Jump to content
  • Announcements

    • spinynorman

      Mandriva Official Documentation

      Official documentation for extant versions of Mandriva can be found at doc.mandriva.com.   Documentation for the latest release may take some time to appear there. You can install all the manuals from the main repository if you have Mandriva installed - files are prefixed mandriva-doc.
    • paul

      Forum software upgrade   10/29/17

      So you may have noticed the forum software has upgraded !!!
      A few things that have changed. We no longer have community blogs (was never really used) We no longer have a portal page.
      We can discuss this, and decide whether it is needed (It costs money) See this thread: Here
kilimanjaro

tethering

Recommended Posts

Aloha all

 

I just go a new droid x and I am trying to figure out how to connect to the internet through the usb tethering available with the droidx. Any ideas?

 

Kili

Share this post


Link to post
Share on other sites

I am not an expert in this subject and I know very little about the droid, but if your droid connects the way other mobile phones do it will appear as a modem to your computer. Use

dmesg | grep tty before and after connecting your phone to tell you which /dev/tty devices were created when the phone was connected to the usb port. On my installation of Mandriva 2010.0 two devices are created; /dev/ttyACM0 and /dev/ttyACM1, both of which seem to work for connecting to the Internet.

 

cdc_acm 2-3.4:3.1: ttyACM0: USB ACM device
cdc_acm 2-3.4:3.3: ttyACM1: USB ACM device

 

Once the phone has been connected and the appropriate /dev devices exist you can run wvdialconf which will look for a modem and create a file /etc/wvdial.conf. Look in that file for the baud rate and other details discovered by wvdialconf.

 

You can use wvdial, gnome-ppp, kppp, or other dialer to manage the connection. I like kppp because it allows me to choose my own DNS servers, haven't figured out how to do that when using wvdial.

 

The phone number to be dialed for connection will typically be *99# to connect to your phone's default APN. If other APNs have been programmed into your phone then they may be reached by dialing slightly longer numbers, such as *99***2# or *99***3# for second and third APNs respectively.

 

The above may or may not apply to your droid depending on how similar it is to most other mobile phones.

Edited by boatman9

Share this post


Link to post
Share on other sites

i used the set up new network connection under control center. pick wired connnection and the phone showed up as usb0 (htc android phone). just accepted defaults and it worked.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×