Jump to content

eroica

Members
  • Posts

    128
  • Joined

  • Last visited

Everything posted by eroica

  1. thanx for the input but yeah i have all updates added & installed
  2. I'm sorry what do you mean by that. All I have is Ksysguard running monitoring the cpu temp. it moderates between 54-65 C. At least I assume its giving me temp in centigrade. Also i've never noticed an option on throttling down cpu in bios. where did u find it and what did you set yours to.thanx...
  3. hello, well i have spring 2007.1 installed and am generally impressed. I have one problem that is very aggravating. My mouse and keyboard will freeze at random times and I will have to do a power restart. This problem goes back to 2007.0 edition. It can sometimes be 15 mins after I boot or 4hrs. The only thing i notice is that the majority of the time I have MCC and software updates running or have run earlier in session. It may be my imagination but this problem seems to have started when i upgraded the original rpmdrake from 2007.0 I have looked in syslog & messages but nothing seems abnormal. I thought maybe it was a problem w/the X server and was hoping that the upgrade is a to Spring would solve this trouble. But no luck. I've run a memory test and that came out ok. The fact that it can happen 10mins or 4hrs into a session would seem to rule out heat. I have this laptop dual booting w/XP and that does not experience any problem. Any suggestions on where to look would be most helpful. I would like to stick w/Mandriva if I can get this problem solved. Here is a readout of dmesg; dmesg Linux version 2.6.17-13mdvlegacy (rtp@octopus.mandriva.com) (gcc version 4.1.2 20070302 (prerelease) (4.1.2-1mdv2007.1)) #1 SMP Fri Mar 23 19:05:24 UTC 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 00000000000eee00 (reserved) BIOS-e820: 00000000000eee00 - 00000000000ef000 (ACPI NVS) BIOS-e820: 00000000000ef000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001eff0000 (usable) BIOS-e820: 000000001eff0000 - 000000001f000000 (ACPI data) BIOS-e820: 000000001f000000 - 0000000020000000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 495MB LOWMEM available. On node 0 totalpages: 126960 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 122864 pages, LIFO batch:31 DMI 2.3 present. ACPI: RSDP (v000 TOSHIB ) @ 0x000f0090 ACPI: RSDT (v001 TOSHIB 750 0x00970814 TASM 0x04010000) @ 0x1eff0000 ACPI: FADT (v002 TOSHIB 750 0x00970814 TASM 0x04010000) @ 0x1eff0054 ACPI: BOOT (v001 TOSHIB 750 0x00970814 TASM 0x04010000) @ 0x1eff002c ACPI: DSDT (v001 TOSHIB 1400 0x20020410 MSFT 0x0100000a) @ 0x00000000 ACPI: PM-Timer IO Port: 0xee08 Allocating PCI resources starting at 30000000 (gap: 20000000:dff80000) Built 1 zonelists Kernel command line: BOOT_IMAGE=Mandriva_2007.1 root=/dev/hda5 resume=/dev/hda6 splash=silent vga=788 bootsplash: silent mode. Local APIC disabled by BIOS -- you can enable it with "lapic" mapped APIC to ffffe000 (013ea000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 2048 (order: 11, 8192 bytes) Detected 1195.286 MHz processor. Using pmtmr for high-res timesource Console: colour dummy device 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 497928k/507840k available (2241k kernel code, 8788k reserved, 757k data, 228k init, 0k highmem, 0k BadRAM) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 2393.03 BogoMIPS (lpj=4786066) Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 16k freed checking if image is initramfs... it is Freeing initrd memory: 719k freed ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. ACPI: setting ELCR to 0200 (from 0a00) CPU0: Intel Mobile Intel® Celeron CPU 1200MHz stepping 04 SMP motherboard not detected. Local APIC not detected. Using dummy APIC emulation. Brought up 1 CPUs migration_cost=0 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfe5b4, last bus=5 Setting up standard PCI resources ACPI: Subsystem revision 20060127 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 PCI quirk: region ee00-ee3f claimed by ali7101 ACPI PCI quirk: region ef00-ef1f claimed by ali7101 SMB Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: Power Resource [PFAN] (off) Linux Plug and Play Support v0.97 © Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 12 devices PnPBIOS: Disabled PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: f7f00000-fdffffff PREFETCH window: 3c000000-3c0fffff PCI: Bus 2, cardbus bridge: 0000:00:10.0 IO window: 00001400-000014ff IO window: 00001800-000018ff PREFETCH window: 30000000-31ffffff MEM window: 32000000-33ffffff PCI: Bus 6, cardbus bridge: 0000:00:11.0 IO window: 00001c00-00001cff IO window: 00002000-000020ff PREFETCH window: 34000000-35ffffff MEM window: 36000000-37ffffff PCI: Bus 10, cardbus bridge: 0000:00:11.1 IO window: 00002400-000024ff IO window: 00002800-000028ff PREFETCH window: 38000000-39ffffff MEM window: 3a000000-3bffffff PCI: Setting latency timer of device 0000:00:01.0 to 64 PCI: Enabling device 0000:00:10.0 (0000 -> 0003) ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 PCI: Enabling device 0000:00:11.0 (0000 -> 0003) ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:11.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 PCI: Enabling device 0000:00:11.1 (0000 -> 0003) ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:11.1 -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 8192 (order: 4, 65536 bytes) TCP: Hash tables configured (established 16384 bind 8192) TCP reno registered Simple Boot Flag at 0x7c set to 0x1 apm: BIOS version 1.2 Flags 0x02 (Driver version 1.16ac) apm: overridden by ACPI. audit: initializing netlink socket (disabled) audit(1177593269.212:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered Activating ISA DMA hang workarounds. vesafb: framebuffer at 0xfc000000, mapped to 0xdf880000, using 3750k, total 16384k vesafb: mode is 800x600x16, linelength=1600, pages=16 vesafb: protected mode interface info at c000:780a vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 189894 bytes,<6>...found (800x600, 189846 bytes, v3). Console: switching to colour frame buffer device 93x31 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ALI15X3: IDE controller at PCI slot 0000:00:04.0 ACPI: PCI Interrupt 0000:00:04.0[A]: no GSI ALI15X3: chipset revision 195 ALI15X3: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xeff0-0xeff7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xeff8-0xefff, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: IC25N030ATCS04-0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: TOSHIBA DVD-ROM SD-R2102, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 58605120 sectors (30005 MB) w/1768KiB Cache, CHS=58140/16/63, UDMA(33) hda: cache flushes not supported hda: hda1 hda2 < hda5 hda6 hda7 > PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 TCP bic registered NET: Registered protocol family 1 Using IPI No-Shortcut mode input: AT Translated Set 2 keyboard as /class/input/input0 ACPI wakeup devices: USB1 ASND VIY0 VIY1 LAN LID ACPI: (supports S0 S3 S4 S5) BIOS EDD facility v0.16 2004-Jun-25, 1 devices found Freeing unused kernel memory: 228k freed EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. input: PS/2 Mouse as /class/input/input1 input: AlpsPS/2 ALPS GlidePoint as /class/input/input2 kjournald starting. Commit interval 5 seconds EXT3-fs: hda5: orphan cleanup on readonly fs ext3_orphan_cleanup: deleting unreferenced inode 751439 ext3_orphan_cleanup: deleting unreferenced inode 751437 ext3_orphan_cleanup: deleting unreferenced inode 751435 ext3_orphan_cleanup: deleting unreferenced inode 407910 EXT3-fs: hda5: 4 orphan inodes deleted EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. ts: Compaq touchscreen protocol output usbcore: registered new driver usbfs usbcore: registered new driver hub ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKG] -> GSI 11 (level, low) -> IRQ 11 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:02.0: irq 11, io mem 0xf7eff000 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected usb 1-3: new low speed USB device using ohci_hcd and address 2 usb 1-3: configuration #1 chosen from 1 choice usbcore: registered new driver hiddev input: MosArt Optical Mouse as /class/input/input3 input: USB HID v1.10 Mouse [MosArt Optical Mouse] on usb-0000:00:02.0-3 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver usbcore: registered new driver usbmouse drivers/usb/input/usbmouse.c: v1.6:USB HID Boot Protocol mouse driver Toshiba System Managment Mode driver v1.11 26/9/2001 Non-volatile memory driver v1.2 Linux agpgart interface v0.101 © Dave Jones agpgart: Detected ALi M1644 chipset agpgart: AGP aperture is 64M @ 0xf0000000 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 Yenta: CardBus bridge found at 0000:00:10.0 [12a3:ab01] Yenta: Enabling burst memory read transactions Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:00:10.0, mfunc 0x01000002, devctl 0x60 Yenta: ISA IRQ mask 0x0000, PCI irq 11 Socket status: 30000010 ACPI: PCI Interrupt 0000:00:11.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 Yenta: CardBus bridge found at 0000:00:11.0 [1179:0001] Yenta: ISA IRQ mask 0x04b8, PCI irq 11 Socket status: 30000007 pccard: PCMCIA card inserted into slot 0 cs: IO port probe 0x100-0x3af: excluding 0x378-0x37f cs: IO port probe 0x3e0-0x4ff: excluding 0x408-0x40f 0x480-0x48f 0x4d0-0x4d7 cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0xc00-0xcf7: clean. cs: IO port probe 0xa00-0xaff: clean. cs: IO port probe 0x100-0x3af: excluding 0x378-0x37f cs: IO port probe 0x3e0-0x4ff: excluding 0x408-0x40f 0x480-0x48f 0x4d0-0x4d7 cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0xc00-0xcf7: clean. cs: IO port probe 0xa00-0xaff: clean. cs: memory probe 0xa0000000-0xa0ffffff: clean. pcmcia: registering new device pcmcia0.0 orinoco 0.15 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al) orinoco_cs 0.15 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al) eth0: Hardware identity 0005:0004:0005:0000 eth0: Station identity 001f:0001:0008:000a eth0: Firmware determined as Lucent/Agere 8.10 eth0: Ad-hoc demo mode supported eth0: IEEE standard IBSS ad-hoc mode supported eth0: WEP supported, 104-bit key eth0: MAC address 00:02:2D:58:5F:29 eth0: Station name "HERMES I" eth0: ready eth0: orinoco_cs at 0.0, irq 11, io 0x0100-0x013f ACPI: PCI Interrupt 0000:00:11.1 -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 Yenta: CardBus bridge found at 0000:00:11.1 [1179:0001] Yenta: ISA IRQ mask 0x04b8, PCI irq 11 Socket status: 30000007 cs: IO port probe 0x100-0x3af: excluding 0x378-0x37f cs: IO port probe 0x3e0-0x4ff: excluding 0x408-0x40f 0x480-0x48f 0x4d0-0x4d7 cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0xc00-0xcf7: clean. cs: IO port probe 0xa00-0xaff: clean. eth1: New link status: Connected (0001) eth1: New link status: Disconnected (0002) device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com loop: loaded (max 8 devices, max 1 partitions per device) EXT3 FS on hda5, internal journal Adding 1028120k swap on /dev/hda6. Priority:-1 extents:1 across:1028120k kjournald starting. Commit interval 5 seconds EXT3 FS on hda7, internal journal EXT3-fs: mounted filesystem with ordered data mode. hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 189894 bytes,<6>...found (800x600, 189846 bytes, v3). bootsplash: status on console 0 changed to on ACPI: AC Adapter [ADP1] (on-line) Netfilter messages via NETLINK v0.30. ACPI: Battery Slot [bAT1] (battery present) ip_conntrack version 2.4 (3967 buckets, 31736 max) - 224 bytes per conntrack ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID] ACPI: Fan [FAN] (off) Using specific hotkey driver ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Thermal Zone [THRM] (67 C) Removing netfilter NETLINK layer. toshiba_acpi: Toshiba Laptop ACPI Extras version 0.18 toshiba_acpi: HCI method: \_SB_.VALD.GHCI ACPI: Video Device [VGA_PCI1] (multi-head: yes rom: yes post: no) NET: Registered protocol family 10 lo: Disabled Privacy Extensions ADDRCONF(NETDEV_UP): eth1: link is not ready IPv6 over IPv4 tunneling driver process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.lo.base_reachable_time; Use net.ipv6.neigh.lo.base_reachable_time_ms instead. PCI: Enabling device 0000:00:06.0 (0000 -> 0003) ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11 NET: Registered protocol family 17 e100: Intel® PRO/100 Network Driver, 3.5.14 e100: Copyright© 1999-2006 Intel Corporation ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 e100: eth0: e100_probe: addr 0xf7efe000, irq 11, MAC addr 00:08:0D:84:43:02 ADDRCONF(NETDEV_UP): eth0: link is not ready e100: eth0: e100_watchdog: link up, 10Mbps, half-duplex ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready eth1: New link status: Connected (0001) eth1: New link status: Disconnected (0002) eth0: no IPv6 routers present ip_tables: © 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. ip_conntrack version 2.4 (3967 buckets, 31736 max) - 224 bytes per conntrack ip_conntrack_pptp version 3.1 loaded ip_nat_pptp version 3.0 loaded ClusterIP Version 0.8 loaded successfully ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>. http://snowman.net/projects/ipt_recent/ netfilter PSD loaded - © astaro AG IFWLOG: register target bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 14222 bytes, v3). bootsplash: status on console 0 changed to on bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 14222 bytes, v3). bootsplash: status on console 1 changed to on bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 14222 bytes, v3). bootsplash: status on console 2 changed to on bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 14222 bytes, v3). bootsplash: status on console 3 changed to on bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 14222 bytes, v3). bootsplash: status on console 4 changed to on bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 14222 bytes, v3). bootsplash: status on console 5 changed to on thanx
  4. thanx but I didnt upgrade I did a new install from the One disk. according to uname -r 2.6.17-13mdvlegacy Is that not the latest kernel? I only did a cursory look last night @ update but I didnt notice a later kernel. Anyhow i issued the following to fstab and am working ok. /dev/fd0 /media/floppy auto rw,noauto,user,sync 0 0 /dev/cdrom /media/cdrom auto rw,noauto,user,exec 0 0 but still. how can we expect to grow Linux when a simple install disables floppy & cd? I dont think we can expect the ordinary user to start appending the fstab or even know what that is...
  5. hello, am having couple of problems w/spring 2007. one being that I cant mount floppy or my cd-rw. i get error about no entry in either fstab or mtab and sure enough I looked and there isnt. When I updated from 2007.0 it seems it should have made those entries? Anyway are we still using using the fstab for mounting or is there something else that took its place? also what would be the appropriate entries.thanx...
  6. hello, Just updated to MDV One spring 2007. One problem i'm having is the address book in kmail will not open. I click on it in menu and nothing happens. Anybody have any ideas on why this is happening. I googled and visited kontact web site but didnt see anything there pertaining to this problem.any help appreciated thanx
  7. what i did was download klamav 0.41 from rpmnet. I found a post that advised that clam .9x's config file was somehow incompatible w/less then klamav .41. once downloaded & installed can now update klamav. it would be nice if people updating the repos would check simple things like keeping clam & klamav in sync....
  8. hello, i've just updated klamav via MCC to klam-av-0.32-4mdk and clam 0.90-1.1mdv2007.0 but now when i try to update database files using Update Now button i get a "Config file error" message. I dont see any config file in my .klamav didrectory. Anybody run into a similar problem since updating? Googled error message but could find no results that helped. thanx
  9. thanx. I found trouble. Had to goto kcontrol>appearence&themes>fonts & just select any other font size and apply change.Then my text on toolbar and all text in menu's & dialog boxes appeared normal again.
  10. hello, i really hosed my Firefox since trying to change themes to Embassy. Whenever i launch FF i get no File,Edit etc toolbar. its all scrunched. When I launch FF from terminal get numerous "Gtk- Warning ** Default font does not have a family set" & also "font does not have a positive size." I tried reinstalling FF still no good. I guess I hosed something w/trying that embassy theme which didnt display right.I've gone back to my original theme but FF is still not displaying correctly. Any help on what I need to do to get this right would be much appreciated. I'm running MDV 2007.0 w/FF2.02 thanx
  11. to be honest i'm having so many stability problems that I just want to always run old_rpmdrake. And it simplifies maintenance. I know if I want to do something/anything I can do it from MCC.And to me the less clutter on the desktop the better...
  12. thanx but that's not exactly what i am experiencing. I have no trouble adding repo's or accessing and updating. It's that my install has become very unstable since i updated to new rpmdrake v3.3. i will be in MCC doing a systemupdate or looking for packages and a good 50% of the time while i'm in there my cursor just disappears and keyboard totally locks up. cant ctl-alt-f1 or anything. have to do a hard reset which i hate doing to bring system back up. I want revert back old_rpmdrake to see if problem persists. I've looked in system logs but see nothing that stands out. Is there any logs for rpm i could look at. As for getting old_rpm to work w/MCC i'm thinking of renaming all old_rpm binaries in /usr/bin to the new rpmdrake binary names. Do u think this will force MCC to bring up old_rpmdrake....
  13. hello, I've been experiencing problem w/new rpmdrake package causing my laptop to freeze. I reinstalled old old_rpmdrake package but it is not used when using MCC. I tried removing the updated rpmdrake but urpmi wants to remove old_rpmdrake also. Any suggestions on howto make old_rpmdrake open by default in MCC? Has there been anything about the new rpmdrake causing troubles. I looked in the latest errata but saw nothing.thanx.....
  14. ok thanx. i'll try to be patient w/an update on rpmdrake. any idea when mandriva firefox 2.0 will be released?
  15. i was hoping to avoid going backward in installing old-rpmdrake. If this keeps up i may have to. i'm not going to end up in some dependency hell by doing ths am i?
  16. i'm wondering w/what I found w/listing packages and what u explained are people supposed to leave update unchecked in Media Manager and add all the update repo's instead. But that seems a little complicated to get updates...
  17. ok thanx. the "release" repo's are they equivalent to repo's i've been using from easyurpmi? and the "updates" repo's are they equivalent to checking the update box in media manager and backports is akin to thac's repo's? how about the use of backports. i hosed the printing function on 2006 by using one of thac's updated packages. i really dont want that again.And thanx Mhn. by not checking updates box in Media Manager for my sources i now get listings for all available packages. I hope that isnt considered the normal behavior for this new rpmdrake....
  18. thanx. that is my problem. when I uncheck updates in media manager i get all installable packages im sorry. what exactly is the add.urpmi command?More specifically what is the exact media address.
  19. no unfortunately i get no results back when i do a search b4 installing kaffeine. once i installed kaffeine using urpmi then it shows as an installed package. i'm sorry but do you mean i can add it like any other repo?
  20. how does one get access to the cooker or /backports rpmdrake package?
  21. not to belabor the point but if people @ mandriva knew rpmdrake was broke why wasnt the old version used and then offer the new rpmdrake as an update once bugs were worked out? And why is there no mention of this trouble in the errata or release notes.
  22. got to tell u i've been trying opensuse 10.1. Their package manager had a similar problem w/Yast. I think its more of the arms race mind set of constant upgrades. If you have a release thats a year old its obsolete seems to be the CW w/linux distro's now. And we are paying the price w/these not ready for prime time releases. So when u say there are choices yes there are literally hundreds. but when Suse & Mandriva,two of the most popular and main stream distro's, have problems like these and are released anyway to community then we have serious problem that needs to be addressed...
  23. i hope some of the people @ mandriva see this post. i will also post on mandriva forums. I mean everbody is always complaining in the linux community about how linux isnt more widely adopted. I'll tell u why. Cause they let stuff like this out the door and it "simply dont work". say what u will about Vista development time but the softies wouldnt have shipped w/this kind of problem. and if they did people would crucify them. but w/linux its ok. we'll never get above 1% penetration doing releases like this. Dont be a slave to the mentality that u have to keep the release dates every 6-9 months. Let fedora do that. we like Mandriva cause its stable and user friendly...
  24. thanx i found your thread. the way rpmdrk is now working is simply not acceptable. The big selling point w/mandriva over RH or SuSe was that it is more user friendly. Now you're telling people to use a CLI package manager on probably the most important feature in a distro non-technical people are looking for ie ease of program installation. Boy somebody really dropped the ball w/this. I'm having a difficult time and i've been using mdv since 9.1.
  25. oh man that is not good. i used to like to do a list and see what was available. Is there any other graphical installer people have been using instead of rpmdrake?
×
×
  • Create New...