hari78

the urpmi command did not work as it said no such package feeling lost., i reinstalled the whole OS and no w it works fine thanks a lot for your suggestions

Thanks for your reply this error message appears when startx command is given: warning:symbol map for key (AB08)redefined using last definition for conflicting fields ( similar message for AB09,AB10,BKSL,LCTL and SPCE ) Errors from Xkb comp are not fatal to the X server. fatal server error: could not open default font 'fixed' X10:fatal 10 error 104 (connection reset by peer) on Xserver "0.0" after 0 requests ( 0 known processed) with 0 events remaining Plz tell me what to do thanks in advance

while booting the system, only command line appears. It has been working fine for several months but suddenly this problem appears.. any body plz help urgently

thanks..it works now

i am not able to connect to internet through pc tel internal modem hsp 56 kbps . i am using Mandrake 10.0 . anybody plz help

while using latex, the files get convered into dvi format. but they are not opening through xdvi command. similary when converting to pdf format, an empty pdf file gets generated.anybody plz help thanks in advance

i am unable to open some MS word files in star office 7 where as many others open well. What shall be the reason for this and what is the way to fix it? any body plz help a file which cannot be opened in its proper format is attached here i am using mandrake 10.0 thanks in advance A_concept_note_on_the_Adolescence_Education_Programme.doc

I have to open a file oledata.mso for PEST in Unix.I am unable to open it both in Windows and Linux. Can anyone please tell me how to extract files from this oledata.mso

thank you. it works welll

while opening kile, i get the follwing error message kile: error while loading shared libraries: libstdc++.so.6: cannot open shared object file: No such file or directory but libstdc++.so.6 is there in usr/llocal/lib any one, please instruct on what to do thanks in advance

yes..

thanks for your reply.. but at the time of make install, still some error messages come such as this: ateEntry*, CByteArray*)': dcupdatemanager.cpp:677: warning: comparison between signed and unsigned integer expressions make[2]: *** [dcupdatemanager.o] Error 1 make[2]: Leaving directory `/home/hari/hari1/dc/dcgui-qt-0.3.2/dcgui' make[1]: *** [install-recursive] Error 1 make[1]: Leaving directory `/home/hari/hari1/dc/dcgui-qt-0.3.2/dcgui' make: *** [install-recursive] Error 1 hope you will help in this case also... sincerely

thanks a lot for your reply after installing -devel packages, now this error message comes checking for Qt... configure: error: Qt (>= Qt 3.0) (headers and libraries) not found. Please check your installation! plz help in this case also thanking you

The problem is that i want the monitor to go into power saving mode at the login screen. The Xscreensaver settings doesnt work directly. Plase note that i am not asking for the user specific setting of screen saver. i am using Mandrake 10.0 Thanks in advance. [moved from Software by spinynorman]

while installing dcgui -qt, i got the following error message not using lib directory suffix checking for X... configure: error: Can't find X includes. Please check your installation and add the correct paths! i have installed Xfree 86 but even after that the error message comes. i am using mandrake 10.0 plz instruct me on what to do thanks in advance [moved from Software by spinynorman]

i have reinstalled Mandrake 10.0 two days back and after that whenever i shut down the system, one partition gets unmounted . the next time, it has to be mounted again through diskdrake. can anyone please help on how to solve this problem? thanks in advance

thank you all for your kind guidance.. now there is considerable improvement in the speed of the system when fdisk command is given, this result is shown Usage: fdisk [-l] [-b SSZ] [-u] device E.g.: fdisk /dev/hda (for the first IDE disk) or: fdisk /dev/sdc (for the third SCSI disk) or: fdisk /dev/eda (for the first PS/2 ESDI drive) or: fdisk /dev/rd/c0d0 or: fdisk /dev/ida/c0d0 (for RAID devices similarly when p q command is given then it shows OLDPWD not set is there anything to be done? plz help

thanks for your reply the command cf disk shows only 135 MB swap space. and RAM is 256 MB. do i have to increase the swap space? if so, what is the best way to do this? similarly, when i give hdparm command (in response to devries's post ) now i get the follwing message in konsole /dev/hda: multcount = 16 (on) IO_support = 0 (default 16-bit) unmaskirq = 0 (off) using_dma = 1 (on) keepsettings = 0 (off) readonly = 0 (off) readahead = 256 (on) geometry = 16383/255/63, sectors = 78242976, start = 0 is there any change required? plz help thanking you

thanks a lot for your detailed reply. i have only 256 RAM. so how much space be given for swap? is the speed of the system dependent on the space available for swap?

thanks a lot for your reply. in fact, there is some improvement in the speed of the system now but when the command hdparm.. is given in konsole, the message comes:/dev not supported by hdparm. is it any problem? thanks in advance

i had to reinstall mandrake 10.0 and after that the system has become extremely slow so much that it takes several minutes to open an application. what shall be the possible causes of this? any one,please help... also i am not able to browse through konqueror or mozilla though connection to internet is all right thanks in advance

Thanks a lot for your reply I tried the urpmi command to install qtped. but it asks for a fourth cd which i don't have. what can one do in those cases? Thanks in advance

while trying to install qtparted, i get the following message configure: error: *** libparted >= 1.6.0 not installed - please install first *** where can i get libparted from? can anyone please help... i am using mandrake 10.0

i was able to install other packages

while installing libxml2 , i got the following message . can anyone please help.. cannot open lock file ///var/lib/rpm/RPMLOCK in exclusive mode cannot open Packages database in /var/lib/rpm