bsyuni

How can I get more infomation for your job? Thank you in advance.

Thank you. The kernel that I am running is 2.6.11-6mdksmp I check the kernel, It compiled 64Ga memory with 8 cpus support.

Thank you for your reply. I have no idea for the mobo. It is Dell Optiplex GX620 model.

I recently upgrade my memory form 2 Ga to 4 Ga. They are detected by CMOS but I can see only 3.6Ga under Mandriva 2005 LE. How can I use 4 Ga memory? [yuni@Dell run5_1]$ free total used free shared buffers cached Mem: 3626696 3444700 181996 0 10988 444600 -/+ buffers/cache: 2989112 637584 Swap: 1100412 35136 1065276 Thank you in advance.

Mandriva 2005 works with intel D chips without any tune up. It detect by itself.

My simulation program uses 100% cpu resource. Due to the dual core, I can run two cases simultaneously. When I run one simulation case than it works only 50% like you said. I attached my screen shot.

I have been using MDK 10.0 O.E. with Windows 2000 in my desktop. Recently I purchase 160Ga new HDD which is now master HDD. It is partitioned 15Ga, 100Ga, 20Ga and 25Ga. I installed windows 2K in 15Ga. It works well. I install MDK 10.1 O.E. in the second old HDD which is hdb. Well, I see the error message as follows, "The hda partition table is corrupted, you can re-partitioning..." "you will lost your data." I do not want to lost win2K partition so that I neglect the message and choose partition to install in hdb. All packages installed well. and I choose hdb for grub again. After all successful installation I reboot it. There is no way to boot MDK at all. How can I solve this problem?

The problem has been solved. It had a problem with samba 3.0.2 as Polemicz mentioned before. After upgrade samba 3.0.6 it just start to work. Thank you for your helping, Qchem and Polemicz.

I have installed HP LaserJet 6MP which is a proper driver. I did not installed gimp-print. Do I need to install gimp-print?

I changed it form MDKGROUP to WORK in /etc/samba/smb.conf workgroup = WORK Still I can not use the printer. Anyway, I can see the shared printer and files but still I can not use the printer. smbclient -L WORK-ENRIQUE Password: Domain=[WORK-ENRIQUE] OS=[Windows 5.0] Server=[Windows 2000 LAN Manager] Sharename Type Comment --------- ---- ------- HPLaserJet Printer HP LaserJet 6P/6MP - Standard IPC$ IPC Remote IPC print$ Disk Printer Drivers ADMIN$ Disk Remote Admin C$ Disk Default share Domain=[WORK-ENRIQUE] OS=[Windows 5.0] Server=[Windows 2000 LAN Manager]

I hope this is an answer for your question. smb://WORK/WORK-ENRIQUE/HPLaserJet smb://WORK-ENRIQUE/HPLaserJet smb://myUserName:myPassWd@WORK-ENRIQUE/HPLaserJet smb://myUserName:myPassWd@WORK/WORK-ENRIQUE/HPLaserJet I tried all four one by one but it did not work at all. By the way, the NT workgroup is WORK.

Yes, I can ping the Window box.

How can I use a printer in the NT domain. Here is the situation. I have a printer connected with MS Windows 2000. I tried setup with mcc and setup looks fine. But I can not use the printer. So, I try to figure it out by myself step by step. The first step is make a sure samba connection. smbclient -L WORK-ENRIQUE It does not work so that I put WORK-ENRIQUE'S IP address in /etc/hosts and this time I put user name and workgroup, too. smbclient -L WORK-ENRIQUE -U myUserName%myPassWd -W WORK Domain=[WORK-ENRIQUE] OS=[Windows 5.0] Server=[Windows 2000 LAN Manager] Sharename Type Comment --------- ---- ------- HPLaserJet Printer HP LaserJet 6P/6MP - Standard IPC$ IPC Remote IPC print$ Disk Printer Drivers ADMIN$ Disk Remote Admin C$ Disk Default share But still I can not use the printer. Even though I can print out some ASCII text directly. echo -en "\rHello\r\f" | smbclient "//WORK-ENRIQUE/HPLaserJet" -c "print -" -N -U myUserName%myPassEd -W WORK Also I check /etc/cups/printers.conf and it looks fine. I also restart cups /etc/init.d/cups start firefox http://localhost:631 & In firefox Printer State: idle, accepting jobs. Looks still fine, doesn't it? But I put a test page for printing then, "Connection failed with error NT_STATUS_ACCESS_DENIED" hp-227 Test Page root 26k processing since It might be I do not have root account in Windows2000 box. Any suggestion will be helpful. in advance. [Qchem Edit - added solved to the title]

Hello everyone. :D I am using MDK 10.0 OE. I have a problem to setup permanently for emacs. The font size is too small for the 12.1' and 800X600 resolution of LCD. So far I have been changed the font to click left mouse button and shift so that I can have a font menu. After that I can choose right one. I choose courier >14 usually. Now I would like to make it as my permanent setting for emacs font. I tried to modify /usr/X11R6/lib/X11/app-defaults/Emacs file to proper font. I am not sure it was right one or not but nothing has been changed at all. Emacs*font: -*-fixed-medium-r-normal-*-*-140-75-75-*-*-* # Emacs*font: -*-fixed-medium-r-normal-*-*-160-75-75-*-*-* # Emacs*font: -*-courier-*-r-*-*-16-*-100-100-*-*-*-* emacs*foreground: Wheat emacs*background: DarkSlateGray emacs*region.attributeForeground: White emacs*region.attributeBackground: SteelBlue emacs*pointerColor: Orchid emacs*cursorColor: Orchid I tried the second and third line one by one. The first line is default. How can I possibly setup the font permanently? in advance.

I gave them xhost command as you mentioned above but I still have a same error message. I can connect tp to k2 which is another machine using ssh and run X based program. Therefore tp is fine but I do not have any idea what happen in res3 machine. It just suddenly happen. again.