Jump to content

inflexion

Members
  • Posts

    144
  • Joined

  • Last visited

Posts posted by inflexion

  1. ill try disabling the WAN side config and see what that does and the virtual server is the same as port forwarding on my router.

     

    as for the firewall that all checked out and its fine

     

    number of ports open is minimal as the only users will be me and at the most two other people

  2. Right im trying to set up a personal ftp.

    Here's how its working so far

     

    internally using IP address fine, performs as expected

     

    externally it all falls down. im using a no-ip.com farwarder but even when i put in my IP address i still get the login box for my router when i do http://ip address

     

    when i do ftp://ip address i get 503 login failed.

     

    On my router i have set a virtual server with port 21 UDP to my ip address

    enabled the ftp server option so im stuck as to whats missing?

     

    :help:

  3. Well, Yellow Dog Linux is KDE based and designed for Macs - I assume it comes pre installed with Kontact?

    Yea i know that but no one has airport extreme support so thats out (crap i know!)

     

    Thanks for the location ill go dig them out

  4. where are all of the inbox messages kept as i cant find then!

     

    Also can i import them into Entourage on my mac?

     

    My linux box will be leaving me for a while or forever as the insurance man might want it :( so i need to back up now.

     

    Little of the mark here but if anyone knows how or if i can install Kontact on a mac id be eternally greatful :cheesy:

  5. Know a little about samba so have set it to allow address that start with 10.0. and i can access the laptop by doing

    smb://ip address

     

    then it gives me a login but there is no password set on the win machine so i cant access the shares.

  6. eth1 is my NIC which is what im connected with now

    eth0 could be firewire im not sure

    eth2 should be the card as thats what it assigns at boot but iwconfig gives eth0, eth1 and sit0

     

    doing ifconfig sit0 down

    ifconfig sit0 up

     

    gives me the info on it has it been IPv6 in IPv4 so i think that this is the firewaire socket as thats one of the connection options in MCC.

     

    also the info for eth0 gives me a massive MAC address so im more than confused by this

  7. nothing works, doing

    ifconfig eth0 down

    ifconfig eth0 up

    brought it up in ifconfig but it wasnt the wifi card :(

     

    Im guessing that its the PCMCIA slot rather than the card because in

    system>config>kde>info>pcmcia

    it says that there is no controller detected

     

     

    oh and /etc/init.d/network start gives

    Setting network parameters: [ OK ]

    Bringing up loopback interface: [ OK ]

    Bringing up interface eth1: [ OK ]

    Bringing up interface eth2: orinoco_cs device eth2 does not seem to be present, delaying initialization.

    [FAILED]

  8. [root@localhost matt]# /etc/init.d/pcmcia stop

    Shutting down PCMCIA services: ERROR: Module ds is in use by orinoco_cs

    ERROR: Module pcmcia_core is in use by orinoco_cs,ds

    done.

    [root@localhost matt]# /etc/init.d/pcmcia start

    Starting PCMCIA services: cardmgr[6295]: no sockets found!

    done.

    [root@localhost matt]#

  9. Set up 10.1 to run my card at boot but now i finally set up my wireless network and have some use for it, the card wont run.

     

    Everything works fine in winblows.

     

    At boot it says that its not present and then when i try to config it through MCC it just flashes up some error messages far to quickly for anyone to see

     

     

    The card is a linksys wpc11 v3

×
×
  • Create New...