SK_pt

Hi, I am going to buy a PCI wireless card, still checking compatibilities with many differnet ways, about prism45, ndiswrpaper, etc.etc. My question is, KDE have this application, cool application KWiFiManager, will this application work with ndiswrapper? I mean, will I have to setup and run it only in command line mode because it is a "emulation" of the driver from the manufacturer? thanks SK

Hi, I made a reinstallation of MDK 10.0 AMD64, when I now open the Konsole the line shows bash-2.05b$ (I can't even do l->L for listing files of folder, not even i can browser throught folders) It was supposed to appear [user@server user]# as usual anyway to put this back as it is supposed to be? Is this some kind of permissions? thanks, SK

Philips webcams are no longer supported in reent kernel versions PWC stopped being included in it,... so pay attention on that, it may work now, it may not wokr in next MDK version

i have another small problem software 32bits don't work in my MDK10 64bits,... so no KDETV is available... XawTV is avialable and its presumed it works 100% on 64bits, at least i cna open it

Mandrake Control Center uses XawTV dto scan channels, so that exactly what doesn't go furtheris the time when channels are supposed to be scanned thanks, SK

Hi, My MDK10 AMD64, detects my BT878 TV card, but when I run the config tool, so I can scan/have the channels working, it just starts in the console window, but before writting any line about channels found it closes the console window and does no synchronization,... so i can't have TV working in my PC. Anyone knows how to solve this? SK

It is not possible to have the same libraries of gtk2 for 64bots and 32bits, the urpmi just freaks out when i install via control panel software and libraries. If someone was able to have libraries for 32 and 64 bits working together i am interested to know how it is done... for me it i not possible,if i install the packages 64bt from the Cds thats ok, but if I try others, even compile them i can'0t do it because installing libraries simply gives me errors. By the way i cannot boot up the mdk in my system it says "Activating swap partitions" but goes no much further. It really hangs must reset the machine to pass over it.

thanx capnkirby Im gonna try,.. i made the investment on the hardware, and it would be a great pain to have to use the shitty Window$ again after 2 years of MDK concersion thank you SK

Hi, MDK10 64 suckz big time, it's now more than 10 applications I can't have on it, so my question is, can I install the normal MDK10 Official distribution on a 64bits machine? It's a AMD64 This is so od, that I will be forced to install Windows XP Pro, because I upgraded the PC and no way back on the processing department. thanks, SK

im putting some info here about the /var/log/messages Jul 5 17:46:26 Vigor11 kde3(pam_unix)[1880]: session opened for user root by (uid=0) Jul 5 17:46:30 Vigor11 gconfd (root-2194): starting (version 2.4.0.1), pid 2194 user 'root' Jul 5 17:46:31 Vigor11 gconfd (root-2194): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only config source at position 0 Jul 5 17:46:31 Vigor11 gconfd (root-2194): Resolved address "xml:readwrite:/root/.gconf" to a writable config source at position 1 Jul 5 17:46:31 Vigor11 gconfd (root-2194): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only config source at position 2 Jul 5 17:46:33 Vigor11 kernel: hdc: lost interrupt Jul 5 17:46:33 Vigor11 kernel: hdc: cdrom_pc_intr: The drive appears confused (ireason = 0x01) Jul 5 17:47:33 Vigor11 kernel: hdc: lost interrupt Jul 5 17:47:33 Vigor11 kernel: hdc: cdrom_pc_intr: The drive appears confused (ireason = 0x01) Jul 5 17:48:33 Vigor11 kernel: hdc: lost interrupt Jul 5 17:48:33 Vigor11 kernel: hdc: cdrom_pc_intr: The drive appears confused (ireason = 0x01) Jul 5 17:49:33 Vigor11 kernel: hdc: lost interrupt Jul 5 17:49:33 Vigor11 kernel: hdc: cdrom_pc_intr: The drive appears confused (ireason = 0x01) Jul 5 17:53:05 Vigor11 syslogd 1.4.1: restart. Jul 5 17:53:05 Vigor11 kernel: klogd 1.4.1, log source = /proc/kmsg started. Jul 5 17:53:05 Vigor11 kernel: Inspecting /boot/System.map-2.6.3-7mdk Jul 5 17:53:05 Vigor11 partmon: Checking if partitions have enough free diskspace: Jul 5 17:53:05 Vigor11 kernel: Loaded 29322 symbols from /boot/System.map-2.6.3-7mdk. Jul 5 17:53:05 Vigor11 kernel: Symbols match kernel version 2.6.3. Jul 5 17:53:05 Vigor11 kernel: No module symbols loaded - kernel modules not enabled. Jul 5 17:53:05 Vigor11 kernel: Linux version 2.6.3-7mdk (nplanel@n3.mandrakesoft.com) (gcc version 3.3.2 (Mandrake Linux 10.0 3.3.2-6mdk)) #1 Wed Mar 17 15:56:42 CET 2004 Jul 5 17:53:05 Vigor11 kernel: BIOS-provided physical RAM map: Jul 5 17:53:05 Vigor11 kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) Jul 5 17:53:05 Vigor11 kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) Jul 5 17:53:05 Vigor11 kernel: BIOS-e820: 00000000000d2000 - 00000000000d8000 (reserved) Jul 5 17:53:05 Vigor11 kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) Jul 5 17:53:05 Vigor11 kernel: BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) Jul 5 17:53:05 Vigor11 kernel: BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data) Jul 5 17:53:05 Vigor11 kernel: BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS) Jul 5 17:53:05 Vigor11 kernel: BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) Jul 5 17:53:05 Vigor11 kernel: BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) Jul 5 17:53:05 Vigor11 kernel: BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) Jul 5 17:53:05 Vigor11 kernel: 511MB LOWMEM available. Jul 5 17:53:05 Vigor11 kernel: On node 0 totalpages: 131056 Jul 5 17:53:05 Vigor11 kernel: DMA zone: 4096 pages, LIFO batch:1 Jul 5 17:53:05 Vigor11 kernel: Normal zone: 126960 pages, LIFO batch:16 Jul 5 17:53:05 Vigor11 kernel: HighMem zone: 0 pages, LIFO batch:1 Jul 5 17:53:05 Vigor11 kernel: DMI 2.3 present. Jul 5 17:53:05 Vigor11 kernel: ACPI: RSDP (v000 AMI ) @ 0x000fa540 Jul 5 17:53:05 Vigor11 kernel: ACPI: RSDT (v001 AMIINT VIA_K7 0x00000010 MSFT 0x00000097) @ 0x1fff0000 Jul 5 17:53:05 Vigor11 kernel: ACPI: FADT (v001 AMIINT VIA_K7 0x00000011 MSFT 0x00000097) @ 0x1fff0030 Jul 5 17:53:05 Vigor11 kernel: ACPI: DSDT (v001 VIA VIA_K7 0x00001000 INTL 0x02002024) @ 0x00000000 Jul 5 17:53:05 Vigor11 kernel: ACPI: PM-Timer IO Port: 0x808 Jul 5 17:53:05 Vigor11 kernel: Built 1 zonelists Jul 5 17:53:05 Vigor11 kernel: Kernel command line: BOOT_IMAGE=linux ro root=307 udev=mount acpi=ht resume=/dev/hda8 splash=silent devfs=mount Jul 5 17:53:05 Vigor11 kernel: bootsplash: silent mode. Jul 5 17:53:05 Vigor11 kernel: Local APIC disabled by BIOS -- reenabling. Jul 5 17:53:05 Vigor11 kernel: Found and enabled local APIC! Jul 5 17:53:05 Vigor11 kernel: Initializing CPU#0 Jul 5 17:53:05 Vigor11 kernel: PID hash table entries: 2048 (order 11: 16384 bytes) Jul 5 17:53:05 Vigor11 kernel: Detected 1995.603 MHz processor. Jul 5 17:53:05 Vigor11 kernel: Using pmtmr for high-res timesource Jul 5 17:53:05 Vigor11 kernel: Console: colour dummy device 80x25 Jul 5 17:53:05 Vigor11 kernel: Memory: 514844k/524224k available (1816k kernel code, 8616k reserved, 849k data, 272k init, 0k highmem) Jul 5 17:53:05 Vigor11 kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok. Jul 5 17:53:05 Vigor11 kernel: Calibrating delay loop... 3940.35 BogoMIPS Jul 5 17:53:05 Vigor11 kernel: Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Jul 5 17:53:05 Vigor11 kernel: Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Jul 5 17:53:05 Vigor11 kernel: Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Jul 5 17:53:05 Vigor11 kernel: checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Jul 5 17:53:05 Vigor11 kernel: Freeing initrd memory: 134k freed Jul 5 17:53:05 Vigor11 kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) Jul 5 17:53:05 Vigor11 kernel: CPU: L2 Cache: 512K (64 bytes/line) Jul 5 17:53:05 Vigor11 kernel: Intel machine check architecture supported. Jul 5 17:53:05 Vigor11 kernel: Intel machine check reporting enabled on CPU#0. Jul 5 17:53:05 Vigor11 kernel: CPU: AMD mobile AMD Athlon XP-M 2600+ stepping 00 Jul 5 17:53:05 Vigor11 kernel: Enabling fast FPU save and restore... done. Jul 5 17:53:05 Vigor11 kernel: Enabling unmasked SIMD FPU exception support... done. Jul 5 17:53:05 Vigor11 kernel: Checking 'hlt' instruction... OK. Jul 5 17:53:05 Vigor11 kernel: POSIX conformance testing by UNIFIX Jul 5 17:53:05 Vigor11 kernel: enabled ExtINT on CPU#0 Jul 5 17:53:05 Vigor11 kernel: ESR value before enabling vector: 00000000 Jul 5 17:53:05 Vigor11 kernel: ESR value after enabling vector: 00000000 Jul 5 17:53:05 Vigor11 kernel: Using local APIC timer interrupts. Jul 5 17:53:05 Vigor11 kernel: calibrating APIC timer ... Jul 5 17:53:05 Vigor11 kernel: ..... CPU clock speed is 1993.0959 MHz. Jul 5 17:53:05 Vigor11 kernel: ..... host bus clock speed is 265.0861 MHz. Jul 5 17:53:05 Vigor11 kernel: NET: Registered protocol family 16 Jul 5 17:53:05 Vigor11 kernel: EISA bus registered Jul 5 17:53:05 Vigor11 kernel: PCI: PCI BIOS revision 2.10 entry at 0xfda91, last bus=1 Jul 5 17:53:05 Vigor11 kernel: PCI: Using configuration type 1 Jul 5 17:53:05 Vigor11 kernel: mtrr: v2.0 (20020519) Jul 5 17:53:05 Vigor11 kernel: ACPI: Subsystem revision 20040211 Jul 5 17:53:05 Vigor11 kernel: ACPI: Interpreter disabled. Jul 5 17:53:05 Vigor11 kernel: Linux Plug and Play Support v0.97 © Adam Belay Jul 5 17:53:05 Vigor11 kernel: PnPBIOS: Disabled Jul 5 17:53:05 Vigor11 kernel: PCI: Probing PCI hardware Jul 5 17:53:05 Vigor11 kernel: PCI: Probing PCI hardware (bus 00) Jul 5 17:53:05 Vigor11 kernel: PCI: Using IRQ router default [1106/3177] at 0000:00:11.0 Jul 5 17:53:05 Vigor11 kernel: PCI: IRQ 0 for device 0000:00:0b.0 doesn't match PIRQ mask - try pci=usepirqmask Jul 5 17:53:05 Vigor11 kernel: PCI: IRQ 0 for device 0000:00:11.1 doesn't match PIRQ mask - try pci=usepirqmask Jul 5 17:53:05 Vigor11 kernel: PCI: Hardcoded IRQ 14 for device 0000:00:11.1 Jul 5 17:53:05 Vigor11 kernel: vesafb: framebuffer at 0xd0000000, mapped to 0xe0800000, size 16384k Jul 5 17:53:05 Vigor11 kernel: vesafb: mode is 800x600x16, linelength=1600, pages=67 Jul 5 17:53:05 Vigor11 kernel: vesafb: protected mode interface info at c000:5525 Jul 5 17:53:05 Vigor11 kernel: vesafb: scrolling: redraw Jul 5 17:53:05 Vigor11 kernel: vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 Jul 5 17:53:05 Vigor11 kernel: fb0: VESA VGA frame buffer device Jul 5 17:53:05 Vigor11 kernel: apm: BIOS not found. Jul 5 17:53:05 Vigor11 kernel: ikconfig 0.7 with /proc/config* Jul 5 17:53:05 Vigor11 kernel: VFS: Disk quotas dquot_6.5.1 Jul 5 17:53:05 Vigor11 kernel: devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au) Jul 5 17:53:05 Vigor11 kernel: devfs: boot_options: 0x1 Jul 5 17:53:05 Vigor11 kernel: Initializing Cryptographic API Jul 5 17:53:05 Vigor11 kernel: isapnp: Scanning for PnP cards... Jul 5 17:53:05 Vigor11 kernel: spurious 8259A interrupt: IRQ7. Jul 5 17:53:05 Vigor11 kernel: isapnp: No Plug & Play device found Jul 5 17:53:05 Vigor11 kernel: bootsplash 3.1.4-2004/02/19: looking for picture.... silentjpeg size 14856 bytes, found (800x600, 14808 bytes, v3). Jul 5 17:53:05 Vigor11 kernel: Console: switching to colour frame buffer device 92x32 Jul 5 17:53:05 Vigor11 kernel: pty: 1024 Unix98 ptys configured Jul 5 17:53:05 Vigor11 kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled Jul 5 17:53:05 Vigor11 kernel: RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize Jul 5 17:53:05 Vigor11 kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 Jul 5 17:53:05 Vigor11 kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Jul 5 17:53:05 Vigor11 kernel: VP_IDE: IDE controller at PCI slot 0000:00:11.1 Jul 5 17:53:05 Vigor11 kernel: PCI: Hardcoded IRQ 14 for device 0000:00:11.1 Jul 5 17:53:05 Vigor11 kernel: VP_IDE: chipset revision 6 Jul 5 17:53:05 Vigor11 kernel: VP_IDE: not 100%% native mode: will probe irqs later Jul 5 17:53:05 Vigor11 kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Jul 5 17:53:05 Vigor11 kernel: VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1 Jul 5 17:53:05 Vigor11 kernel: ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio Jul 5 17:53:05 Vigor11 kernel: ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio Jul 5 17:53:05 Vigor11 kernel: hda: TOSHIBA MK6021GAS, ATA DISK drive Jul 5 17:53:05 Vigor11 kernel: Using anticipatory io scheduler Jul 5 17:53:05 Vigor11 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Jul 5 17:53:05 Vigor11 kernel: hdc: DVD+RW RW8160, ATAPI CD/DVD-ROM drive Jul 5 17:53:05 Vigor11 kernel: ide1 at 0x170-0x177,0x376 on irq 15 Jul 5 17:53:05 Vigor11 kernel: hda: max request size: 128KiB Jul 5 17:53:05 Vigor11 kernel: hda: 117210240 sectors (60011 MB), CHS=65535/16/63, UDMA(100) Jul 5 17:53:05 Vigor11 kernel: /dev/ide/host0/bus0/target0/lun0: p1 < p5 p6 p7 p8 p9 > p2 Jul 5 17:53:05 Vigor11 kernel: mice: PS/2 mouse device common for all mice Jul 5 17:53:05 Vigor11 kernel: i8042.c: Detected active multiplexing controller, rev 1.0. Jul 5 17:53:05 Vigor11 kernel: serio: i8042 AUX0 port at 0x60,0x64 irq 12 Jul 5 17:53:05 Vigor11 kernel: serio: i8042 AUX1 port at 0x60,0x64 irq 12 Jul 5 17:53:05 Vigor11 kernel: Synaptics Touchpad, model: 1 Jul 5 17:53:05 Vigor11 kernel: Firmware: 4.1 Jul 5 17:53:05 Vigor11 kernel: Sensor: 8 Jul 5 17:53:05 Vigor11 kernel: new absolute packet format Jul 5 17:53:05 Vigor11 kernel: input: SynPS/2 Synaptics TouchPad on isa0060/serio2 Jul 5 17:53:05 Vigor11 kernel: serio: i8042 AUX2 port at 0x60,0x64 irq 12 Jul 5 17:53:05 Vigor11 kernel: serio: i8042 AUX3 port at 0x60,0x64 irq 12 Jul 5 17:53:05 Vigor11 kernel: input: ImPS/2 Generic Wheel Mouse on isa0060/serio4 Jul 5 17:53:05 Vigor11 kernel: serio: i8042 KBD port at 0x60,0x64 irq 1 Jul 5 17:53:05 Vigor11 kernel: input: AT Translated Set 2 keyboard on isa0060/serio0 Jul 5 17:53:05 Vigor11 kernel: md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 Jul 5 17:53:05 Vigor11 kernel: EISA: Probing bus 0 at eisa0 Jul 5 17:53:05 Vigor11 kernel: NET: Registered protocol family 2 Jul 5 17:53:05 Vigor11 kernel: IP: routing cache hash table of 4096 buckets, 32Kbytes Jul 5 17:53:05 Vigor11 kernel: TCP: Hash tables configured (established 32768 bind 65536) Jul 5 17:53:05 Vigor11 kernel: NET: Registered protocol family 1 Jul 5 17:53:05 Vigor11 kernel: BIOS EDD facility v0.13 2004-Mar-09, 1 devices found Jul 5 17:53:05 Vigor11 kernel: Please report your BIOS at http://linux.dell.com/edd/results.html Jul 5 17:53:05 Vigor11 kernel: Resume Machine: resuming from /dev/hda8 Jul 5 17:53:05 Vigor11 kernel: Resuming from device hda8 Jul 5 17:53:05 Vigor11 kernel: Resume Machine: This is normal swap space Jul 5 17:53:05 Vigor11 kernel: md: Autodetecting RAID arrays. Jul 5 17:53:05 Vigor11 kernel: md: autorun ... Jul 5 17:53:05 Vigor11 kernel: md: ... autorun DONE. Jul 5 17:53:05 Vigor11 kernel: RAMDISK: Compressed image found at block 0 Jul 5 17:53:05 Vigor11 kernel: VFS: Mounted root (ext2 filesystem). Jul 5 17:53:05 Vigor11 kernel: Mounted devfs on /dev Jul 5 17:53:05 Vigor11 kernel: EXT3-fs: INFO: recovery required on readonly filesystem. Jul 5 17:53:05 Vigor11 kernel: EXT3-fs: write access will be enabled during recovery. Jul 5 17:53:05 Vigor11 kernel: kjournald starting. Commit interval 5 seconds Jul 5 17:53:05 Vigor11 kernel: EXT3-fs: hda7: orphan cleanup on readonly fs Jul 5 17:53:06 Vigor11 kernel: EXT3-fs: hda7: 2 orphan inodes deleted Jul 5 17:53:06 Vigor11 kernel: EXT3-fs: recovery complete. Jul 5 17:53:06 Vigor11 kernel: EXT3-fs: mounted filesystem with ordered data mode. Jul 5 17:53:06 Vigor11 kernel: Mounted devfs on /dev Jul 5 17:53:06 Vigor11 kernel: Freeing unused kernel memory: 272k freed Jul 5 17:53:06 Vigor11 kernel: Real Time Clock Driver v1.12 Jul 5 17:53:06 Vigor11 kernel: drivers/usb/core/usb.c: registered new driver usbfs Jul 5 17:53:06 Vigor11 kernel: drivers/usb/core/usb.c: registered new driver hub Jul 5 17:53:06 Vigor11 kernel: drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1 Jul 5 17:53:06 Vigor11 kernel: uhci_hcd 0000:00:10.0: UHCI Host Controller Jul 5 17:53:06 Vigor11 kernel: uhci_hcd 0000:00:10.0: irq 11, io base 0000e000 Jul 5 17:53:06 Vigor11 kernel: uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 Jul 5 17:53:06 Vigor11 kernel: hub 1-0:1.0: USB hub found Jul 5 17:53:06 Vigor11 kernel: hub 1-0:1.0: 2 ports detected Jul 5 17:53:06 Vigor11 kernel: uhci_hcd 0000:00:10.1: UHCI Host Controller Jul 5 17:53:06 Vigor11 kernel: uhci_hcd 0000:00:10.1: irq 3, io base 0000e400 Jul 5 17:53:06 Vigor11 kernel: uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 Jul 5 17:53:06 Vigor11 kernel: hub 2-0:1.0: USB hub found Jul 5 17:53:06 Vigor11 kernel: hub 2-0:1.0: 2 ports detected Jul 5 17:53:06 Vigor11 kernel: uhci_hcd 0000:00:10.2: UHCI Host Controller Jul 5 17:53:06 Vigor11 kernel: uhci_hcd 0000:00:10.2: irq 5, io base 0000e800 Jul 5 17:53:06 Vigor11 kernel: uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 Jul 5 17:53:06 Vigor11 kernel: hub 3-0:1.0: USB hub found Jul 5 17:53:06 Vigor11 kernel: hub 3-0:1.0: 2 ports detected Jul 5 17:53:06 Vigor11 kernel: ehci_hcd 0000:00:10.3: EHCI Host Controller Jul 5 17:53:06 Vigor11 kernel: ehci_hcd 0000:00:10.3: irq 10, pci mem e192c700 Jul 5 17:53:06 Vigor11 kernel: ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 Jul 5 17:53:06 Vigor11 kernel: ehci_hcd 0000:00:10.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29 Jul 5 17:53:06 Vigor11 kernel: hub 4-0:1.0: USB hub found Jul 5 17:53:06 Vigor11 kernel: hub 4-0:1.0: 6 ports detected Jul 5 17:53:06 Vigor11 kernel: bootsplash: status on console 0 changed to on Jul 5 17:53:06 Vigor11 kernel: hub 3-0:1.0: connect-debounce failed, port 2 disabled Jul 5 17:53:06 Vigor11 kernel: usb 3-2: new full speed USB device using address 2 Jul 5 17:53:06 Vigor11 kernel: SCSI subsystem initialized Jul 5 17:53:06 Vigor11 kernel: Initializing USB Mass Storage driver... Jul 5 17:53:06 Vigor11 kernel: scsi0 : SCSI emulation for USB Mass Storage devices Jul 5 17:53:06 Vigor11 kernel: Vendor: Generic Model: USB Storage-SMC Rev: 322G Jul 5 17:53:06 Vigor11 kernel: Type: Direct-Access ANSI SCSI revision: 02 Jul 5 17:53:06 Vigor11 kernel: drivers/usb/core/usb.c: registered new driver usb-storage Jul 5 17:53:06 Vigor11 kernel: USB Mass Storage support registered. Jul 5 17:53:06 Vigor11 kernel: Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0 Jul 5 17:53:06 Vigor11 kernel: EXT3 FS on hda7, internal journal Jul 5 17:53:06 Vigor11 kernel: Adding 1020088k swap on /dev/hda8. Priority:-1 extents:1 Jul 5 17:53:06 Vigor11 kernel: Linux agpgart interface v0.100 © Dave Jones Jul 5 17:53:06 Vigor11 kernel: agpgart: Detected VIA KT400/KT400A/KT600 chipset Jul 5 17:53:06 Vigor11 kernel: agpgart: Maximum main memory to use for agp memory: 439M Jul 5 17:53:06 Vigor11 kernel: agpgart: AGP aperture is 64M @ 0xe0000000 Jul 5 17:53:06 Vigor11 kernel: kjournald starting. Commit interval 5 seconds Jul 5 17:53:06 Vigor11 kernel: EXT3 FS on hda9, internal journal Jul 5 17:53:06 Vigor11 kernel: EXT3-fs: mounted filesystem with ordered data mode. Jul 5 17:53:06 Vigor11 kernel: ohci1394: $Rev: 1097 $ Ben Collins <bcollins@debian.org> Jul 5 17:53:06 Vigor11 kernel: ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[dffff800-dfffffff] Max Packet=[2048] Jul 5 17:53:06 Vigor11 kernel: via-rhine.c:v1.10-LK1.1.19-2.5 July-12-2003 Written by Donald Becker Jul 5 17:53:06 Vigor11 kernel: http://www.scyld.com/network/via-rhine.html Jul 5 17:53:06 Vigor11 kernel: eth0: VIA VT6102 Rhine-II at 0xd400, 00:03:0d:07:7a:3c, IRQ 11. Jul 5 17:53:06 Vigor11 kernel: eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link 45e1. Jul 5 17:53:06 Vigor11 kernel: Linux Kernel Card Services Jul 5 17:53:06 Vigor11 kernel: options: [pci] [cardbus] [pm] Jul 5 17:53:06 Vigor11 kernel: PCI: IRQ 0 for device 0000:00:0b.0 doesn't match PIRQ mask - try pci=usepirqmask Jul 5 17:53:06 Vigor11 kernel: PCI: No IRQ known for interrupt pin A of device 0000:00:0b.0. Please try using pci=biosirq. Jul 5 17:53:06 Vigor11 kernel: Yenta: CardBus bridge found at 0000:00:0b.0 [1584:3000] Jul 5 17:53:06 Vigor11 kernel: irq 3: nobody cared! Jul 5 17:53:06 Vigor11 kernel: Call Trace: Jul 5 17:53:06 Vigor11 kernel: [__report_bad_irq+35/128] __report_bad_irq+0x23/0x80 Jul 5 17:53:06 Vigor11 kernel: [<c010d543>] __report_bad_irq+0x23/0x80 Jul 5 17:53:06 Vigor11 kernel: [note_interrupt+120/160] note_interrupt+0x78/0xa0 Jul 5 17:53:06 Vigor11 kernel: [<c010d638>] note_interrupt+0x78/0xa0 Jul 5 17:53:06 Vigor11 kernel: [do_IRQ+217/256] do_IRQ+0xd9/0x100 Jul 5 17:53:06 Vigor11 kernel: [<c010d839>] do_IRQ+0xd9/0x100 Jul 5 17:53:06 Vigor11 kernel: [common_interrupt+24/32] common_interrupt+0x18/0x20 Jul 5 17:53:06 Vigor11 kernel: [<c010bf28>] common_interrupt+0x18/0x20 Jul 5 17:53:06 Vigor11 kernel: [do_softirq+80/192] do_softirq+0x50/0xc0 Jul 5 17:53:06 Vigor11 kernel: [<c0126500>] do_softirq+0x50/0xc0 Jul 5 17:53:06 Vigor11 kernel: [do_IRQ+229/256] do_IRQ+0xe5/0x100 Jul 5 17:53:06 Vigor11 kernel: [<c010d845>] do_IRQ+0xe5/0x100 Jul 5 17:53:06 Vigor11 kernel: [common_interrupt+24/32] common_interrupt+0x18/0x20 Jul 5 17:53:06 Vigor11 kernel: [<c010bf28>] common_interrupt+0x18/0x20 Jul 5 17:53:06 Vigor11 kernel: [delay_pmtmr+18/32] delay_pmtmr+0x12/0x20 Jul 5 17:53:06 Vigor11 kernel: [<c01160c2>] delay_pmtmr+0x12/0x20 Jul 5 17:53:06 Vigor11 kernel: [__delay+15/32] __delay+0xf/0x20 Jul 5 17:53:06 Vigor11 kernel: [<c01c4a3f>] __delay+0xf/0x20 Jul 5 17:53:06 Vigor11 kernel: [__crc_open_private_file+1475392/4965071] 0xe1a70759 Jul 5 17:53:06 Vigor11 kernel: [<e1a70759>] 0xe1a70759 Jul 5 17:53:06 Vigor11 kernel: [__crc_open_private_file+1475580/4965071] 0xe1a70815 Jul 5 17:53:06 Vigor11 kernel: [<e1a70815>] 0xe1a70815 Jul 5 17:53:06 Vigor11 kernel: [__crc_open_private_file+1476271/4965071] 0xe1a70ac8 Jul 5 17:53:06 Vigor11 kernel: [<e1a70ac8>] 0xe1a70ac8 Jul 5 17:53:06 Vigor11 kernel: [pci_device_probe_static+55/80] pci_device_probe_static+0x37/0x50 Jul 5 17:53:06 Vigor11 kernel: [<c01c7f67>] pci_device_probe_static+0x37/0x50 Jul 5 17:53:06 Vigor11 kernel: [__pci_device_probe+41/64] __pci_device_probe+0x29/0x40 Jul 5 17:53:06 Vigor11 kernel: [<c01c7fa9>] __pci_device_probe+0x29/0x40 Jul 5 17:53:06 Vigor11 kernel: [pci_device_probe+30/64] pci_device_probe+0x1e/0x40 Jul 5 17:53:06 Vigor11 kernel: [<c01c7fde>] pci_device_probe+0x1e/0x40 Jul 5 17:53:06 Vigor11 kernel: [bus_match+47/112] bus_match+0x2f/0x70 Jul 5 17:53:06 Vigor11 kernel: [<c0208b0f>] bus_match+0x2f/0x70 Jul 5 17:53:06 Vigor11 kernel: [driver_attach+77/144] driver_attach+0x4d/0x90 Jul 5 17:53:06 Vigor11 kernel: [<c0208c3d>] driver_attach+0x4d/0x90 Jul 5 17:53:06 Vigor11 kernel: [bus_add_driver+111/144] bus_add_driver+0x6f/0x90 Jul 5 17:53:06 Vigor11 kernel: [<c0208e8f>] bus_add_driver+0x6f/0x90 Jul 5 17:53:06 Vigor11 kernel: [driver_register+47/64] driver_register+0x2f/0x40 Jul 5 17:53:06 Vigor11 kernel: [<c020926f>] driver_register+0x2f/0x40 Jul 5 17:53:06 Vigor11 kernel: [pci_register_driver+80/128] pci_register_driver+0x50/0x80 Jul 5 17:53:06 Vigor11 kernel: [<c01c8190>] pci_register_driver+0x50/0x80 Jul 5 17:53:06 Vigor11 kernel: [__crc_open_private_file+154612/4965071] 0xe192e00d Jul 5 17:53:06 Vigor11 kernel: [<e192e00d>] 0xe192e00d Jul 5 17:53:06 Vigor11 kernel: [sys_init_module+223/432] sys_init_module+0xdf/0x1b0 Jul 5 17:53:06 Vigor11 kernel: [<c013666f>] sys_init_module+0xdf/0x1b0 Jul 5 17:53:06 Vigor11 kernel: [sysenter_past_esp+82/121] sysenter_past_esp+0x52/0x79 Jul 5 17:53:06 Vigor11 kernel: [<c010afa9>] sysenter_past_esp+0x52/0x79 Jul 5 17:53:06 Vigor11 kernel: Jul 5 17:53:06 Vigor11 kernel: handlers: Jul 5 17:53:06 Vigor11 kernel: [__crc_open_private_file+324071/4965071] (__crc_usb_hub_tt_clear_buffer+0x184c9a7/0x1854131 [usbcore]) Jul 5 17:53:06 Vigor11 kernel: [<e1957600>] (__crc_usb_hub_tt_clear_buffer+0x184c9a7/0x1854131 [usbcore]) Jul 5 17:53:06 Vigor11 kernel: Disabling IRQ #3 Jul 5 17:53:06 Vigor11 kernel: Yenta: ISA IRQ mask 0x0290, PCI irq 0 Jul 5 17:53:06 Vigor11 kernel: Socket status: 30000006 Jul 5 17:53:06 Vigor11 kernel: cs: IO port probe 0x0c00-0x0cff: excluding 0xc00-0xc7f Jul 5 17:53:06 Vigor11 kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x1c0-0x1cf 0x200-0x207 0x378-0x37f 0x400-0x40f 0x4d0-0x4d7 Jul 5 17:53:06 Vigor11 kernel: cs: IO port probe 0x0a00-0x0aff: clean. Jul 5 17:53:06 Vigor11 kernel: NET: Registered protocol family 17 Jul 5 17:53:06 Vigor11 kernel: eth0: Setting full-duplex based on MII #1 link partner capability of 45e1. Jul 5 17:53:06 Vigor11 partmon: ^[[65G Jul 5 17:53:06 Vigor11 partmon: [^[[1;32m Jul 5 17:53:06 Vigor11 partmon: Jul 5 17:53:06 Vigor11 rc: Starting partmon: succeeded Jul 5 17:53:06 Vigor11 nfslock: rpc.lockd startup succeeded Jul 5 17:53:06 Vigor11 rpc.statd[1274]: Version 1.0.6 Starting Jul 5 17:53:06 Vigor11 rpc.statd[1274]: statd running as root. chown /var/lib/nfs/sm to choose different user Jul 5 18:51:09 Vigor11 rc.sysinit: Setting default font (lat0-16): succeeded Jul 5 18:51:09 Vigor11 rc.sysinit: Mounting proc filesystem succeeded Jul 5 18:51:11 Vigor11 rc.sysinit: Mounting sysfs on /sys succeeded Jul 5 18:51:11 Vigor11 devfsd: Started device management daemon v1.3.25 for /dev Jul 5 18:51:11 Vigor11 rc.sysinit: Running DevFs daemon succeeded Jul 5 18:51:11 Vigor11 rc.sysinit: Unmounting initrd: succeeded Jul 5 18:51:11 Vigor11 rc.sysinit: Configuring kernel parameters: succeeded Jul 5 17:51:15 Vigor11 date: Mon Jul 5 17:51:15 WEST 2004 Jul 5 17:51:15 Vigor11 rc.sysinit: Setting clock (localtime): Mon Jul 5 17:51:15 WEST 2004 succeeded Jul 5 17:51:15 Vigor11 rc.sysinit: Loading default keymap succeeded Jul 5 17:51:15 Vigor11 rc.sysinit: Setting hostname localhost: succeeded Jul 5 17:51:16 Vigor11 usb: Initializing USB controller (usb-uhci): succeeded Jul 5 17:51:16 Vigor11 usb: Initializing USB controller (ehci-hcd): succeeded Jul 5 17:51:17 Vigor11 usb: Mount USB filesystem succeeded Jul 5 17:51:18 Vigor11 modprobe: FATAL: Module scsimon not found. Jul 5 17:51:19 Vigor11 fsck: ^B Jul 5 17:51:28 Vigor11 last message repeated 60 times Jul 5 17:51:28 Vigor11 fsck: ^B/dev/hda7: 22026/641280 files (0.2% non-contiguous), 60892/1281175 blocks Jul 5 17:51:28 Vigor11 rc.sysinit: Remounting root filesystem in read-write mode: succeeded Jul 5 17:51:28 Vigor11 rc.sysinit: Activating swap partitions: succeeded Jul 5 17:51:29 Vigor11 : Loading module: scsi_hostadapter Jul 5 17:51:29 Vigor11 : Loading module: via-agp Jul 5 17:51:29 Vigor11 fsck: /dev/hda9: recovering journal Jul 5 17:51:29 Vigor11 fsck: ^A/dev/hda9: | Jul 5 17:51:29 Vigor11 fsck: ^B Jul 5 17:52:53 Vigor11 last message repeated 323 times Jul 5 17:52:53 Vigor11 fsck: ^B/dev/hda9: 95633/2044000 files (0.2% non-contiguous), 511075/4080502 blocks Jul 5 17:52:54 Vigor11 rc.sysinit: Mounting local filesystems: succeeded Jul 5 17:52:54 Vigor11 rc.sysinit: Mounting loopback filesystems: succeeded Jul 5 17:52:55 Vigor11 loadkeys: Loading /usr/lib/kbd/keymaps/i386/qwerty/pt-latin1.kmap.gz Jul 5 17:52:55 Vigor11 keytable: Loading keymap: pt-latin1 succeeded Jul 5 17:52:55 Vigor11 loadkeys: Loading /usr/lib/kbd/keymaps/include/compose.latin.inc.gz Jul 5 17:52:55 Vigor11 keytable: Loading compose keys: compose.latin.inc succeeded Jul 5 17:52:55 Vigor11 keytable: succeeded Jul 5 17:52:55 Vigor11 rc.sysinit: Enabling swap space: succeeded Jul 5 17:52:55 Vigor11 rc.sysinit: Initializing firewire controller (ohci1394): succeeded Jul 5 17:52:56 Vigor11 mandrake_everytime: Starting netprofile: succeeded Jul 5 17:52:56 Vigor11 init: Entering runlevel: 5 Jul 5 17:52:56 Vigor11 pcmcia: Starting PCMCIA services: Jul 5 17:52:58 Vigor11 pcmcia: cardmgr[940]: watching 1 socket Jul 5 17:52:58 Vigor11 cardmgr[940]: watching 1 socket Jul 5 17:52:58 Vigor11 cardmgr[941]: starting, version is 3.2.5 Jul 5 17:52:58 Vigor11 pcmcia: done. Jul 5 17:52:58 Vigor11 rc: Starting pcmcia: succeeded Jul 5 17:52:58 Vigor11 network: Setting network parameters: succeeded Jul 5 17:52:58 Vigor11 network: Bringing up loopback interface: succeeded Jul 5 17:52:59 Vigor11 ifplugd(eth0)[1060]: ifplugd 0.21b initializing. Jul 5 17:52:59 Vigor11 ifplugd(eth0)[1060]: Using interface eth0/00:03:0D:07:7A:3C with driver <via-rhine> (version: 1.1.19-2.5) Jul 5 17:52:59 Vigor11 ifplugd(eth0)[1060]: Using detection mode: SIOCGMIIPHY Jul 5 17:52:59 Vigor11 ifplugd(eth0)[1060]: Initialization complete, link beat detected. Jul 5 17:52:59 Vigor11 ifplugd(eth0)[1060]: Executing '/etc/ifplugd/ifplugd.action eth0 up'. Jul 5 17:53:02 Vigor11 dhclient: DHCPACK from 192.168.1.1 Jul 5 17:53:02 Vigor11 ifplugd(eth0)[1060]: client: Determining IP information for eth0... done. Jul 5 17:53:02 Vigor11 ifplugd(eth0)[1060]: Program executed successfully. Jul 5 17:53:02 Vigor11 network: Bringing up interface eth0: succeeded Jul 5 17:53:02 Vigor11 portmap: portmap startup succeeded Jul 5 17:53:08 Vigor11 rpc.statd[1274]: gethostbyname error for Vigor11 Jul 5 17:53:08 Vigor11 nfslock: rpc.statd startup succeeded Jul 5 17:53:08 Vigor11 kernel: via82xx: Assuming DXS channels with 48k fixed sample rate. Jul 5 17:53:08 Vigor11 kernel: Please try dxs_support=1 or dxs_support=4 option Jul 5 17:53:08 Vigor11 kernel: and report if it works on your machine. Jul 5 17:53:09 Vigor11 alsa: succeeded Jul 5 17:53:10 Vigor11 alsa: succeeded Jul 5 17:53:12 Vigor11 sound: Loading mixer settings succeeded Jul 5 17:53:12 Vigor11 random: Initializing random number generator: succeeded Jul 5 17:53:12 Vigor11 xfs: xfs startup succeeded Jul 5 17:53:12 Vigor11 netfs: Mounting other filesystems: succeeded Jul 5 17:53:12 Vigor11 xfs: ignoring font path element /usr/X11R6/lib/X11/fonts/drakfont (unreadable) Jul 5 17:53:12 Vigor11 xfs: ignoring font path element /usr/X11R6/lib/X11/fonts/drakfont/Type1 (unreadable) Jul 5 17:53:12 Vigor11 xfs: ignoring font path element /usr/X11R6/lib/X11/fonts/drakfont/ttf (unreadable) Jul 5 17:53:12 Vigor11 xfs: ignoring font path element /usr/X11R6/lib/X11/fonts/100dpi:unscaled (unreadable) Jul 5 17:53:12 Vigor11 dm: Starting display manager: Jul 5 17:53:12 Vigor11 dm: Display manager startup succeeded Jul 5 17:53:12 Vigor11 dm: ^[[65G Jul 5 17:53:12 Vigor11 dm: [^[[1;32m Jul 5 17:53:12 Vigor11 dm: Jul 5 17:53:12 Vigor11 xfs: ignoring font path element /usr/X11R6/lib/X11/fonts/pcf_drakfont:unscaled (unreadable) Jul 5 17:53:13 Vigor11 rc: Starting dm: succeeded Jul 5 17:53:13 Vigor11 atd: atd startup succeeded Jul 5 17:53:13 Vigor11 xinetd: xinetd startup succeeded Jul 5 17:53:13 Vigor11 loadkeys: Loading /usr/lib/kbd/keymaps/i386/qwerty/pt-latin1.kmap.gz Jul 5 17:53:13 Vigor11 keytable: Loading keymap: pt-latin1 succeeded Jul 5 17:53:13 Vigor11 loadkeys: Loading /usr/lib/kbd/keymaps/include/compose.latin.inc.gz Jul 5 17:53:13 Vigor11 keytable: Loading compose keys: compose.latin.inc succeeded Jul 5 17:53:13 Vigor11 keytable: succeeded Jul 5 17:53:13 Vigor11 crond[1861]: (CRON) STARTUP (fork ok) Jul 5 17:53:14 Vigor11 crond: crond startup succeeded Jul 5 17:53:14 Vigor11 rc: Starting kheader: succeeded Jul 5 17:53:14 Vigor11 xinetd[1773]: xinetd Version 2.3.13 started with libwrap options compiled in. Jul 5 17:53:14 Vigor11 xinetd[1773]: Started working: 1 available service Jul 5 17:53:15 Vigor11 devfsd[136]: Caught SIGHUP Jul 5 17:53:15 Vigor11 devfsd[136]: read config file: "/etc/devfs/conf.d//dvd.conf" Jul 5 17:53:15 Vigor11 devfsd[136]: read config file: "/etc/devfs/conf.d//dynamic.conf" Jul 5 17:53:15 Vigor11 devfsd[136]: read config file: "/etc/devfs/conf.d//rdvd.conf" Jul 5 17:53:15 Vigor11 devfsd[136]: read config file: "/etc/devfs/conf.d//mouse.conf" Jul 5 17:53:15 Vigor11 devfsd[136]: read config file: "/etc/devfs/conf.d//psaux.conf" Jul 5 17:53:15 Vigor11 devfsd[136]: read config file: "/etc/devfsd.conf" Jul 5 17:53:15 Vigor11 devfsd: Running devfsd actions: succeeded Jul 5 17:53:15 Vigor11 kernel: bootsplash 3.1.4-2004/02/19: looking for picture.... found (800x600, 11943 bytes, v3). Jul 5 17:53:15 Vigor11 kernel: bootsplash: status on console 0 changed to on Jul 5 17:53:15 Vigor11 kernel: bootsplash 3.1.4-2004/02/19: looking for picture.... found (800x600, 11943 bytes, v3). Jul 5 17:53:15 Vigor11 kernel: bootsplash: status on console 1 changed to on Jul 5 17:53:15 Vigor11 kernel: bootsplash 3.1.4-2004/02/19: looking for picture.... found (800x600, 11943 bytes, v3). Jul 5 17:53:15 Vigor11 kernel: bootsplash: status on console 2 changed to on Jul 5 17:53:15 Vigor11 kernel: bootsplash 3.1.4-2004/02/19: looking for picture.... found (800x600, 11943 bytes, v3). Jul 5 17:53:15 Vigor11 kernel: bootsplash: status on console 3 changed to on Jul 5 17:53:15 Vigor11 kernel: bootsplash 3.1.4-2004/02/19: looking for picture.... found (800x600, 11943 bytes, v3). Jul 5 17:53:15 Vigor11 kernel: bootsplash: status on console 4 changed to on Jul 5 17:53:15 Vigor11 kernel: bootsplash 3.1.4-2004/02/19: looking for picture.... found (800x600, 11943 bytes, v3). Jul 5 17:53:15 Vigor11 kernel: bootsplash: status on console 5 changed to on Jul 5 17:53:16 Vigor11 perl: drakupdate_fstab called with --auto --add /dev/ide/host0/bus0/target0/lun0/part1 Jul 5 17:53:16 Vigor11 perl: drakupdate_fstab called with --auto --add /dev/ide/host0/bus0/target0/lun0/part2 Jul 5 17:53:16 Vigor11 perl: drakupdate_fstab called with --auto --add /dev/ide/host0/bus0/target0/lun0/part5 Jul 5 17:53:17 Vigor11 perl: drakupdate_fstab called with --auto --add /dev/ide/host0/bus0/target0/lun0/part6 Jul 5 17:53:17 Vigor11 perl: drakupdate_fstab called with --auto --add /dev/ide/host0/bus0/target0/lun0/part7 Jul 5 17:53:17 Vigor11 perl: drakupdate_fstab called with --auto --add /dev/ide/host0/bus0/target0/lun0/part8 Jul 5 17:53:17 Vigor11 perl: drakupdate_fstab called with --auto --add /dev/ide/host0/bus0/target0/lun0/part9 Jul 5 17:53:17 Vigor11 devfsd[136]: error calling: "unlink" in "GLOBAL" Jul 5 17:53:18 Vigor11 devfsd[136]: error calling: "unlink" in "GLOBAL" Jul 5 17:53:18 Vigor11 kernel: fglrx: module license 'Proprietary. © 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. Jul 5 17:53:18 Vigor11 kernel: [fglrx] Maximum main memory to use for locked dma buffers: 431 MBytes. Jul 5 17:53:18 Vigor11 kernel: [fglrx] module loaded - fglrx 3.7.6 [Mar 5 2004] on minor 0 Jul 5 17:53:18 Vigor11 kernel: mtrr: 0xd0000000,0x4000000 overlaps existing 0xd0000000,0x1000000 Jul 5 17:53:18 Vigor11 kernel: [fglrx:firegl_addmap] *ERROR* mtrr allocation failed (-22) Jul 5 17:53:18 Vigor11 kernel: [fglrx] AGP detected, AgpState = 0x1f000a1b (hardware caps of chipset) Jul 5 17:53:18 Vigor11 kernel: agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0. Jul 5 17:53:18 Vigor11 kernel: agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode Jul 5 17:53:18 Vigor11 kernel: agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode Jul 5 17:53:18 Vigor11 kernel: [fglrx] AGP enabled, AgpCommand = 0x1f000312 (selected caps) Jul 5 17:53:18 Vigor11 kernel: [fglrx] free AGP = 54800384 Jul 5 17:53:18 Vigor11 kernel: [fglrx] max AGP = 54800384 Jul 5 17:53:18 Vigor11 kernel: [fglrx] free LFB = 55574528 Jul 5 17:53:18 Vigor11 kernel: [fglrx] max LFB = 55574528 Jul 5 17:53:18 Vigor11 kernel: [fglrx] free Inv = 0 Jul 5 17:53:18 Vigor11 kernel: [fglrx] max Inv = 0 Jul 5 17:53:18 Vigor11 kernel: [fglrx] total Inv = 0 Jul 5 17:53:18 Vigor11 kernel: [fglrx] total TIM = 0 Jul 5 17:53:18 Vigor11 kernel: [fglrx] total FB = 0 Jul 5 17:53:18 Vigor11 kernel: [fglrx] total AGP = 16384 Jul 5 17:53:18 Vigor11 kernel: atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). Jul 5 17:53:18 Vigor11 kernel: atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly. Jul 5 17:53:18 Vigor11 kernel: atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). Jul 5 17:53:18 Vigor11 kernel: atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly. Jul 5 17:53:36 Vigor11 kde3(pam_unix)[1862]: session opened for user joao by (uid=0) Jul 5 17:53:36 Vigor11 kernel: inserting floppy driver for 2.6.3-7mdk Jul 5 17:53:39 Vigor11 kernel: floppy0: no floppy controllers found Jul 5 17:53:39 Vigor11 modprobe: FATAL: Error inserting floppy (/lib/modules/2.6.3-7mdk/kernel/drivers/block/floppy.ko.gz): No such device Jul 5 17:53:39 Vigor11 kernel: inserting floppy driver for 2.6.3-7mdk Jul 5 17:53:42 Vigor11 kernel: floppy0: no floppy controllers found Jul 5 17:53:42 Vigor11 modprobe: FATAL: Error inserting floppy (/lib/modules/2.6.3-7mdk/kernel/drivers/block/floppy.ko.gz): No such device Jul 5 17:53:42 Vigor11 kernel: inserting floppy driver for 2.6.3-7mdk Jul 5 17:53:45 Vigor11 kernel: floppy0: no floppy controllers found Jul 5 17:53:45 Vigor11 modprobe: FATAL: Error inserting floppy (/lib/modules/2.6.3-7mdk/kernel/drivers/block/floppy.ko.gz): No such device Jul 5 17:53:47 Vigor11 kernel: hdc: lost interrupt Jul 5 17:53:47 Vigor11 kernel: hdc: cdrom_pc_intr: The drive appears confused (ireason = 0x01) Jul 5 17:54:47 Vigor11 kernel: hdc: lost interrupt Jul 5 17:54:47 Vigor11 kernel: hdc: cdrom_pc_intr: The drive appears confused (ireason = 0x01) Jul 5 17:56:26 Vigor11 syslogd 1.4.1: restart.

Hi illogic-al, I putted Harddrake off, and now I don't get the "Checking for new hardwarw" never, I did boot with #linux udev=mount But now i cannot login with my user account, i put the login and the password, i click on Login, it passes as the login is right, but after that nothing else happens, i just keep with the background image of MDK10 and stay there a long time, the splash screen never appears, i waited 15 mintues and nothing... In the same situation, I do can go further after the login as root in the KDE even waiting 2 minutes in the splash screen at the zone of "Initializing system services", but after the spalsh screen i stay with the red background a lot of time other 15 minutes and nothing happens. I also tryed boot with #linux devfs=mount, and happens all exactly as with udev Tryed again with devfs=nomount, and that way i could login and get inside, but again, no DVD/CD, no usb devices etc.... thanx, SK

RAM (Mo) : 512MB DDR- CPU : Athlon XP-M - 2600+ Connection : ADSL-Ethernet Hard disk : Toshi - 60Gb CD / DVD ROM : Ricoh Video card : Mobility Radeon 9600 - 64MB DDR-R Sound card : AC from KT 400(A) Network : Ethernet KT400(A) SCSI : 1 - none MDK10 XP-Home on dual boot I only can login with devfs=nomount, so when i'm inside the thing i cannot access DVD+RW/CDRW combo drive, i cannot access the embutted card reader (smartmedia, sd, stick, etc.). And probably many more devices I probably cannot access but still haven't checked. This is the ONLY way I can access to login on my laptop, is there a way i can solve this? If I don't put devfs=nomount, the boot of MDK10 hangs on "Checking for new hardware" thanks, SK

i had the same problem, my dvd-burner on my laptop didn't read Ds or DVDs, big scre up... it started working only when my motherboard manufacturer had this new upgrade BIOS, after i upgrade my bios it started working. cheers, SK

hi, still seems not to work I did in httpd.conf file <IfDefine> Port 81 Listen 81 </IfDefine> in the end I putted the virtual hhost config <VirtualHost localhost:81> ServerName localhost DocumentRoot "/home/user/wwwprj/websiteA" </VirtualHost> then in command line i did apachectl restart after that I went to my browser but after putting localhost:81 it didn't worked is there something missing? I put my http configuration here for u to see ### Main Configuration Section ### You really shouldn't change these settings unless you're a guru ### ServerType standalone ServerRoot /etc/httpd #ServerName localhost #LockFile /etc/httpd/httpd.lock PidFile /var/run/httpd.pid ScoreBoardFile /etc/httpd/httpd.scoreboard ErrorLog logs/error_log LogLevel warn ResourceConfig /dev/null AccessConfig /dev/null DocumentRoot /var/www/html ### Dynamic Shared Object (DSO) Support ### ### #LoadModule mmap_static_module modules/mod_mmap_static.so LoadModule env_module modules/mod_env.so LoadModule config_log_module modules/mod_log_config.so LoadModule agent_log_module modules/mod_log_agent.so LoadModule referer_log_module modules/mod_log_referer.so #LoadModule mime_magic_module modules/mod_mime_magic.so LoadModule mime_module modules/mod_mime.so LoadModule negotiation_module modules/mod_negotiation.so LoadModule status_module modules/mod_status.so LoadModule info_module modules/mod_info.so LoadModule includes_module modules/mod_include.so LoadModule autoindex_module modules/mod_autoindex.so LoadModule dir_module modules/mod_dir.so LoadModule cgi_module modules/mod_cgi.so LoadModule asis_module modules/mod_asis.so LoadModule imap_module modules/mod_imap.so LoadModule action_module modules/mod_actions.so #LoadModule speling_module modules/mod_speling.so LoadModule userdir_module modules/mod_userdir.so LoadModule proxy_module modules/libproxy.so LoadModule alias_module modules/mod_alias.so LoadModule rewrite_module modules/mod_rewrite.so LoadModule access_module modules/mod_access.so LoadModule auth_module modules/mod_auth.so LoadModule anon_auth_module modules/mod_auth_anon.so #LoadModule dbm_auth_module modules/mod_auth_dbm.so #LoadModule db_auth_module modules/mod_auth_db.so LoadModule digest_module modules/mod_digest.so #LoadModule cern_meta_module modules/mod_cern_meta.so LoadModule expires_module modules/mod_expires.so LoadModule headers_module modules/mod_headers.so LoadModule usertrack_module modules/mod_usertrack.so #LoadModule example_module modules/mod_example.so #LoadModule unique_id_module modules/mod_unique_id.so LoadModule setenvif_module modules/mod_setenvif.so <IfDefine HAVE_SSL> LoadModule ssl_module extramodules/libssl.so </IfDefine> LoadModule vhost_alias_module modules/mod_vhost_alias.so # Reconstruction of the complete module list from all available modules # (static and shared ones) to achieve correct module execution order. # [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO] ClearModuleList #AddModule mod_mmap_static.c AddModule mod_env.c AddModule mod_log_config.c AddModule mod_log_agent.c AddModule mod_log_referer.c #AddModule mod_mime_magic.c AddModule mod_mime.c AddModule mod_negotiation.c AddModule mod_status.c AddModule mod_info.c AddModule mod_include.c AddModule mod_autoindex.c AddModule mod_dir.c AddModule mod_cgi.c AddModule mod_asis.c AddModule mod_imap.c AddModule mod_actions.c #AddModule mod_speling.c AddModule mod_userdir.c AddModule mod_proxy.c AddModule mod_alias.c AddModule mod_rewrite.c AddModule mod_access.c AddModule mod_auth.c AddModule mod_auth_anon.c #AddModule mod_auth_dbm.c #AddModule mod_auth_db.c AddModule mod_digest.c #AddModule mod_cern_meta.c AddModule mod_expires.c AddModule mod_headers.c AddModule mod_usertrack.c #AddModule mod_example.c #AddModule mod_unique_id.c AddModule mod_so.c AddModule mod_setenvif.c <IfDefine HAVE_SSL> AddModule mod_ssl.c </IfDefine> AddModule mod_vhost_alias.c ### ### Global Configuration ### # We now support multiple apache configurations on the same server. In # common.conf, we put all directives that are common to all implementations # (httpd, httpd-perl, etc.) Include conf/commonhttpd.conf ### ### IP Address/Port and Proxied configuration section ### # The APACHEPROXIED setting can be set in /etc/rc.d/init.d/httpd if you # are using a proxy or accelerator, like the Apache-SGI or khttpd, so that # the fast web server serves static content while Apache handles the # cgi or php files #BindAddress * <IfDefine APACHEPROXIED> Port 8080 Listen 8080 </IfDefine> <IfDefine !APACHEPROXIED> Port 80 Listen 80 </IfDefine> <IfDefine !APACHEPROXIED> Port 81 Listen 81 </IfDefine> # Likewise, we can set apache as the server by default and send perl # requests via ProxyPass to apache-mod_perl. It increases performance # since the perl interpreter is only used for perl and the standard apache # does all the html and image files, with a smaller footprint. # # If you install apache and apache-mod_perl, this is the default config. # If you don't want two web servers to use perl, uninstall apache, and # apache-mod_perl will not be proxied. <IfDefine PERLPROXIED> RewriteEngine on RewriteRule ^proxy:.* - [F] RewriteRule ^(.*\/perl\/.*)$ http://%{HTTP_HOST}:8200$1'>http://%{HTTP_HOST}:8200$1 [P] RewriteRule ^(.*\/cgi-perl\/.*)$ http://%{HTTP_HOST}:8200$1 [P] </IfDefine> ### ### Log configuration Section ### #Single logfile with access, agent and referer information #This is the default, if vlogs are not defined for the main server CustomLog logs/access_log combined env=!VLOG #If VLOG is defined in conf/vhosts/Vhost.conf, we use this entry CustomLog "|/usr/sbin/advxsplitlogfile" vhost env=VLOG ### ### Virtual Hosts ### # We include different templates for Virtual Hosting. Have a look in the # vhosts directory and modify to suit your needs. Include conf/vhosts/Vhosts.conf #Include conf/vhosts/DynamicVhosts.conf #Include conf/vhosts/VirtualHomePages.conf ### ### Performance settings Section ### # # Timeout: The number of seconds before receives and sends time out. # Timeout 300 # # KeepAlive: Whether or not to allow persistent connections (more than # one request per connection). Set to "Off" to deactivate. # KeepAlive On # # MaxKeepAliveRequests: The maximum number of requests to allow # during a persistent connection. Set to 0 to allow an unlimited amount. # We recommend you leave this number high, for maximum performance. # MaxKeepAliveRequests 100 # # KeepAliveTimeout: Number of seconds to wait for the next request from the # same client on the same connection. # KeepAliveTimeout 15 # # Server-pool size regulation. Rather than making you guess how many # server processes you need, Apache dynamically adapts to the load it # sees --- that is, it tries to maintain enough server processes to # handle the current load, plus a few spare servers to handle transient # load spikes (e.g., multiple simultaneous requests from a single # Netscape browser). # # It does this by periodically checking how many servers are waiting # for a request. If there are fewer than MinSpareServers, it creates # a new spare. If there are more than MaxSpareServers, some of the # spares die off. The default values are probably OK for most sites. # MinSpareServers 4 MaxSpareServers 10 # # Number of servers to start initially --- should be a reasonable ballpark # figure. # StartServers 4 # # Limit on total number of servers running, i.e., limit on the number # of clients who can simultaneously connect --- if this limit is ever # reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW. # It is intended mainly as a brake to keep a runaway server from taking # the system with it as it spirals down... # MaxClients 150 # # MaxRequestsPerChild: the number of requests each child process is # allowed to process before the child dies. The child will exit so # as to avoid problems after prolonged use when Apache (and maybe the # libraries it uses) leak memory or other resources. On most systems, this # isn't really needed, but a few (such as Solaris) do have notable leaks # in the libraries. For these platforms, set to something like 10000 # or so; a setting of 0 means unlimited. # # NOTE: This value does not include keepalive requests after the initial # request per connection. For example, if a child process handles # an initial request and 10 subsequent "keptalive" requests, it # would only count as 1 request towards this limit. # MaxRequestsPerChild 500 Include conf/ssl/mod_ssl.conf Include conf/ssl/ssl.default-vhost.conf <VirtualHost localhost:81> ServerName localhost DocumentRoot "/home/joao/wwwprj/websiteA" </VirtualHost>

How do i do this 81.127.0.0.1 ? I can do with 127.0.0.1 ? like 127.0.0.1.1 127.0.0.1.2 127.0.0.1.3 ?