Jump to content
  • Announcements

    • spinynorman

      Mandriva Official Documentation

      Official documentation for extant versions of Mandriva can be found at doc.mandriva.com.   Documentation for the latest release may take some time to appear there. You can install all the manuals from the main repository if you have Mandriva installed - files are prefixed mandriva-doc.
    • paul

      Forum software upgrade   10/29/17

      So you may have noticed the forum software has upgraded !!!
      A few things that have changed. We no longer have community blogs (was never really used) We no longer have a portal page.
      We can discuss this, and decide whether it is needed (It costs money) See this thread: Here

Mouse Problems in 2010.1

Recommended Posts



I recently updated to 2010.1 and an having a couple of issues. For this issue, right mouse clicks don't bring up the menu as it had with 2010. Additionally, Virtualbox doesn't see right-clicks either (WinXP). However, I can paste text with the right button (something that used my middle button before). The mouse is a Logitech MX Laser. It has *20* buttons. Could anyone help me fix this (in the most approved manner). I would like to keep my buttons all working (scroll in firefox for example).


Here's what is in the X Log (related to the mouse):

(II) config/hal: Adding input device Logitech USB RECEIVER

(**) Logitech USB RECEIVER: always reports core events

(**) Logitech USB RECEIVER: Device: "/dev/input/event1"

(II) Logitech USB RECEIVER: Found 20 mouse buttons

(II) Logitech USB RECEIVER: Found scroll wheel(s)

(II) Logitech USB RECEIVER: Found relative axes

(II) Logitech USB RECEIVER: Found x and y relative axes

(II) Logitech USB RECEIVER: Configuring as mouse

(**) Logitech USB RECEIVER: YAxisMapping: buttons 4 and 5

(**) Logitech USB RECEIVER: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200

(II) XINPUT: Adding extended input device "Logitech USB RECEIVER" (type: MOUSE)

(**) Logitech USB RECEIVER: (accel) keeping acceleration scheme 1

(**) Logitech USB RECEIVER: (accel) acceleration profile 0

(II) Logitech USB RECEIVER: initialized for relative axes.


Here's what Hal shows for my logitech device (Note: I only have the mouse)

72: udi = '/org/freedesktop/Hal/devices/usb_device_46d_c50e_noserial_if0_logicaldev_input'

linux.hotplug_type = 2 (0x2) (int)

linux.subsystem = 'input' (string)

info.category = 'input' (string)

info.capabilities = { 'input', 'input.mouse' } (string list)

input.device = '/dev/input/event1' (string)

input.originating_device = '/org/freedesktop/Hal/devices/usb_device_46d_c50e_noserial_if0' (string)

input.product = 'Logitech USB RECEIVER' (string)

linux.device_file = '/dev/input/event1' (string)

info.subsystem = 'input' (string)

info.product = 'Logitech USB RECEIVER' (string)

info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c50e_noserial_if0_logicaldev_input' (string)

linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.1/usb3/3-2/3-2:1.0/input/input1/event1' (string)

info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_c50e_noserial_if0' (string)

input.x11_driver = 'evdev' (string)


123: udi = '/org/freedesktop/Hal/devices/usb_device_46d_c50e_noserial_if0'

usb.interface.class = 3 (0x3) (int)

usb.interface.subclass = 1 (0x1) (int)

usb.interface.protocol = 2 (0x2) (int)

linux.hotplug_type = 2 (0x2) (int)

linux.subsystem = 'usb' (string)

info.linux.driver = 'usbhid' (string)

info.subsystem = 'usb' (string)

info.product = 'USB HID Interface' (string)

info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c50e_noserial_if0' (string)

usb.num_ports = 0 (0x0) (int)

usb.device_revision_bcd = 9488 (0x2510) (int)

usb.speed = 1.5 (double)

usb.version = 1.1 (double)

usb.is_self_powered = false (bool)

usb.can_wake_up = true (bool)

usb.linux.device_number = 2 (0x2) (int)

usb.bus_number = 3 (0x3) (int)

usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.1/usb3/3-2/3-2:1.0' (string)

usb.configuration_value = 1 (0x1) (int)

usb.num_configurations = 1 (0x1) (int)

linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.1/usb3/3-2/3-2:1.0' (string)

info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_c50e_noserial' (string)

usb.device_protocol = 0 (0x0) (int)

usb.device_class = 0 (0x0) (int)

usb.device_subclass = 0 (0x0) (int)

usb.vendor_id = 1133 (0x46d) (int)

usb.product = 'USB HID Interface' (string)

usb.num_interfaces = 1 (0x1) (int)

usb.vendor = 'Logitech, Inc.' (string)

usb.interface.number = 0 (0x0) (int)

usb.product_id = 50446 (0xc50e) (int)

usb.max_power = 70 (0x46) (int)


124: udi = '/org/freedesktop/Hal/devices/usb_device_46d_c50e_noserial'

info.vendor = 'Logitech, Inc.' (string)

battery.type = 'mouse' (string)

battery.is_rechargeable = true (bool)

linux.subsystem = 'usb' (string)

info.linux.driver = 'usb' (string)

linux.hotplug_type = 2 (0x2) (int)

battery.csr.has_res = false (bool)

battery.csr.has_sms = false (bool)

battery.csr.is_dual = false (bool)

info.subsystem = 'usb_device' (string)

info.product = 'MX1000 Laser Mouse' (string)

info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c50e_noserial' (string)

usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.1/usb3/3-2' (string)

usb_device.configuration_value = 1 (0x1) (int)

usb_device.num_configurations = 1 (0x1) (int)

usb_device.device_class = 0 (0x0) (int)

usb_device.device_subclass = 0 (0x0) (int)

usb_device.num_interfaces = 1 (0x1) (int)

usb_device.device_protocol = 0 (0x0) (int)

usb_device.product_id = 50446 (0xc50e) (int)

usb_device.vendor = 'Logitech, Inc.' (string)

usb_device.vendor_id = 1133 (0x46d) (int)

usb_device.device_revision_bcd = 9488 (0x2510) (int)

usb_device.max_power = 70 (0x46) (int)

usb_device.num_ports = 0 (0x0) (int)

usb_device.linux.device_number = 2 (0x2) (int)

usb_device.speed = 1.5 (double)

usb_device.version = 1.1 (double)

usb_device.is_self_powered = false (bool)

usb_device.can_wake_up = true (bool)

usb_device.bus_number = 3 (0x3) (int)

usb_device.product = 'MX-1000 Cordless Mouse Receiver' (string)

linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.1/usb3/3-2' (string)

info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_13_1' (string)


Thanks in advance,



[moved from Installing Mandriva by spinynorman]

Share this post

Link to post
Share on other sites

I know this is going to sound dumb, but have you tried to set up the mouse settings again in MCC?



Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now