Guest stblack Posted September 21, 2004 Report Share Posted September 21, 2004 Hi everybody, I have installed mdk10 official on my laptop and now I have problem in setting acpi and usb. At first boot I have seen that inside lilo.conf there were the boot option acpi=ht. Reading this forum I found that ht meas to load acpi only during boot. With this default option I have seen that I had an error at the end of dmesg and the system were like freezed. I changed into acpi=on, and now the system is working without error, but the usb 2.0 module that with ht option was loaded, now get an error. Considering that I have an external USB HD is a function that I need. The lspci output is : 00:00.0 Host bridge: Intel Corp. 82845G/GL [Brookdale-G] Chipset Host Bridge (rev 03) 00:02.0 VGA compatible controller: Intel Corp. 82845G/GL [Brookdale-G] Chipset Integrated Graphics Device (rev 03) 00:1d.0 USB Controller: Intel Corp. 82801DB USB (Hub #1) (rev 02) 00:1d.1 USB Controller: Intel Corp. 82801DB USB (Hub #2) (rev 02) 00:1d.2 USB Controller: Intel Corp. 82801DB USB (Hub #3) (rev 02) 00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB PCI Bridge (rev 82) 00:1f.0 ISA bridge: Intel Corp. 82801DB LPC Interface Controller (rev 02) 00:1f.1 IDE interface: Intel Corp. 82801DB Ultra ATA Storage Controller (rev 02) 00:1f.3 SMBus: Intel Corp. 82801DB/DBM SMBus Controller (rev 02) 00:1f.5 Multimedia audio controller: Intel Corp. 82801DB AC'97 Audio Controller (rev 02) 00:1f.6 Modem: Intel Corp. 82801DB AC'97 Modem Controller (rev 02) 02:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 02:09.0 CardBus bridge: O2 Micro, Inc. OZ6912 Cardbus Controller During boot I see that usb 2.0 module will not be loaded. the lsmod output is : Module Size Used by Not tainted agpgart 53092 6 (autoclean) snd-seq-oss 30208 0 (unused) snd-seq-midi-event 6144 0 [snd-seq-oss] snd-seq 44720 2 [snd-seq-oss snd-seq-midi-event] snd-pcm-oss 43396 0 (unused) snd-mixer-oss 14224 0 [snd-pcm-oss] snd-intel8x0 22728 0 snd-ac97-codec 52748 0 [snd-intel8x0] snd-pcm 79748 0 [snd-pcm-oss snd-intel8x0] snd-timer 18788 0 [snd-seq snd-pcm] snd-page-alloc 8948 0 [snd-intel8x0 snd-pcm] gameport 3268 0 [snd-intel8x0] snd-mpu401-uart 4800 0 [snd-intel8x0] snd-rawmidi 17344 0 [snd-mpu401-uart] snd-seq-device 5536 0 [snd-seq-oss snd-seq snd-rawmidi] snd 44036 0 [snd-seq-oss snd-seq-midi-event snd-seq snd-pcm-oss snd-mixer-oss snd-intel8x0 snd-ac97-codec snd-pcm snd-timer snd-mpu401-uart snd-rawmidi snd-seq-device] soundcore 6244 0 [snd] nfsd 74128 0 (autoclean) af_packet 14312 1 (autoclean) ide-floppy 15776 0 (autoclean) ide-tape 48240 0 (autoclean) ide-cd 33092 0 (autoclean) cdrom 34048 0 (autoclean) [ide-cd] floppy 55644 0 serial_cs 5652 0 (unused) ds 8564 1 [serial_cs] yenta_socket 12928 1 pcmcia_core 57088 0 [serial_cs ds yenta_socket] button 3532 0 (unused) thermal 7940 0 (unused) processor 10808 0 [thermal] fan 2272 0 (unused) ac 2560 0 (unused) battery 6720 0 (unused) 8139too 16232 1 (autoclean) mii 3816 0 (autoclean) [8139too] nls_iso8859-15 4060 1 (autoclean) nls_cp850 4284 1 (autoclean) vfat 11948 1 (autoclean) fat 38424 0 (autoclean) [vfat] usb-storage 93088 0 (unused) scsi_mod 107360 0 [usb-storage] usb-uhci 24976 0 (unused) usbcore 75148 1 [usb-storage usb-uhci] rtc 8652 0 (autoclean) ext3 60400 2 jbd 39552 2 [ext3] Can someone help me in this module working, I don't have any good idea. Another question. Can I suspend my work with acpi like in winxp? do I need some package to install? thanks in advance [formatted by spinynorman - welcome to the board :)] Quote Link to comment Share on other sites More sharing options...
DragonMage Posted September 22, 2004 Report Share Posted September 22, 2004 Hmm.. it seems that there are the acer only loads usb-uhci module which is only usb 1.1 driver. In order to have usb 2 support, ehci-hcd module needs to be loaded also. Anyway, what does your /etc/modprobe.conf say? Quote Link to comment Share on other sites More sharing options...
Guest stblack Posted September 22, 2004 Report Share Posted September 22, 2004 I have modprobe.preload, not .conf, and is --start-- scsi_hostadapter intel-agp --end-- My /etc/modules.conf is : ---start-- probeall scsi_hostadapter usb-storage probeall usb-interface usb-uhci ehci-hcd alias eth0 8139too above snd-intel8x0 snd-pcm-oss alias sound-slot-0 snd-intel8x0 --end-- thanks Quote Link to comment Share on other sites More sharing options...
DragonMage Posted September 22, 2004 Report Share Posted September 22, 2004 Now that is weird. If you are using Mandrake 10 (with kernel 2.6.x) you should have a /etc/modprobe.conf. Anyway, try loading the module manually by typing this command as root modprobe ehci-hcd Quote Link to comment Share on other sites More sharing options...
Guest stblack Posted September 22, 2004 Report Share Posted September 22, 2004 [root@localhost stblack]# modprobe ehci-hcd /lib/modules/2.4.25-2mdk/kernel/drivers/usb/host/ehci-hcd.o.gz: init_module: No such device Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. You may find more information in syslog or the output from dmesg modprobe: insmod /lib/modules/2.4.25-2mdk/kernel/drivers/usb/host/ehci-hcd.o.gz failed modprobe: insmod ehci-hcd failed Please note that if I boot with acpi=ht that module is loaded I have the kernel 2.4.25-2mdk. Do you think that maybe it's a kernel problem? I can try installing a 2.6.x (>2.6.3 in the instalation of mdk 10 official), what do you think? thanks Quote Link to comment Share on other sites More sharing options...
DragonMage Posted September 23, 2004 Report Share Posted September 23, 2004 Well.. by all means.. do.. The great thing about Mandrake 10.x series is trying kernel 2.6.x. Hyperthreading is supported fully on kernel 2.6.x so acpi=on will use hyperthreading also. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.