Daveleh

Thanks for responding. As it is I've cured the problem using the exact same program. When I had finished setting up my package sources, using easyurpmi ( http://urpmi-addmedia.org/ ). I searched for Synaptics and found both Ksynaptics and gtsynaptics. Thanks anyway

can anyone give any pointers on how to turn off tap/clicking on the touchpad. I've been able to do this in Windows but can't find the setting in ML10.1 My laptop is a fijitsu siemens Amilo Pro V 7010 Thank for help in adavnce

Check out this site: http://ooextras.sourceforge.net/downloads/english/

I take it that you have set the defaults in the Options? If not then try this: 1. Start OpenOffice 2. Go to Tools menu and select Options 3. In the list on the left hand side of the dialogue box click on Load / Save then click on General. 4. In the options on the right hand side, down near the bottom, is the standard file format selector. 5. Select each doc type in turn and then change the 'Always save as' option to read the OpenOffice.org format. 6. Click 'OK' The only thing I can think of is that you selected the MSOffice options during the installation procedure. If you have any further problems can I suggest that you send them to the OpenOffice mailing list at http://www.openoffice.org/mail_list.html. That way you are more likely to get a quick response from one of thousands of contributors and also developers. Let me know if this has helped.

There are two ways to install OpenOffice. Either as a network install or a stand alone install. A network install saves on disk space where more than 1 login is going to use the program. To install for a network: 1. Download or otherwise obtain the latest version which is 1.1.0, this will be a tar.gz file 2. Extract the tar.gz file to a directory of your choice. 3. Open a console, su to root and then cd to the directory that the tar.gz file was extracted to. In this directory will be a file called setup. 4. run this file by typing ./setup -net 5. follow the dialogue boxes. 6. Once installed logout as root and then close the console. Now each individual user needs to install the necessary files in their home directory 1. Log in as the user who wants to install OOo and locate the directory that the program was installed into in the steps above. You can either use the console or Konqueror. 2. run setup (this time without the -net suffix) 3. Select Workstation Install 4. Follow the dialogue boxes. This will install the minimum amount of files in each users Home directory Once installed each user can then, if they want to, obtain and install OOQuickstarter. This puts an icon in the tray to start OOo without going through the Kmenu. If you want to install OOo as a single user then: 1. Extract the tar.gz file to wherever you want 2. Locate and run setup, using a console or Konqueror 3. Follow the dialogue boxes. If you then have problems using OOo I would suggest submitting your question to the users@openoffice.org mailing list located at http://www.openoffice.org/mail_list.html There are many helpful people on this list including Sun staff, developers and book publishers

Why not just download realPLayer for Linux. It works fine on my machine? Can't locate the URL at the mo as our corporate site has it blocked.

I thought I had but I'll check tonight Ok, everything looks fine now. As PMPatrick suggested I downloaded the outstanding DrakX updates and I can now add users as before. I still get a very minimal Kmenu as default but at least I get the Edit Menu option when I right click now and so I can relaod the system menu and get back to normal. Thanks for your help and advice B)

I thought I had but I'll check tonight As I said originally, I don't get the Menu Edit option when I right click over the Kmenu. Also I don't get any shell icons offered, no shells offered in the menu nor the Run Command option. I have since noticed that if I try to click on the CD icon on the desktop I get an error message in a box titled Cervisia and the error message says something about not being CVS. I can't remember exactly what it says at the moment and I am not at my Linux PC. Everything works fine for the original user.

I had a similar problem using my camera in ML9.1. I have a Fuji Finepix 401 and nothing I did enabled me to mount it, either with or without the docking cradle. In the end I resorted to buying a smartmedia adaptor, called Zio. This worked as soon as I connected it with a card in. However, I have since upgraded to ML9.2 and now my camera works perfectly both with and without the cradle. I would suggest that you consider one or the other of these options. Hope that helps in some way B)

Hi, I am having problems adding users to my system and I was wondering if anyone can tell me where I'm going wrong. Initially I only had myself as a user (as well as Root, obviously) but I want to add my daughter. I went to MCC - System - Usedrake clicked on Add User and entered the relevant details in the fields. I then logged out as myself and relogged in under her login and went through the First Time wizard, selecting KDE default and setting her email client as Evolution. Unfortunately this is where the problem starts. When I try to double click on her home icon I get a short burst of activity in the Panel but nothing opens. Then if I go to the Kmenu I only see a very basic layout of 6 or 7 categories with only item in each category. I get no config icons, I get no Konqueror icons and when I right click over the Kmenu icon I get no Edit Menu option. Has anyone come across this and if so what have i done wrong or what do I need to do? BTW, I have tried deleting this new user several times with the same effect.

Problem now solved :D I used urpmi to install videolanclient and that installde a bunch of other stuff including libdvdcss2 and libdvdplay. Now all three video players work OK except that the display in their individual windows as very bright. The main screen is fine though. I obviously need to play around and set contrast & brightness for the programs but so far have only found that in Mplayer which has an equaliser but which resets to default every time I close it down. I'll keep you informed of the progress

Mine has a tendency to go freeze during the initial boot, whilst all the services get started and the (OK)'s get printed down the right hand side. The only thing I can do when this happens is remove power from the PC. Not been able to pinpoint exactly when it does it yet. I'll post more when I do :sad:

Here's a strange phenom .. phenom... phnom .. occurrence :P I have LibDVDread installed I have LibDVDnav installed I have LibDVDcss installed I have 3 video players available; Mplayer, Totem & Xine If I play one of my DVDs in Mplayer it plays fine, I don't get the on disk menu that enables me to choose scene, extras etc but it plays ok If I play the same DVD in Totem or Xine I get an error telling me that I am trying to play an encrypted DVD and in order to do so I need LibDVDcss installed Anyone come across this before?

Hi DragonMage, I missed this option as well, until I found the equivalent for the new layout. Near the top right hand corner of the screen is are a set of options as follows: MY Controls : X New Messages : View New Posts : My Assistant If you click on My Assistant another window pops up. In the section headed Show Me are the following options: The Moderating Team Todays Active Topics Todays Top 10 Posters Overall Top 10 Posters My Last 10 Posts Click on Todays Active Topics. This will display the messages in a similar format to the old layout. Above the messages, on the right, is an area called 'Show Me Active Topics Posted..' and then below this is a text box labelled 'From..' and below that a text box labelled 'Today..' followed by a button with two arrows on it. Drop down the option buttons for these two text fields, make your selection and then click on the button with the arrows on it. If anyone knows a quicker way then feel free to respond. :)

What worked :?: Getting Firebird compiled for xft or selecting a different font :?:

I feel a right divvy I have been trying to get my digital camera, a Fuji Finepix 401, to work for ages with no luck and resorted to buying a separate smartmedia card reader in order to download the pictures. However yesterday I was mooching around at home and came across the box it came in. When I picked it up something inside rattled. Investigation revealed a second USB cable. This cable, rather than connecting the docking cradle, connects to the small USB socket on the side of the camera. So I plugged the cable in to the computer then into the camera and then turned the camera on and bingo up came the icon for /mnt/removable. :? So, if anyone out there is looking at buying this camera, although it has been superceded by now no doubt, they can take heart that it will work with 9.1 but without the cradle which is no big deal.

So have I

Thanks for replying so quickly. It says -rwxr-xr-x 1 root root 457264 Mar 12 2003 /usr/X11R6/lib/libGL.so.1.2*

Good Evening, I am trying to install a windows program using Wine and am getting an werror message. Can anyone explain what I need to do please. The program I am trying to install is Family Tree Maker 9.0 (FTM) I have installed Wine20030618 and have loaded the FTM Cd into the CD drive. Then I opened a shell and typed: wine /mnt/cdrom2/autorun.exe This produces the following error message: Loading required GL library /usr/X11R6/lib/libGL.so.1.2 FIXME:pthread_cond_init [me@localhost me]$ Loading required GL library /usr/X11R6/lib/libGL.so.1.2 wine: Unhandled exception, starting debugger... err:seh:start_debugger Couldn't start debugger ("debugger/winedbg 12 144") (2) Read the Wine Developers Guide on how to set up winedbg or another debugger Anyone have any suggestions

S'funny, I'm currently using OO1.0.3 and I've always had to use swriter etc to load the programs, and this has been the case for every previous version I have installed and used.

Just thought I'd let everyone know about a mouse that I bought recently. I was on holiday in the UK recently and whilst there I popped into a local computer store and purchased a wireless mouse. It's labelled as a Mercury mouse and is produced by a company called Kobian. It comes with the usual Windows driver disk and a two page, A5 instruction sheet telling you how to load the driver and setup the buttons. No mention of Linux was made on the box only all the Windows variants and I bought it on the off chance that it would work. Once home I removed my existing PS2 mouse, plugged in the receiver, powered up and lo and behold it worked first time :) It has two extra buttons, one on each side, not sure how to program those yet though. Just thought I'd pass that on in case anyone else was looking at one.

I don't think it's supposed to, but I may be wrong. I thought it was only supposed to give a command prompt. According to the PDF docs: /quote Mindi Linux creates a set of boot/root floppy disk images that will let you perform basic system maintenance on your Linux distro. The principle virtues of Mindi's boot disks are the fact that they contain your kernel, modules, tools and libraries. /unquote

If I remember correctly from when I first started using Mondrescue that was all I did, created the Mindi disk, rebooted, got the boot: prompt which proved Mindi worked, then removed the CD, rebooted and proceeded to backup my system. Once this was completed I rebooted with my backup CD, typed compare at the boot: prompt and waited for the two systems, my original and the backup, to be checked against each other. The docs tell you that some files won't match but you can check those out in a logfile. HTH

Tried typing <linux> w/ no brackets of course and no luck. Tried lang=us like Knoppix uses no luck either. I cannot seem to find any instructions in the docs or online concerning how to proceed at the boot: line. Can someone please point me to a man page or instructions on how this works? TIA! Check out the docs, which can be found as a pdf file at http://www.chem.vu.nl/~stol/Mondo-Rescue-M...Linux-HOWTO.pdf . In Chapter 2 - Quick Start it says: /quote Reboot your system with the created Mindi CD, with the BIOS set to do boot from CD. If the result is a command line in 'Expert' mode, your system checks out. Remove the CD and reboot your system /unquote Hope that helps

I use Moneydance myself and find it more than adequate for my home needs. Download the trial version from www.moneydance.com , play around with it using test or partial real data and then if you like it purchase the activation code. The trial version is the full version restricted to , I think, 100 entries. If you get stuck subscribe to their mailing list and just ask, the developer Sean Reilly regularly make an appearance so questions can be posed to him. HTH