xbob Posted July 15, 2004 Report Share Posted July 15, 2004 FYI: Ran some commands, saved them to a text file and attached them to this post. dmesg > dmesg.txt dmesg.txt Linux agpgart interface v0.100 (c) Dave Jones<!--QuoteEBegin-->agpgart: Detected VIA KT400/KT400A/KT600 chipset<!--QuoteEBegin-->agpgart: Maximum main memory to use for agp memory: 941M<!--QuoteEBegin-->agpgart: AGP aperture is 64M @ 0xe0000000 lspci -v > lspci.txt lspci.txt 00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400 AGP] Host Bridge (rev 80)<!--QuoteEBegin--> Subsystem: VIA Technologies, Inc. VT8377 [KT400 AGP] Host Bridge<!--QuoteEBegin--> Flags: bus master, 66Mhz, medium devsel, latency 8<!--QuoteEBegin--> Memory at e0000000 (32-bit, prefetchable) [size=64M]<!--QuoteEBegin--> Capabilities: [80] AGP version 3.5<!--QuoteEBegin--> Capabilities: [c0] Power Management version 2 I don't know if this helps at all!! -SP <{POST_SNAPBACK}> I've seen in several other messages that 2.6 sees the KT600 as part of the KT400 family so that shouldn't be the issue, and it looks like it's finding your AGP stuff just fine. Have you tried setting NVAgp to any of the other values? Quote Link to comment Share on other sites More sharing options...
sampsaltakis Posted July 15, 2004 Author Report Share Posted July 15, 2004 :D OK, I've check around the net via mb's nvidia mb's, and found this on nvnews.net: Re: VIA KT600 chipset lack of support?Yes, my system is stable. I had to ruin my 80 day uptime just to check the bios settings for you! No problem... The most important thing is to make sure: PCI Delayed Transaction ENABLED I also have: APIC ENABLED MPS 1.4 AGP aperture 64M AGP Mode 4x Drive Control AUTO AGP Master 1 WS Write ENABLED AGP Master 1 WS Read ENABLED AGP 3.0 Calibration Cycle ENABLED System Bios Cacheable DISABLED Video Ram Cacheable DISABLED Hope that helps. -Jan After making these changes I started to see other errors... :unsure: I've seen in several other messages that 2.6 sees the KT600 as part of the KT400 family so that shouldn't be the issue, and it looks like it's finding your AGP stuff just fine. Have you tried setting NVAgp to any of the other values? <{POST_SNAPBACK}> Set NVAgp to "2", and the nVidia driver LOADED YES!! You guys RULE!!!! BTW: Strange thing UT'04 works just fine....ET has no sound. Great somethiing else to look into -SP Quote Link to comment Share on other sites More sharing options...
xbob Posted July 15, 2004 Report Share Posted July 15, 2004 :D OK, I've check around the net via mb's nvidia mb's, and found this on nvnews.net: Re: VIA KT600 chipset lack of support?Yes, my system is stable. I had to ruin my 80 day uptime just to check the bios settings for you! No problem... The most important thing is to make sure: PCI Delayed Transaction ENABLED I also have: APIC ENABLED MPS 1.4 AGP aperture 64M AGP Mode 4x Drive Control AUTO AGP Master 1 WS Write ENABLED AGP Master 1 WS Read ENABLED AGP 3.0 Calibration Cycle ENABLED System Bios Cacheable DISABLED Video Ram Cacheable DISABLED Hope that helps. -Jan After making these changes I started to see other errors... :unsure: I've seen in several other messages that 2.6 sees the KT600 as part of the KT400 family so that shouldn't be the issue, and it looks like it's finding your AGP stuff just fine. Have you tried setting NVAgp to any of the other values? <{POST_SNAPBACK}> Set NVAgp to "2", and the nVidia driver LOADED YES!! You guys RULE!!!! BTW: Strange thing UT'04 works just fine....ET has no sound. Great somethiing else to look into -SP <{POST_SNAPBACK}> Glad it worked, what's the word on your sound in ET? Quote Link to comment Share on other sites More sharing options...
sampsaltakis Posted July 16, 2004 Author Report Share Posted July 16, 2004 Glad it worked, what's the word on your sound in ET? Found somewhere to use a wrapper: artsdsp -m /usr/local/games/et Man, Let me tell you, I'd rather play without audio. There is about a one (1) second delay. Drives you up the wall. So, basiclly, sound is still an issue. Hopefully someone could help me out. I posted a message in the Games Section, we'll see if someone else has had this issue. BTW. Thanks for all you help. -SP Quote Link to comment Share on other sites More sharing options...
xbob Posted July 16, 2004 Report Share Posted July 16, 2004 Glad it worked, what's the word on your sound in ET? Found somewhere to use a wrapper: artsdsp -m /usr/local/games/et Man, Let me tell you, I'd rather play without audio. There is about a one (1) second delay. Drives you up the wall. So, basiclly, sound is still an issue. Hopefully someone could help me out. I posted a message in the Games Section, we'll see if someone else has had this issue. BTW. Thanks for all you help. -SP <{POST_SNAPBACK}> No problem, I learned the same way you did, I have an unsupported chipset as well. Glad to help. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.