "1024x768@100" 113.309 1024 1096 1208 1392 768 769 772 814 +hsync +vsync # 1152x864 @ 60Hz # Modeline "1152x864@60" 81.642 1152 1216 1336 1520 864 865 868 895 +hsync +vsync # 1152x864 @ 85Hz # Modeline "1152x864@85" 119.651 1152 1224 1352 1552 864 865 868 907 +hsync +vsync # 1152x864 @ 100Hz # Modeline "1152x864@100" 143.472 1152 1232 1360 1568 864 865 868 915 +hsync +vsync # 1280x960 @ 75Hz # Modeline "1280x960@75" 129.859 1280 1368 1504 1728 960 961 964 1002 +hsync +vsync # 1280x960 @ 100Hz # Modeline "1280x960@100" 178.992 1280 1376 1520 1760 960 961 964 1017 +hsync +vsync # SXGA @ 100Hz # Modeline "1280x1024@100" 190.960 1280 1376 1520 1760 1024 1025 1028 1085 +hsync +vsync # SPEA GDM-1950 (60Hz,64kHz,110MHz,-,-): 1280x1024 @ V-freq: 60.00 Hz, H-freq: 63.73 KHz # Modeline "GDM-1950" 109.62 1280 1336 1472 1720 1024 1024 1026 1062 -hsync -vsync # 1600x1000 @ 60Hz # Modeline "1600x1000" 133.142 1600 1704 1872 2144 1000 1001 1004 1035 +hsync +vsync # 1600x1000 @ 75Hz # Modeline "1600x1000" 169.128 1600 1704 1880 2160 1000 1001 1004 1044 +hsync +vsync # 1600x1000 @ 85Hz # Modeline "1600x1000" 194.202 1600 1712 1888 2176 1000 1001 1004 1050 +hsync +vsync # 1600x1000 @ 100Hz # Modeline "1600x1000" 232.133 1600 1720 1896 2192 1000 1001 1004 1059 +hsync +vsync # 1600x1024 @ 60Hz # Modeline "1600x1024" 136.385 1600 1704 1872 2144 1024 1027 1030 1060 +hsync +vsync # 1600x1024 @ 75Hz # Modeline "1600x1024" 174.416 1600 1712 1888 2176 1024 1025 1028 1069 +hsync +vsync # 1600x1024 @ 76Hz # Modeline "1600x1024" 170.450 1600 1632 1792 2096 1024 1027 1030 1070 +hsync +vsync # 1600x1024 @ 85Hz # Modeline "1600x1024" 198.832 1600 1712 1888 2176 1024 1027 1030 1075 +hsync +vsync # 1920x1080 @ 60Hz # Modeline "1920x1080" 172.798 1920 2040 2248 2576 1080 1081 1084 1118 -hsync -vsync # 1920x1080 @ 75Hz # Modeline "1920x1080" 211.436 1920 2056 2264 2608 1080 1081 1084 1126 +hsync +vsync # 1920x1200 @ 60Hz # Modeline "1920x1200" 193.156 1920 2048 2256 2592 1200 1201 1203 1242 +hsync +vsync # 1920x1200 @ 75Hz # Modeline "1920x1200" 246.590 1920 2064 2272 2624 1200 1201 1203 1253 +hsync +vsync # 2048x1536 @ 60 # Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync # 2048x1536 @ 60 # Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync # 1400x1050 @ 60Hz M9 Laptop mode # ModeLine "1400x1050" 122.000 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync # 1920x2400 @ 25Hz for IBM T221, VS VP2290 and compatible display devices # Modeline "1920x2400@25" 124.620 1920 1928 1980 2048 2400 2401 2403 2434 +hsync +vsync # 1920x2400 @ 30Hz for IBM T221, VS VP2290 and compatible display devices # Modeline "1920x2400@30" 149.250 1920 1928 1982 2044 2400 2402 2404 2434 +hsync +vsync EndSection # ********************************************************************** # Graphics device section # ********************************************************************** # Any number of graphics device sections may be present # Standard VGA Device: Section "Device" Identifier "Standard VGA" VendorName "Unknown" BoardName "Unknown" # The chipset line is optional in most cases. It can be used to override # the driver's chipset detection, and should not normally be specified. # Chipset "generic" # The Driver line must be present. When using run-time loadable driver # modules, this line instructs the server to load the specified driver # module. Even when not using loadable driver modules, this line # indicates which driver should interpret the information in this section. Driver "vga" # The BusID line is used to specify which of possibly multiple devices # this section is intended for. When this line isn't present, a device # section can only match up with the primary video device. For PCI # devices a line like the following could be used. This line should not # normally be included unless there is more than one video device # installed. # BusID "PCI:0:10:0" # VideoRam 256 # Clocks 25.2 28.3 EndSection # === ATI device section === Section "Device" Identifier "ATI Graphics Adapter" Driver "fglrx" Screen 0 BusID "PCI:1:0:0" # vendor=1002, device=4152 Option "FSAAMSPosY1" "0.000000" Option "StereoSyncEnable" "1" # ### generic DRI settings ### # === disable PnP Monitor === #Option "NoDDC" Option "FSAAMSPosX5" "0.000000" Option "FSAAMSPosX2" "0.000000" Option "FSAAMSPosY4" "0.000000" # === Pseudo Color Visuals (8-bit visuals) === Option "PseudoColorVisuals" "off" Option "FSAAMSPosX4" "0.000000" Option "FSAAMSPosY0" "0.000000" Option "FSAADisableGamma" "no" # === Video Overlay for the Xv extension === Option "VideoOverlay" "on" Option "GammaCorrectionII" "0x00000000" Option "ForceGenericCPU" "no" # === misc DRI settings === Option "mtrr" "off" # disable DRI mtrr mapper, driver has its own code for mtrr Option "VRefresh2" "unspecified" # === Center Mode (Laptops only) === Option "CenterMode" "off" Option "FSAAMSPosY5" "0.000000" Option "IgnoreEDID" "off" # === OpenGL Overlay === # Note: When OpenGL Overlay is enabled, Video Overlay # will be disabled automatically Option "OpenGLOverlay" "off" Option "FSAACustomizeMSPos" "no" Option "FSAAScale" "1" # ### FireGL DDX driver module specific settings ### # === Screen Management === Option "DesktopSetup" "0x00000000" Option "HSync2" "unspecified" Option "TVHStartAdj" "0" # === FSAA Management === Option "FSAAEnable" "no" Option "FSAAMSPosX0" "0.000000" Option "no_dri" "no" Option "GammaCorrectionI" "0x00000000" Option "FSAAMSPosX1" "0.000000" Option "BlockSignalsOnLock" "on" Option "UseInternalAGPGART" "yes" Option "MonitorLayout" "AUTO, AUTO" # === disable/enable XAA/DRI === Option "no_accel" "no" # === Misc Options === Option "UseFastTLS" "0" # === OpenGL specific profiles/settings === Option "Capabilities" "0x00000000" Option "FSAAMSPosY3" "0.000000" Option "TVColorAdj" "0" Option "TVVPosAdj" "0" Option "TVStandard" "NTSC-M" Option "FSAAMSPosY2" "0.000000" # === TV-out Management === Option "NoTV" "yes" Option "TVHSizeAdj" "0" Option "TVHPosAdj" "0" # === QBS Management === Option "Stereo" "off" Option "ScreenOverlap" "0" Option "FSAAMSPosX3" "0.000000" Option "TVVSizeAdj" "0" EndSection # ********************************************************************** # Screen sections # ********************************************************************** # Any number of screen sections may be present. Each describes # the configuration of a single screen. A single specific screen section # may be specified from the X server command line with the "-screen" # option. Section "Screen" Identifier "Screen0" Device "ATI Graphics Adapter" Monitor "Monitor0" DefaultColorDepth 24 #Option "backingstore" Subsection "Display" Depth 8 Virtual 1280 1024 EndSubsection Subsection "Display" Depth 15 Virtual 1280 1024 EndSubsection Subsection "Display" Depth 16 Virtual 1280 1024 EndSubsection Subsection "Display" Depth 24 Virtual 1280 1024 EndSubsection DefaultDepth 24 EndSection # ********************************************************************** # ServerLayout sections. # ********************************************************************** # Any number of ServerLayout sections may be present. Each describes # the way multiple screens are organised. A specific ServerLayout # section may be specified from the X server command line with the # "-layout" option. In the absence of this, the first section is used. # When now ServerLayout section is present, the first Screen section # is used alone. Section "ServerLayout" # The Identifier line must be present Identifier "Server Layout" # Each InputDevice line specifies an InputDevice section name and # optionally some options to specify the way the device is to be # used. Those options include "CorePointer", "CoreKeyboard" and # "SendCoreEvents". InputDevice "Mouse1" "CorePointer" InputDevice "Keyboard1" "CoreKeyboard" InputDevice "Keyboard1" "CoreKeyboard" # Each Screen line specifies a Screen section name, and optionally # the relative position of other screens. The four names after # primary screen name are the screens to the top, bottom, left and right # of the primary screen. Screen "Screen0" EndSection Quote Link to comment Share on other sites More sharing options...
Guest froinlavin Posted April 3, 2005 Report Share Posted April 3, 2005 I would check your xorg0.log file in the /var/log and see if the fglrx module is failing. First, you must have your kernel-source installed, but what I have found is that if you install the kernel-source by typing: urpmi kernel-source That it installs the wrong kernel-source version. This was the case with me, and I was pulling my hair out. You can find the version number of the kernel you are running by typing: uname -a In a terminal window. Make sure that this version matches the version of the kernel source files that can be found in /usr/src. Also make sure that the folder that the kernel source is installed in (usually the version number of the kernel) is symlinked as linux in /usr/src. I found that while i was running kernel 2.6.8.1-12mdk that sources were installed for 2.4. Unintalling kernel-souce, and then picking the correct kernel-souce version in rpmdrake and then uninstalling fglrx and reinstalling it again so that it would add in the appropritate modules for the kernel did the trick. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.