Jump to content

theYinYeti

Members
  • Posts

    2151
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by theYinYeti

  1. Hello, What does this command say (as root): ls -la /home/bob If you're paranoid about the contents of your home-directory, just replace -la with -ld and it should be enough :) Yves.
  2. Hi, I removed the battery during about 90 minutes. Then I put it back, and switched the PC on. The BIOS complained about bad settings (normal), so I entered the config interface, set the right date and time (formerly 1990), set IDE buses to auto, and rebooted. Boot went fine. Login OK. But... Neither Xephem nor Celestia (both newly installed using Smart) wanted to start: both dumped a core file. I launched partimage in the background (in a terminal window), and then started to play xmoto. After about 3 minutes, the computer freezed, not even responding to AltSysRQ shortcuts. I don't know if it is because of xmoto (which I played last Sunday without problems) or partimage... Would you say this is normal? I don't think so, but I'm new to AMD, new to Radeon, new to 64-bits... so I may be mistaken. Is any of you actually reliably using Mandriva 2007 on a PC with an AMD64 3200+ AM2 processor, and something close to a Radeon9200? Yves.
  3. Thank you daniewicz. I need to understand, and now I do :) I'll clear the CMOS then. Yves
  4. Wow! That much? I'll think about it... It probably has. What normal temps should I see for this AMD64-3200+? I thought so. However I did not choose: is there a way the Free "dual-arch" DVD can be forced into 32-bit install mode?That being said, before installing with the DVD, I formerly installed with the 4 2007 CDs (32 bits) I had previously used at work without any problems. On this computer, I had problems (same as above)! That's when I decided I might have better luck with a SHA1-checked DVD. One difference though, that made me suspect the medias at that time: The CDs' installer freezed while installing packages, and I had to use the text-mode install to see the end of it; the latter also showed non-blocking urpmi-related errors though. I thought the media had gone bad, and then tried the DVD. I already selected "load factory defaults" in the BIOS UI. Is that the same? I thank you both for those first ideas. I have one question though: are these things to do "out-of-principle" so that we have a clean base to think on? Or are these ideas directly related with the problems at hand, ie: in your experience, failure to do so may directly create a problem as noted above? I'm not sure my question is clear here... anyway, forget about this last question if you don't understand, it's not really important... Yves.
  5. Hello, I'm currently overwhelmed by work; however I found time this week-end to setup my new PC, bought second-hand: AMD64 3200+, ATX tower, 512MB ram, Radeon graphics card; Fresh install of Free Mandriva 2007 DVD. It is a dream-machine, compared to my former PC: a PII350 with a Rage128 graphics card! Unfortunately, I'm to the point where I wonder if I should go back to my rock-stable PII350... - With this new PC, I carelessly entered the 64-bit world. I discovered that all software is not available yet, especially the Flash plugin, which in turn requires the 32-bit version of Firefox. Hence each time I enter the software manager, it wants to automatically upgrade FFox and libFFox, and I have to "clear the selection" first; this is annoying. - Things crash! For example, urpmi crashes often. Most of the time, I can relaunch and it is OK. I even had rpm crash, and had to quite often --initdb and --rebuilddb... Firefox crashes quite a lot also, but others do too: for example Gcompris crashed, or random games. It works, and then it stops... I relaunch the program and it works... or not... in which case I reboot and it works anew. xterm did this to me also: it wouldn't relaunch until I had rebooted. - Some programs can't be used. I wanted to create an image of my hda1 partition with partimage. The 64-bit version says this arch is not supported (wrong version of GCC, even if I recompile from the srpm). The 32-bit version crashes halfway through the image-file creation (roughtly after a third of hda1 is copied). I want to keep this wonderful speed! All is so fast! But it is really very unstable. WHY? Is it because 64-bit is too new? Do you all 64-bit Mandriva users also have such issues? Or is it a hardware problem with the motherboard? I spent 2+ hours checking RAM with Memtest86+ (10 passes): ram is reported OK. I tried checking the BIOS settings: settings are fine BUT something happened that never happened to me before: The BIOS config UI crashed! I mean: I was going to verify the boot order, and then nothing reacted anymore, I had to keep the halt button pressed during 5 seconds to power the PC off; this happened twice! On the other hand, although I didn't use Windows for more than a few downloads (among which the first 4 GB of the mandriva DVD) with FFow win32, all seems fine in Windows. So?... Yves.
  6. The screen itself maybe. At least for my screen, there's a button that makes a menu appear, and in this menu, there is some control for powersave. Yves.
  7. Thanks to all who helped me!!!! It seems the modem was the cause. After a good amount of lost hours and anger, I finally thought of looking at the modem's diagnostics page: it showed occasional (not permanent but quite often still) FAIL status for either: - access to first hop (internet provider), or - ping first DNS server. In such case, it said: reboot the modem. So did I. It works. Yves.
  8. Thanks ian. Unfortunately the applet hangs during the test the same way the other applet did. As for tptest, I installed the latest sourceforge rpm (intended for rh9) for the server, and I compiled the latest source for the client. The example from the manuel, ran on server localhost, just fails: each test end with "Failed test" (or something like this). I wonder what happens, so suddenly! Yves.
  9. ...I've been trying to get on MUB for the last 15 minutes, and I'm now waiting for my tab to display, so I might as well answer to this meanwhile :) I'm not sure my answer is the right one. However, this makes me think of an "un-fixed" DVD. Windows is able to deal with CD and DVD that are not fixed. Linux on the other hand, does not seem to be able to read those disks. And the process being highly un-standard, it wouldn't surprise me that the reading ability depends on the drive itself, thus making it a plug-and-pray issue on each Windows PC; for Linux, though, no amount of "pray" seems to do the trick. This is something that bugs me a lot! Linux unable to do something that Windows can :shocked: There must be a way... Yves.
  10. @daniewicz: Reading the status bar, the outbound test runs fine for a little less than 20 seconds, and then the inbound test begins, and nothing happens anymore. I tried waiting several minutes, but the page is dead... only closing the tab has any effect. @Mhn: I'll try and find this tool.
  11. The setup is: PC<->eth0 <==> eth0<->ADSL box<->wan0 <==> ISP The ADSL box acts as a router for my LAN; only my PC is on the LAN at the moment, though. Unfortunately, even though I know my way with Linux and computing, and to a lesser degree with networking, I know next to nothing about network analysis in case of performance problem, as is now the case. I can't say if upload is OK or not, however I know that download is too slow: even without images, or using the links browser, loading a MUB page is almost half a minute long! And I've begun installing links-hack through urpmi, and here's the status line: 41% of 2585k completed, ETA = 0:26:02, speed = 912 (I've had minutes long of "speed = 0" before that line...) Based on your post (I saw ICMP), I tried running a simple "ping mozilla.org", which said: 64 bytes from moz.org01.nslb.sj.mozilla.com (63.245.209.11): icmp_seq=16 ttl=234 time=198 ms several times. I'm not sure about the computation, but would that mean 323B/s ? (64B/0.198s) If so, then it is indeed slow! Is there anything I can do to find out where the problem lies? Yves.
  12. Is there any way I can use as much network bandwidth as possible for a minute or so, so that I can verify the network ability? So far, my ADSL connexion has been fast, and I've frequently seen a download go at 1MB/s (8Mb). Since 2 days ago however, network seems to be slow: streaming radio is mostly broken, ganttproject-2.0.2-1mer.noarch.rpm is currently being downloaded with wget at 1KB/s on average, when not stalled... and I've disabled images in FF. Could you give me some directions on what to execute, and what to look at? Yves.
  13. Thanks neddie! I've just tried it on the 'Arrays' toolbar, and it does seem to work; I'll see if it keeps working after I've closed and reopened OOO. :) Yves.
  14. I've known about this distro for a long time, yet I'm satisfied with Mdv so I never tried. However, I like the concept a lot, and since I've read about it, I apply this concept with the packages I compile from source. For example: I have program A, version 1.2.3 ,to install: # cd /usr/local/src # tar -xzf A-1.2.3.tgz && cd A-1.2.3 # mkdir /opt/A-1.2.3 # ./configure --prefix=/opt/A-1.2.3 && make && make install Whenever I want to "enable" this program, I run lndir /opt/A-1.2.3 /usr/local , and when I want to "disable" this program, I run ulndir /opt/A-1.2.3 /usr/local (lndir and ulndir are two scripts I wrote). Removing a program is simple: rm -rf /opt/A-1.2.3 It is great! An application/library == A directory. It is simple and effective. Yves.
  15. Yes but what if I don't want it? I often work on my laptop (800x600) and on this screen, an additional bar takes too much space. Besides, the whole window is redrawed each time the bar appears or disappears because the bar changes the geometry of the page area... Yves.
  16. Mdv 2007 uses the freedesktop.org standard for menus whereas previous versions used the Debian "menu" system. Quite a number of packages have no .desktop (freedesktop.org) file yet, but they have a /usr/lib/menu (Debian) file. You can copy an existing .desktop file from /usr/share/applications from an application of the same category (mm/sound), into /usr/local/share/applications/rosegarden.desktop and adapt this file according to the content of the Debian-system file (find it with: rpm -ql rosegarden | grep /menu/) Yves.
  17. Overall, I'm impressed with OO2: it's much faster, and cleaner. Besides, I need this version for work, because no other word-processor (not even OO1) can read some DOC files I have. BUT I find OO2 is just unusable !!! Increadible, isn't it? Nice looking but unusable. Whenever I move the cursor on a line with a bullet, the bullets-toolbar opens, and focus shifts to it for example. My question: Is there any way I can dumb Open Office down, so that it does not do anything that I did not ask? I want it to behave like Abiword: I type words, and the words appear, I move around and the cursor changes place, just that. Is that too much to ask? Thanks in advance. Yves.
  18. AFAIK, the /etc/fstab entry has priority, hence the /mnt/cdrom for those who have this line in the file. If no line in the /etc/fstab mentions the removable device, then the mount point is automatically computed from the information given by dbus/hal. Yves.
  19. I come a little late into the discussion. The best way I've found to share files is to use the s bit on directories, and change the default umask. All my users who share files are in the same primary group (let's say "GROUP"), and all have the default umask "007". My shared directory is owned by the same group (the user does not matter) and has these permissions: 2770. Now all directories and files created inside automatically have the same group as the shared directory (thanks to the 2 in the mode) and the right permissions (thanks to the users' umask). That being said, drakperm could come in handy because some applications don't follow the umask (I consider this a bug). Yves.
  20. Hum... Nothing interesting in this list... Good luck then :( Yves.
  21. Sorry I won't be able to help you further. It seems strange to me that there's no module related to ACPI because on my "salon" PC, there's one for the power button, one for the battery (generic module; I don't have a battery), and so on. Yet acpi(d) is definitely reported to be running, so... Just in case, try and run this (as root): find /lib/modules/$(uname -r)/ -iname "*acpi*" -print Yves.
  22. Any particular reason for that? Unless things changed inside Windows, Windows stores local time in the hardware. At boot or runtime, if it detects that a change of time is necessary, then it changes it, and stores the new local time in the hardware. Unix normally stores GMT/UTC time in the hardware. Local time is computed based on the timezone (TZ) and the GMT. This permits each user to have their own timezone preference (especially important in case of a server), and thus their own local time. Thanksfully, Linux is now (since a long time) able to deal with Windows' way of storing time by doing the same. You're lucky! Here in France, we have no normal time!At WW1 (IIRC, or is it WW2?), the German imposed their clock on the French, even though we are in the same geographical timezone as the English. Hence winter time is Germany's winter time: GMT+1 (one zone East of Greenwhich). In summer, we shift the time by one more hour, making that GMT+2; at the time this was decided (70'), it supposedly was to do savings on electric power. Yves.
  23. I know next to nothing to those issues, but I guess it is related somehow to ACPI not being active. Can you run the following commands as root: chkconfig --list | grep -i acpi lsmod | grep -i acpi Yves.
  24. Wow ianw1974, I'm very impressed at the rate at which you learn this all ! This is a very usefull tip you give us. You'll be a guru soon, or aren't you one already ;) Yves.
  25. Welcome on board :) I think the text you see is from the boot-loader, which is in the Master Boot Record of the primary disk, hence indeed a little "hidden". I don't have experience with this problem, but you should find something by looking for "restore windows MBR" here or on Google. Good luck! Yves.
×
×
  • Create New...