kyzzar Posted July 8, 2004 Report Share Posted July 8, 2004 Dear All, Good Morning!!! I am using DSL connection with router provide of my ISP and also with a 4 ports HUB. but I cant connect internet using Mandrake 10.0 Community I always got notification " Bringing up interface eth0" has Falied I'm doing many times to put the Static IP on the Mandrake Control center \ Network & Internet then New connection.... But always failed... Please anybody know this.... Please I need your helpppp... to work this properly... Thanks Regards kyzzar Moved by Ixthusdan Quote Link to comment Share on other sites More sharing options...
Ixthusdan Posted July 8, 2004 Report Share Posted July 8, 2004 Mandrake Control Center is a poor instrument for setting up a network. Edit the files directly. Put your setup info here, and we will tell you what to put where. Quote Link to comment Share on other sites More sharing options...
kyzzar Posted July 8, 2004 Author Report Share Posted July 8, 2004 Mandrake Control Center is a poor instrument for setting up a network. Edit the files directly. Put your setup info here, and we will tell you what to put where. Dear sir, I have an Static IP address that provide me of our ISP provider. Please tell to me sir...i will give the info... Thanks Kyzzar Quote Link to comment Share on other sites More sharing options...
kyzzar Posted July 8, 2004 Author Report Share Posted July 8, 2004 Mandrake Control Center is a poor instrument for setting up a network. Edit the files directly. Put your setup info here, and we will tell you what to put where. Dear Sir, I only put the IP to the Network & Internet then new connection....so only that.... but once i restart it... theres an error "falied". what kind info you want to know...sorry for saying this I'am newbie in mandrake... thanks Regards Kyzzar Quote Link to comment Share on other sites More sharing options...
Guest sleepyhead Posted July 8, 2004 Report Share Posted July 8, 2004 I'm no networking expert, but here goes... Look in /etc/sysconfig/network-scripts. There should be a file called ifcfg-eth0. Post the contents of that file. Also, look in /etc/modules.conf. There should be a line like: alias eth0 some_module_name Let us know what the drivername is, and verify it's the correct module. There are probably more files to look at, but this will make a start... Quote Link to comment Share on other sites More sharing options...
kyzzar Posted July 8, 2004 Author Report Share Posted July 8, 2004 I'm no networking expert, but here goes... Look in /etc/sysconfig/network-scripts. There should be a file called ifcfg-eth0. Post the contents of that file. Also, look in /etc/modules.conf. There should be a line like: alias eth0 some_module_name Let us know what the drivername is, and verify it's the correct module. There are probably more files to look at, but this will make a start... Dear Sleepyhead, I follow your instruction... I found only a ifcfg-lo... but in th etc/modules.conf i found the alias there like this: probeall scsi_hostadapter imm ppa above snd-via82xx snd-pcm-oss alias eth0 natsemi alias sound-slot-0 snd-via82xx alias eth1 8239too what should i do... regards kyzzar Quote Link to comment Share on other sites More sharing options...
streeter Posted July 8, 2004 Report Share Posted July 8, 2004 You appear to have 2 network cards defined - please post the output of lsmod | grep natsemi lsmod | grep 8239too This will tell us if the drivers are being loaded. Then have a look at my howto at : My howto Also look at the sticky post at the top of the networking forum Chris Quote Link to comment Share on other sites More sharing options...
kyzzar Posted July 9, 2004 Author Report Share Posted July 9, 2004 You appear to have 2 network cards defined - please post the output of lsmod | grep natsemi lsmod | grep 8239too This will tell us if the drivers are being loaded. Then have a look at my howto at : My howto Also look at the sticky post at the top of the networking forum Chris Dear all, Goodmorning!!! I type the code to the console and here the result... [root@wizz root]# lsmod | grep natsemi natsemi 23840 0 [root@wizz root]# lsmod | grep 8139 8139too 23712 0 mii 4992 1 8139too youknow, yesterday someone teach me how to setup but he was dissapointed to work it. always failed "Bringing uo interface eth0: Failed "Brinigng upinterface eth1: Failed Is it my hardware need a compatabily onmy system.... I always follow the intsuction but always failed toconnect.... Please help me... Thanks regards Kyzzar Quote Link to comment Share on other sites More sharing options...
kyzzar Posted July 9, 2004 Author Report Share Posted July 9, 2004 You appear to have 2 network cards defined - please post the output of lsmod | grep natsemi lsmod | grep 8239too This will tell us if the drivers are being loaded. Then have a look at my howto at : My howto Also look at the sticky post at the top of the networking forum Chris Dear all, Goodmorning!!! I type the code to the console and here the result... [root@wizz root]# lsmod | grep natsemi natsemi 23840 0 [root@wizz root]# lsmod | grep 8139 8139too 23712 0 mii 4992 1 8139too youknow, yesterday someone teach me how to setup but he was dissapointed to work it. always failed "Bringing uo interface eth0: Failed "Brinigng upinterface eth1: Failed Is it my hardware need a compatabily onmy system.... I always follow the intsuction but always failed toconnect.... Please help me... Thanks regards Kyzzar Dear all, Once i type the MCC in the console and it will shows up to my screen the mandarke control center and i go to network & internet then new connection to put the Static IP address...then when i look the console i see something like this: [root@wizz root]# mcc [root@wizz root]# error reading information on service tmdns : no such file or directory error reading information on service zcip: no such file or directory error reading information on service tmdns: no such file or directory error reading information on service zcip: no such file or directory error reading information on service tmdns: no such file or directory error reading information on service zcip: no such file or directory error reading information on service tmdns: no such file or directory error reading information on service zcip: no such file or directory shutting down loopback interface [ OK ] Setting network parameters [ OK ] Bringing up loopback inteface [ OK ] Bringing up interface eth0 [ FAILED ] Bringing up interface eth1 [ FAILED ] I hope somebody encountered this problem.... Thanks Regards Kyzzar Quote Link to comment Share on other sites More sharing options...
Ixthusdan Posted July 9, 2004 Report Share Posted July 9, 2004 I am curious, why two interfaces? What else are you doing on your network with this machine? Quote Link to comment Share on other sites More sharing options...
kyzzar Posted July 9, 2004 Author Report Share Posted July 9, 2004 I am curious, why two interfaces? What else are you doing on your network with this machine? Dear sir, Beacause i want to share internet to other computer. But Im trying to connect internet Im using the one lan card i put there the Static IP but nothing happen when i browse some address site. I'll check my DSL modem or router but its working because i testing in microsoft windows the internet i can internet why in Mandrake the device is detected i mean the lan card...but always failed to connect internet... my setup: One telephone line One DSL modem or router One HUB (4 ports) two network cable ______ | |----------->[HUB]------> COMPUTER | DSL | MODEM| | | --------- Please help me... Thanks Regards Kyzzar Quote Link to comment Share on other sites More sharing options...
Jet2k5 Posted July 9, 2004 Report Share Posted July 9, 2004 Kyzzar, First of all what is the name,model and maker of the DSL modem, Router and who is your ISP. Should first try to connect to the internet directly from the modem to your computer that is running Mandrake. so it should be DSL--->Computer For the router it should be DSL--->Router-->Computer, 1 ,2 ,3 ,4---Wireless. I'll help you to the best of my abilitys just as soon as I know what your running. -Luis Quote Link to comment Share on other sites More sharing options...
Ixthusdan Posted July 9, 2004 Report Share Posted July 9, 2004 Which version of windex are you using? Check the windex ip. If you have a router/hub, I do not believe you'll need another nic in your pc. The other pc's will feed from the router/hub. Quote Link to comment Share on other sites More sharing options...
kyzzar Posted July 9, 2004 Author Report Share Posted July 9, 2004 Kyzzar, First of all what is the name,model and maker of the DSL modem, Router and who is your ISP. Should first try to connect to the internet directly from the modem to your computer that is running Mandrake. so it should be DSL--->Computer For the router it should be DSL--->Router-->Computer, 1 ,2 ,3 ,4---Wireless. I'll help you to the best of my abilitys just as soon as I know what your running. -Luis Dear Luis The model is ZYXEL PRESTIGE 600 sEREIS One port for Network cable one port for Telephone line plus the Ac voltages and the name of our ISP is SUBIC TELECOMMUNICATIONS Thanks Regards\ Kyzzar Quote Link to comment Share on other sites More sharing options...
liquidzoo Posted July 9, 2004 Report Share Posted July 9, 2004 Which version of windex are you using? Check the windex ip. If you have a router/hub, I do not believe you'll need another nic in your pc. The other pc's will feed from the router/hub. Ix From conversations on #musb, I don't believe it is a router. I think it's the DSL Modem going to a Hub then out to the computers. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.