Thanks for the reply !
The wacom device is indeed recognized ! That's why i think there should be a way getting this work...
---------------------------------------------------------------
This is what I get if I type "lsusb" in the terminal
Bus 001 Device 005: ID 056a:0093 Wacom Co., Ltd
Bus 001 Device 004: ID 08ff:1600 AuthenTec, Inc.
Bus 001 Device 003: ID 064e:a110 Suyin Corp.
Bus 001 Device 002: ID 04b4:6560 Cypress Semiconductor Corp. CY7C65640 USB-2.0 "TetraHub"
Bus 001 Device 001: ID 1d6b:0002
Bus 002 Device 002: ID 03f0:171d Hewlett-Packard
Bus 002 Device 001: ID 1d6b:0001
---------------------------------------------------------------
Yves I've played a little with the xorg.conf but with no success. I attach you my xorg.conf to have a look if you want. The problem is I think that the usbmouse tries to take control of the wacom, although in xorg.conf it is stated that the pen should use the "wacom" Driver, and it conflicts for some reason.
-------------------------------------------------------------------------------------------------
This is what i get from the MCC for the Wacom device under hardware information:
Bus PCI #: 1
PCI device #: 5
Vendor ID: 0x056a
Device ID: 0x0093
Sub vendor ID: 0x0000
Sub device ID: 0x0000
Features
Emulated wheel: No
Misc
Vendor: Tablet
Description: ISD-V4
Media class: Human Interface Device|Boot Interface Subclass|Mouse
Module: unknown
---------------------------------------------------------------------------------------
---------------------------------------------------------------------------------------
Xorg.Conf
# File generated by XFdrake (rev 234840)
Section "Extensions"
Option "Composite"
EndSection
# **********************************************************************
# Refer to the xorg.conf man page for details about the format of
# this file.
# **********************************************************************
Section "ServerFlags"
#DontZap # disable <Ctrl><Alt><BS> (server abort)
AllowMouseOpenFail # allows the server to start up even if the mouse does not work
#DontZoom # disable <Ctrl><Alt><KP_+>/<KP_-> (resolution switching)
EndSection
Section "Module"
Load "dbe" # Double-Buffering Extension
Load "v4l" # Video for Linux
Load "extmod"
Load "type1"
Load "freetype"
Load "glx" # 3D layer
EndSection
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"
Option "XkbOptions" "compose:rwin"
EndSection
Section "InputDevice"
Identifier "Eraser1"
Driver "wacom"
Option "Device" "/dev/input/event2"
Option "Type" "eraser"
Option "Mode" "Absolute"
Option "Tilt" "on"
Option "Presscurve" "0,0,100,100"
Option "USB" "on"
Option "Keepshape" "on"
Option "Threshold" "10"
EndSection
Section "InputDevice"
Identifier "Cursor1"
Driver "wacom"
Option "Device" "/dev/input/event2"
Option "Type" "cursor"
Option "Mode" "Relative"
Option "USB" "on"
Option "Speed" "3"
EndSection
Section "InputDevice"
Identifier "Stylus1"
Driver "wacom"
Option "Device" "/dev/input/event2"
Option "Type" "stylus"
Option "Mode" "Absolute"
Option "Tilt" "on"
Option "Presscurve" "0,0,100,100"
Option "USB" "on"
Option "Threshold" "10"
EndSection
Section "InputDevice"
Identifier "Pad1"
Driver "wacom"
Option "Device" "/dev/input/event2"
Option "Type" "pad"
Option "USB" "on"
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ExplorerPS/2"
Option "Device" "/dev/mouse"
EndSection
Section "InputDevice"
Identifier "SynapticsMouse1"
Driver "synaptics"
Option "SHMConfig" "on"
EndSection
Section "Monitor"
Identifier "monitor1"
VendorName "Plug'n Play"
ModelName ""
HorizSync 31.5-56
VertRefresh 60-69
# Monitor preferred modeline (60.0 Hz vsync, 49.4 kHz hsync, ratio 16/10)
ModeLine "1280x800" 71.11 1280 1328 1360 1440 800 803 809 823 -hsync -vsync
# TV fullscreen mode or DVD fullscreen output.
# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630
# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
# modeline generated by gtf(1) [handled by XFdrake]
ModeLine "1280x800_120" 181.21 1280 1376 1520 1760 800 801 804 858 -HSync +Vsync
# modeline generated by gtf(1) [handled by XFdrake]
ModeLine "1280x800_100" 147.89 1280 1376 1512 1744 800 801 804 848 -HSync +Vsync
# modeline generated by gtf(1) [handled by XFdrake]
ModeLine "1280x800_85" 123.38 1280 1368 1504 1728 800 801 804 840 -HSync +Vsync
# modeline generated by gtf(1) [handled by XFdrake]
ModeLine "1280x800_75" 107.21 1280 1360 1496 1712 800 801 804 835 -HSync +Vsync
# modeline generated by gtf(1) [handled by XFdrake]
ModeLine "1280x800_60" 83.46 1280 1344 1480 1680 800 801 804 828 -HSync +Vsync
# modeline generated by gtf(1) [handled by XFdrake]
ModeLine "1280x800_50" 68.56 1280 1336 1472 1664 800 801 804 824 -HSync +Vsync
EndSection
Section "Device"
Identifier "device1"
VendorName "nVidia Corporation"
BoardName "NVIDIA GeForce FX to GeForce 8800"
Driver "nvidia"
Option "DPMS"
Option "DynamicTwinView" "false"
Option "AddARGBGLXVisuals"
EndSection
Section "Screen"
Identifier "screen1"
Device "device1"
Monitor "monitor1"
DefaultColorDepth 24
Subsection "Display"
Depth 8
Modes "1280x800"
EndSubsection
Subsection "Display"
Depth 15
Modes "1280x800"
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x800"
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x800"
EndSubsection
EndSection
Section "ServerLayout"
Identifier "layout1"
InputDevice "Keyboard1" "CoreKeyboard"
InputDevice "Mouse1" "CorePointer"
InputDevice "SynapticsMouse1" "SendCoreEvents"
InputDevice "Cursor1" "SendCoreEvents"
Screen "screen1"
EndSection
---------------------------------------------------------------------------------------------------