Jump to content

AussieJohn

Members
  • Posts

    3125
  • Joined

  • Last visited

  • Days Won

    2

Posts posted by AussieJohn

  1. Mageia so far has it all over Mandriva with these two betas.

     

    In the Mandriva control centre you cannot delete any package without it crashing. When you choose to shut down or reboot, it starts the process but when it gets to blank screen it appears to freeze and can only be dealt with by hitting the reset button. Considering that Mandriva beta2 is about a quarter to one third the size of the Mageia beta 2 it doesn't say much for Mandrivas work to have such important faults at this stage.

     

    The only disappointment I have with Mageia is that a number of my preferred applications are or seem to be missing, namely......knemo, xmms, apcupsd plus gapcmon,and mahjongg3d. There may be others and they may all still appear in the final release. So far I have not encountered any bugs in Mageia at all. A lot of the Major packages seem to be newer versions than in Mandriva.

     

    So far, based on my current experience of both the beta OSs at this stage I think that Mageia 2011 will likely be my next main OS although I will still run Mandriva 2011 but as a secondary OS. Rosa looks flashy but it does not do anything for me and making it a default really stuns me despite the fact that one can choose not to use it. It seems to have come right out of the blue. This sort of thing does not impress me well for Mandiva.

     

    Cheers. John.

  2. Hi all.

     

    I am thinking of buying the named webcam but thought that I should get members views first

     

    I have installed Skype and intend to experiment using it to contact my dear friends in Maine USA.

     

    What other packages do I need to install as well ???. Even though it is a USB device, does it need any extra special drivers etc., ???.

     

    Cheers. John.

  3. Hi Ho Silver...............Surfer. :D

     

    Have you tried entering .....Configure your Desktop......System Settings........Advanced...........Power Management.......Edit Profiles.......Actions......"When the system is idle for more than.." change the bar to "Do nothing".

    Then select .....Screen and then remove the X in the "Enable display power management".

     

    I hope that solves your problem.

     

    Cheers. John.

  4. Hello all.

    I am still here. :) I have completed the Victorian part of my trip. Melbourne, Ballarat, Bendigo and Kyneton still as cold and weather miserable as it ever they were. Now in Newcastle but off to Wollongong on Friday for a grandsons wedding. Saturday it is off to Brisbane and I hope for warmer weather.

    Met lots of nice people along the way so it still has been extremely worthwhile.

     

    I see the Mandriva 2011 beta 2 is running very late, or at least I think it is. Sad.

    I will still hang in there for the long term and that includes MUB.

     

    Cheers all. John.

  5. On Tuesday midday I am off To Melbourne, direct flight, then straight up to Ballarat for an RAAF Radio Apprentices Reunion over 5 days, so I'll be sampling a few reds and whites over the time. Then it is up to Wollongong, just south of Sydney, for the wedding of Grandson number two so I expect it will mean a few more reds and whites. Gee life can be tough sometimes can't it ?. :lol2:

     

    On a side note.....................I downloaded the 2011-beta 64 and it won't install from the opening Install choice nor will it install after using the Launch choice and then trying to install from there. It reaches the Wizard in each case OK and from there on does nothing in one case or reboots in the other case. I see that the 32 version is an extreme disaster as well. The alpha2 version installed OK and didn't seem to have much of aa problem. Onee I remember was that you could install programs OK but to delete any you could only do so via the CLI and urpme. Not a very good sign is it, even for a beta version ???. Maybe all the really talented people have actually gone to Mageia after all. :)

     

    Cheers. John

  6. Thanks Grendal.

    I'll have a look at your suggested OSs and will let you know what I experience.

    I am mainly trying these different OSs to find which ones besides Kubuntu don't have the USB3 problem that I discuss in an other thread. This is so I can try and pinpoint whether it is the particular kernel or kernels or the OS setup that is to blame.

     

    What I have learned so far is that the MCC (Mandriva Control Centre) is streets ahead of anything in the other OSs. I think the same when comparing Gnome versus the KCC (KDE Control Centre), KCC being way ahead.

     

    Cheers. John.

  7. Hi Ian. I can assure you they are likely not the same. Yes it was a CD and not a DVD. The 1st. option is a Launch (Gui) and the 2nd. option is Install (text mode). I did it both ways.

    Doesn't matter anyhow since I won't be using it in the future. I only did it for the experience.

     

    Cheers. John.

  8. I decided to try a number of OSs and got the results I discuss below.

     

    I can now say that Fedora would be the very last of the major Linux OSs that I would ever consider using full time. Sure it is glitzy and sharp but what an agony and a pain in the a**e to install and setup. It seems to take 2 to 3 times as long to install and setup plus 3 times the effort compared to Mandriva. One such annoyance, among many, is it refuses to let you run an Account without a password.....lack of choice....yes I know it is all about security.....blah, blah, blah.

     

    OpenSUSE wasn't too bad. But in the end Mandriva still has the edge on all of them with ease of installing and setting up. Mandriva MCC is what makes it all so so easy. :)

     

    Kubuntu looked promising but having to basically go Live before you can install it is a bit of a deal breaker. I also tried its direct install which is text based only, but is so tricky to follow that it screwed up the partitions I had set up on the Hard Drive. Since it was a different HDD to my Main OS then no real damage was done.

    It was the only one which allowed my Dual HDD USD3 Dock to work as USB3 and it used kernel-desktop-2.6.35-27.

     

    Kernel-desktop-2.6.37-3 in Mageia Alpha1 didn't run the Dock in USB3 mode but that doesn't really mean anything at this stage of Mageia development.

    Kernel-desktop-2.6.34-12 in openSuse didnt work the Dock either.

    Kernel-desktop-2.6.35.11-83 in Fedora-14 also failed to work the Dock as USB3.

     

    It would seem at this stage that it is a kernel deficiency of only just now starting to come to grips with USB3, or Kubuntu are the only ones to have seen and fixed the problem. I am leaning towards the former scenario.

     

    Mandriva 2011 doesn't seem too promising if it is sticking to the kernels being used thus far because the Dock doesn't work in the USB3 mode with it either.

     

    Cheers. John.

  9. I have installed Fedora-14 on a spare HDD.(I did the same with kubuntu, openSuse, Mageia-alpha1 and Mandriva2011-beta2.) It is obviously Gnome oriented but I wanted KDE4 so installed what I thought was the necessary packages for KDE4 including kdm and so on. I cannot find a window manager or suchlike to enable me to select between a gnome and KDE desktop.

    I want to see how they all compare but I so far cannot set up fedora with kde to make this comparison.

     

    Did I miss something or is there more to install to be able to do this ???.

     

    Cheers. John.

     

     

    [moved from Software by spinynorman]

  10. Hi Ian.

     

    I downloaded and installed Kubuntu on another spare partition. Apart from the fact that it was difficult to negotiate and the fact that it is not in the class of Mandriva, it used the 2.6.35-27 kernel.

     

    The USB3 worked spectacularly well. Was even able to view my saved personal Videos from the Hard Drive without any problems what so ever.

     

    So the trouble is either Mandriva or the behind the times kernels that Mandriva is using in 2010.2 and/or the reputed troublesome 2.6.37 in 2011-beta2.

    As an aside, I have found that trying to delete packages in 2011-beta2 causes an error so packages cannot be deleted via the MCC but only by using urpme in Konsole.

    I am going to see if I can download a progressive string of kernels in 22011-beta2 from Cooker and see if there is some point where the problem disappears.

    I've plenty of time to fool around, maybe a little. :-)

     

    Cheers. John.

  11. Hi Ian.

     

    I did update the firmware using a neighbors computer (needed Windows to do it.............Revulsion).

     

    Made no difference. I will try the kernel approach that you suggest and see how I go.

     

    Cheers. John.

  12. Hi Ian.

     

    2.6.33.7-desktop-2mnb

     

     

    I am also going to do a firmware upgrade of the Vantec Dock since I see one is available and it mentions about changes in USB3 drivers. Downloaded it but need Windows (revulsion) to install it so will be using a neighbors machine to do it and see if that is the answer.

     

    Cheers. John.

     

    PS I don't mind simple CLIs such as you ask for so no sorrys needed. :-)

     

    JB

  13. Hello Ian.

    I did as you requested and the results are enclosed.

     

    Cheers. John.

     

    Before :-

     

    [root@dethermy john]# dmesg
    Linux version 2.6.33.7-desktop-2mnb (qateam@titan.mandriva.com) (gcc version 4.4.3 (GCC) ) #1 SMP Mon Sep 20 18:19:20 UTC 2010
    Command line: BOOT_IMAGE=Mandriva2010.2-Spring root=UUID=68f7f6c7-89cf-482c-b32b-32fc7641106f splash=silent vga=788
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
    BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 00000000cfee0000 (usable)
    BIOS-e820: 00000000cfee0000 - 00000000cfee3000 (ACPI NVS)
    BIOS-e820: 00000000cfee3000 - 00000000cfef0000 (ACPI data)
    BIOS-e820: 00000000cfef0000 - 00000000cff00000 (reserved)
    BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
    BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
    NX (Execute Disable) protection: active
    DMI 2.4 present.
    No AGP bridge found
    last_pfn = 0x230000 max_arch_pfn = 0x400000000
    MTRR default type: uncachable
    MTRR fixed ranges enabled:
     00000-9FFFF write-back
     A0000-BFFFF uncachable
     C0000-C7FFF write-protect
     C8000-FFFFF uncachable
    MTRR variable ranges enabled:
     0 base 000000000000 mask FFFF80000000 write-back
     1 base 000080000000 mask FFFFC0000000 write-back
     2 base 0000C0000000 mask FFFFF0000000 write-back
     3 base 0000CFF00000 mask FFFFFFF00000 uncachable
     4 base 000100000000 mask FFFF00000000 write-back
     5 base 000200000000 mask FFFFE0000000 write-back
     6 base 000220000000 mask FFFFF0000000 write-back
     7 disabled
    TOM2: 0000000230000000 aka 8960M
    x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    e820 update range: 00000000cff00000 - 0000000100000000 (usable) ==> (reserved)
    last_pfn = 0xcfee0 max_arch_pfn = 0x400000000
    initial memory mapped : 0 - 20000000
    found SMP MP-table at [ffff8800000f4520] f4520
    Using GB pages for direct mapping
    init_memory_mapping: 0000000000000000-00000000cfee0000
    0000000000 - 00c0000000 page 1G
    00c0000000 - 00cfe00000 page 2M
    00cfe00000 - 00cfee0000 page 4k
    kernel direct mapping tables up to cfee0000 @ 8000-b000
    init_memory_mapping: 0000000100000000-0000000230000000
    0100000000 - 0200000000 page 1G
    0200000000 - 0230000000 page 2M
    kernel direct mapping tables up to 230000000 @ a000-c000
    RAMDISK: 37a46000 - 37fefb0e
    ACPI: RSDP 00000000000f5f30 00014 (v00 GBT   )
    ACPI: RSDT 00000000cfee3000 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
    ACPI: FACP 00000000cfee3040 00074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
    ACPI: DSDT 00000000cfee30c0 070F1 (v01 GBT    GBTUACPI 00001000 MSFT 03000000)
    ACPI: FACS 00000000cfee0000 00040
    ACPI: SSDT 00000000cfeea280 0088C (v01 PTLTD  POWERNOW 00000001  LTP 00000001)
    ACPI: MCFG 00000000cfeeab80 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
    ACPI: TAMG 00000000cfeeabc0 0039A (v01 GBT    GBT   B0 5455312E BG?? 53450101)
    ACPI: APIC 00000000cfeea1c0 00084 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
    ACPI: Local APIC address 0xfee00000
    Scanning NUMA topology in Northbridge 24
    No NUMA configuration found
    Faking a node at 0000000000000000-0000000230000000
    Bootmem setup node 0 0000000000000000-0000000230000000
     NODE_DATA [000000000000b000 - 000000000000ffff]
     bootmap [0000000000010000 -  0000000000055fff] pages 46
    (13 early reservations) ==> bootmem [0000000000 - 0230000000]
     #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
     #1 [0001000000 - 0001933ff8]    TEXT DATA BSS ==> [0001000000 - 0001933ff8]
     #2 [0037a46000 - 0037fefb0e]          RAMDISK ==> [0037a46000 - 0037fefb0e]
     #3 [0001934000 - 00019340fe]              BRK ==> [0001934000 - 00019340fe]
     #4 [00000f4530 - 0000100000]    BIOS reserved ==> [00000f4530 - 0000100000]
     #5 [00000f4520 - 00000f4530]     MP-table mpf ==> [00000f4520 - 00000f4530]
     #6 [000009f800 - 00000f1a04]    BIOS reserved ==> [000009f800 - 00000f1a04]
     #7 [00000f1bd0 - 00000f4520]    BIOS reserved ==> [00000f1bd0 - 00000f4520]
     #8 [00000f1a04 - 00000f1bd0]     MP-table mpc ==> [00000f1a04 - 00000f1bd0]
     #9 [0000001000 - 0000003000]       TRAMPOLINE ==> [0000001000 - 0000003000]
     #10 [0000003000 - 0000007000]      ACPI WAKEUP ==> [0000003000 - 0000007000]
     #11 [0000008000 - 000000a000]          PGTABLE ==> [0000008000 - 000000a000]
     #12 [000000a000 - 000000b000]          PGTABLE ==> [000000a000 - 000000b000]
    [ffffea0000000000-ffffea0007bfffff] PMD -> [ffff880001a00000-ffff880008bfffff] on node 0
    Zone PFN ranges:
     DMA      0x00000000 -> 0x00001000
     DMA32    0x00001000 -> 0x00100000
     Normal   0x00100000 -> 0x00230000
    Movable zone start PFN for each node
    early_node_map[3] active PFN ranges
       0: 0x00000000 -> 0x0000009f
       0: 0x00000100 -> 0x000cfee0
       0: 0x00100000 -> 0x00230000
    On node 0 totalpages: 2096767
     DMA zone: 56 pages used for memmap
     DMA zone: 105 pages reserved
     DMA zone: 3838 pages, LIFO batch:0
     DMA32 zone: 14280 pages used for memmap
     DMA32 zone: 833304 pages, LIFO batch:31
     Normal zone: 17024 pages used for memmap
     Normal zone: 1228160 pages, LIFO batch:31
    ACPI: PM-Timer IO Port: 0x4008
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
    ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
    ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Using ACPI (MADT) for SMP configuration information
    SMP: Allowing 4 CPUs, 0 hotplug CPUs
    nr_irqs_gsi: 24
    PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
    PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
    PM: Registered nosave memory: 00000000cfee0000 - 00000000cfee3000
    PM: Registered nosave memory: 00000000cfee3000 - 00000000cfef0000
    PM: Registered nosave memory: 00000000cfef0000 - 00000000cff00000
    PM: Registered nosave memory: 00000000cff00000 - 00000000e0000000
    PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
    PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
    PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
    Allocating PCI resources starting at cff00000 (gap: cff00000:10100000)
    Booting paravirtualized kernel on bare hardware
    setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
    PERCPU: Embedded 30 pages/cpu @ffff880008e00000 s90392 r8192 d24296 u524288
    pcpu-alloc: s90392 r8192 d24296 u524288 alloc=1*2097152
    pcpu-alloc: [0] 0 1 2 3 
    Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2065302
    Policy zone: Normal
    Kernel command line: BOOT_IMAGE=Mandriva2010.2-Spring root=UUID=68f7f6c7-89cf-482c-b32b-32fc7641106f splash=silent vga=788
    PID hash table entries: 4096 (order: 3, 32768 bytes)
    Checking aperture...
    No AGP bridge found
    Node 0: aperture @ 20000000 size 32 MB
    Aperture pointing to e820 RAM. Ignoring.
    Your BIOS doesn't leave a aperture memory hole
    Please enable the IOMMU option in the BIOS setup
    This costs you 64 MB of RAM
    Mapping aperture over 65536 KB of RAM @ 20000000
    PM: Registered nosave memory: 0000000020000000 - 0000000024000000
    Memory: 8122712k/9175040k available (3848k kernel code, 787972k absent, 264356k reserved, 3395k data, 688k init)
    SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    Hierarchical RCU implementation.
    NR_IRQS:2304
    Console: colour dummy device 80x25
    console [tty0] enabled
    Fast TSC calibration using PIT
    Detected 3013.342 MHz processor.
    Calibrating delay loop (skipped), value calculated using timer frequency.. 6026.67 BogoMIPS (lpj=3013338)
    Security Framework initialized
    TOMOYO Linux initialized
    Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    Mount-cache hash table entries: 256
    tseg: 00cff00000
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    mce: CPU supports 6 MCE banks
    Performance Events: AMD PMU driver.
    ... version:                0
    ... bit width:              48
    ... generic registers:      4
    ... value mask:             0000ffffffffffff
    ... max period:             00007fffffffffff
    ... fixed-purpose events:   0
    ... event mask:             000000000000000f
    ACPI: Checking initramfs for custom DSDT
    ACPI: Core revision 20091214
    ftrace: converting mcount calls to 0f 1f 44 00 00
    ftrace: allocating 15739 entries in 62 pages
    Setting APIC routing to flat
    ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    CPU0: AMD Athlon(tm) II X4 640 Processor stepping 03
    Booting Node   0, Processors  #1 #2 #3 Ok.
    Brought up 4 CPUs
    Total of 4 processors activated (24104.09 BogoMIPS).
    devtmpfs: initialized
    Time: 19:50:02  Date: 03/02/11
    NET: Registered protocol family 16
    node 0 link 0: io port [9000, ffff]
    TOM: 00000000d0000000 aka 3328M
    Fam 10h mmconf [e0000000, e00fffff]
    node 0 link 0: mmio [a0000, bffff]
    node 0 link 0: mmio [d0000000, dfffffff]
    node 0 link 0: mmio [f0000000, fe02ffff]
    node 0 link 0: mmio [e0000000, e06fffff] ==> [e0100000, e06fffff]
    TOM2: 0000000230000000 aka 8960M
    bus: [00, 06] on node 0 link 0
    bus: 00 index 0 io port: [0, ffff]
    bus: 00 index 1 mmio: [a0000, bffff]
    bus: 00 index 2 mmio: [d0000000, dfffffff]
    bus: 00 index 3 mmio: [e0700000, ffffffff]
    bus: 00 index 4 mmio: [e0100000, e06fffff]
    bus: 00 index 5 mmio: [230000000, fcffffffff]
    ACPI: bus type pci registered
    PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    PCI: Using configuration type 1 for base access
    bio: create slab <bio-0> at 0
    ACPI: EC: Look up EC in DSDT
    ACPI: Interpreter enabled
    ACPI: (supports S0 S1 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    ACPI: No dock devices found.
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    pci_root PNP0A03:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
    pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
    pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
    pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
    pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
    pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xfed0ffff] (ignored)
    pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
    pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:02.0: PME# disabled
    pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:03.0: PME# disabled
    pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:06.0: PME# disabled
    pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:07.0: PME# disabled
    pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:0a.0: PME# disabled
    pci 0000:00:11.0: reg 10: [io  0xff00-0xff07]
    pci 0000:00:11.0: reg 14: [io  0xfe00-0xfe03]
    pci 0000:00:11.0: reg 18: [io  0xfd00-0xfd07]
    pci 0000:00:11.0: reg 1c: [io  0xfc00-0xfc03]
    pci 0000:00:11.0: reg 20: [io  0xfb00-0xfb0f]
    pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
    pci 0000:00:11.0: set SATA to AHCI mode
    pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff]
    pci 0000:00:12.1: reg 10: [mem 0xfe02d000-0xfe02dfff]
    pci 0000:00:12.2: reg 10: [mem 0xfe02c000-0xfe02c0ff]
    pci 0000:00:12.2: supports D1 D2
    pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
    pci 0000:00:12.2: PME# disabled
    pci 0000:00:13.0: reg 10: [mem 0xfe02b000-0xfe02bfff]
    pci 0000:00:13.1: reg 10: [mem 0xfe02a000-0xfe02afff]
    pci 0000:00:13.2: reg 10: [mem 0xfe029000-0xfe0290ff]
    pci 0000:00:13.2: supports D1 D2
    pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
    pci 0000:00:13.2: PME# disabled
    pci 0000:00:14.1: reg 10: [io  0x0000-0x0007]
    pci 0000:00:14.1: reg 14: [io  0x0000-0x0003]
    pci 0000:00:14.1: reg 18: [io  0x0000-0x0007]
    pci 0000:00:14.1: reg 1c: [io  0x0000-0x0003]
    pci 0000:00:14.1: reg 20: [io  0xfa00-0xfa0f]
    pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit]
    pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
    pci 0000:00:14.2: PME# disabled
    pci 0000:00:14.5: reg 10: [mem 0xfe028000-0xfe028fff]
    pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
    pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
    pci 0000:01:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
    pci 0000:01:00.0: reg 24: [io  0xaf00-0xaf7f]
    pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
    pci 0000:00:02.0: PCI bridge to [bus 01-01]
    pci 0000:00:02.0:   bridge window [io  0xa000-0xafff]
    pci 0000:00:02.0:   bridge window [mem 0xf8000000-0xfbffffff]
    pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    pci 0000:02:00.0: reg 10: [mem 0xfd400000-0xfd5fffff 64bit]
    pci 0000:02:00.0: supports D1 D2
    pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot
    pci 0000:02:00.0: PME# disabled
    pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
    pci 0000:00:03.0: PCI bridge to [bus 02-02]
    pci 0000:00:03.0:   bridge window [io  0xe000-0xefff]
    pci 0000:00:03.0:   bridge window [mem 0xfd400000-0xfd5fffff]
    pci 0000:00:03.0:   bridge window [mem 0xfda00000-0xfdafffff 64bit pref]
    pci 0000:03:00.0: reg 24: [mem 0xfd7fe000-0xfd7fffff]
    pci 0000:03:00.0: PME# supported from D3hot
    pci 0000:03:00.0: PME# disabled
    pci 0000:03:00.1: reg 10: [io  0xdf00-0xdf07]
    pci 0000:03:00.1: reg 14: [io  0xde00-0xde03]
    pci 0000:03:00.1: reg 18: [io  0xdd00-0xdd07]
    pci 0000:03:00.1: reg 1c: [io  0xdc00-0xdc03]
    pci 0000:03:00.1: reg 20: [io  0xdb00-0xdb0f]
    pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
    pci 0000:00:06.0: PCI bridge to [bus 03-03]
    pci 0000:00:06.0:   bridge window [io  0xd000-0xdfff]
    pci 0000:00:06.0:   bridge window [mem 0xfd700000-0xfd7fffff]
    pci 0000:00:06.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
    pci 0000:04:00.0: reg 10: [mem 0xfdefe000-0xfdefffff 64bit]
    pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
    pci 0000:04:00.0: PME# disabled
    pci 0000:00:07.0: PCI bridge to [bus 04-04]
    pci 0000:00:07.0:   bridge window [io  0xc000-0xcfff]
    pci 0000:00:07.0:   bridge window [mem 0xfde00000-0xfdefffff]
    pci 0000:00:07.0:   bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
    pci 0000:05:00.0: reg 10: [io  0xbe00-0xbeff]
    pci 0000:05:00.0: reg 18: [mem 0xfdbff000-0xfdbfffff 64bit pref]
    pci 0000:05:00.0: reg 20: [mem 0xfdbf8000-0xfdbfbfff 64bit pref]
    pci 0000:05:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
    pci 0000:05:00.0: supports D1 D2
    pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:05:00.0: PME# disabled
    pci 0000:00:0a.0: PCI bridge to [bus 05-05]
    pci 0000:00:0a.0:   bridge window [io  0xb000-0xbfff]
    pci 0000:00:0a.0:   bridge window [mem 0xfdc00000-0xfdcfffff]
    pci 0000:00:0a.0:   bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
    pci 0000:06:0e.0: reg 10: [mem 0xfd9ff000-0xfd9ff7ff]
    pci 0000:06:0e.0: reg 14: [mem 0xfd9f8000-0xfd9fbfff]
    pci 0000:06:0e.0: supports D1 D2
    pci 0000:06:0e.0: PME# supported from D0 D1 D2 D3hot
    pci 0000:06:0e.0: PME# disabled
    pci 0000:00:14.4: PCI bridge to [bus 06-06] (subtractive decode)
    pci 0000:00:14.4:   bridge window [io  0x9000-0x9fff]
    pci 0000:00:14.4:   bridge window [mem 0xfd900000-0xfd9fffff]
    pci 0000:00:14.4:   bridge window [mem 0xfd800000-0xfd8fffff pref]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE3._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    vgaarb: loaded
    PCI: Using ACPI for IRQ routing
    PCI: pci_cache_line_size set to 64 bytes
    pci 0000:00:00.0: address space collision: [mem 0xe0000000-0xffffffff 64bit] already in use
    pci 0000:00:00.0: can't reserve [mem 0xe0000000-0xffffffff 64bit]
    NetLabel: Initializing
    NetLabel:  domain hash size = 128
    NetLabel:  protocols = UNLABELED CIPSOv4
    NetLabel:  unlabeled traffic allowed by default
    Switching to clocksource tsc
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp 00:08: disabling [mem 0x000cdc00-0x000cffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    pnp 00:08: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    pnp 00:08: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    pnp 00:08: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    pnp 00:08: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    pnp 00:08: disabling [mem 0x00100000-0xcfedffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    pnp: PnP ACPI: found 9 devices
    ACPI: ACPI bus type pnp unregistered
    system 00:01: [io  0x04d0-0x04d1] has been reserved
    system 00:01: [io  0x0220-0x0225] has been reserved
    system 00:01: [io  0x0290-0x0294] has been reserved
    system 00:02: [io  0x4100-0x411f] has been reserved
    system 00:02: [io  0x0228-0x022f] has been reserved
    system 00:02: [io  0x040b] has been reserved
    system 00:02: [io  0x04d6] has been reserved
    system 00:02: [io  0x0c00-0x0c01] has been reserved
    system 00:02: [io  0x0c14] has been reserved
    system 00:02: [io  0x0c50-0x0c52] has been reserved
    system 00:02: [io  0x0c6c-0x0c6d] has been reserved
    system 00:02: [io  0x0c6f] has been reserved
    system 00:02: [io  0x0cd0-0x0cd1] has been reserved
    system 00:02: [io  0x0cd2-0x0cd3] has been reserved
    system 00:02: [io  0x0cd4-0x0cdf] has been reserved
    system 00:02: [io  0x4000-0x40fe] has been reserved
    system 00:02: [io  0x4210-0x4217] has been reserved
    system 00:02: [io  0x0b00-0x0b0f] has been reserved
    system 00:02: [io  0x0b10-0x0b1f] has been reserved
    system 00:02: [io  0x0b20-0x0b3f] has been reserved
    system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
    system 00:08: [mem 0xcfee0000-0xcfefffff] could not be reserved
    system 00:08: [mem 0xffff0000-0xffffffff] has been reserved
    system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
    system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
    system 00:08: [mem 0xfff80000-0xfffeffff] has been reserved
    pci 0000:01:00.0: BAR 6: assigned [mem 0xfb000000-0xfb07ffff pref]
    pci 0000:00:02.0: PCI bridge to [bus 01-01]
    pci 0000:00:02.0:   bridge window [io  0xa000-0xafff]
    pci 0000:00:02.0:   bridge window [mem 0xf8000000-0xfbffffff]
    pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    pci 0000:00:03.0: PCI bridge to [bus 02-02]
    pci 0000:00:03.0:   bridge window [io  0xe000-0xefff]
    pci 0000:00:03.0:   bridge window [mem 0xfd400000-0xfd5fffff]
    pci 0000:00:03.0:   bridge window [mem 0xfda00000-0xfdafffff 64bit pref]
    pci 0000:00:06.0: PCI bridge to [bus 03-03]
    pci 0000:00:06.0:   bridge window [io  0xd000-0xdfff]
    pci 0000:00:06.0:   bridge window [mem 0xfd700000-0xfd7fffff]
    pci 0000:00:06.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
    pci 0000:00:07.0: PCI bridge to [bus 04-04]
    pci 0000:00:07.0:   bridge window [io  0xc000-0xcfff]
    pci 0000:00:07.0:   bridge window [mem 0xfde00000-0xfdefffff]
    pci 0000:00:07.0:   bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
    pci 0000:05:00.0: BAR 6: assigned [mem 0xfdb00000-0xfdb1ffff pref]
    pci 0000:00:0a.0: PCI bridge to [bus 05-05]
    pci 0000:00:0a.0:   bridge window [io  0xb000-0xbfff]
    pci 0000:00:0a.0:   bridge window [mem 0xfdc00000-0xfdcfffff]
    pci 0000:00:0a.0:   bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
    pci 0000:00:14.4: PCI bridge to [bus 06-06]
    pci 0000:00:14.4:   bridge window [io  0x9000-0x9fff]
    pci 0000:00:14.4:   bridge window [mem 0xfd900000-0xfd9fffff]
    pci 0000:00:14.4:   bridge window [mem 0xfd800000-0xfd8fffff pref]
    pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    pci 0000:00:02.0: setting latency timer to 64
    pci 0000:00:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    pci 0000:00:03.0: setting latency timer to 64
    pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    pci 0000:00:06.0: setting latency timer to 64
    pci 0000:00:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    pci 0000:00:07.0: setting latency timer to 64
    pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    pci 0000:00:0a.0: setting latency timer to 64
    pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
    pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff]
    pci_bus 0000:01: resource 0 [io  0xa000-0xafff]
    pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff]
    pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
    pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
    pci_bus 0000:02: resource 1 [mem 0xfd400000-0xfd5fffff]
    pci_bus 0000:02: resource 2 [mem 0xfda00000-0xfdafffff 64bit pref]
    pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
    pci_bus 0000:03: resource 1 [mem 0xfd700000-0xfd7fffff]
    pci_bus 0000:03: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
    pci_bus 0000:04: resource 0 [io  0xc000-0xcfff]
    pci_bus 0000:04: resource 1 [mem 0xfde00000-0xfdefffff]
    pci_bus 0000:04: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
    pci_bus 0000:05: resource 0 [io  0xb000-0xbfff]
    pci_bus 0000:05: resource 1 [mem 0xfdc00000-0xfdcfffff]
    pci_bus 0000:05: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref]
    pci_bus 0000:06: resource 0 [io  0x9000-0x9fff]
    pci_bus 0000:06: resource 1 [mem 0xfd900000-0xfd9fffff]
    pci_bus 0000:06: resource 2 [mem 0xfd800000-0xfd8fffff pref]
    pci_bus 0000:06: resource 3 [io  0x0000-0xffff]
    pci_bus 0000:06: resource 4 [mem 0x00000000-0xffffffffffffffff]
    NET: Registered protocol family 2
    IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
    TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    TCP: Hash tables configured (established 524288 bind 65536)
    TCP reno registered
    UDP hash table entries: 4096 (order: 5, 131072 bytes)
    UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    NET: Registered protocol family 1
    pci 0000:01:00.0: Boot video device
    PCI: CLS 64 bytes, default 64
    Trying to unpack rootfs image as initramfs...
    Freeing initrd memory: 5798k freed
    PCI-DMA: Disabling AGP.
    PCI-DMA: aperture base @ 20000000 size 65536 KB
    PCI-DMA: using GART IOMMU.
    PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
    audit: initializing netlink socket (disabled)
    type=2000 audit(1299095401.553:1): initialized
    HugeTLB registered 2 MB page size, pre-allocated 0 pages
    VFS: Disk quotas dquot_6.5.2
    Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    msgmni has been set to 16004
    alg: No test for stdrng (krng)
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    io scheduler noop registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    pcieport 0000:00:02.0: setting latency timer to 64
    pcieport 0000:00:02.0: irq 24 for MSI/MSI-X
    pcieport 0000:00:03.0: setting latency timer to 64
    pcieport 0000:00:03.0: irq 25 for MSI/MSI-X
    pcieport 0000:00:06.0: setting latency timer to 64
    pcieport 0000:00:06.0: irq 26 for MSI/MSI-X
    pcieport 0000:00:07.0: setting latency timer to 64
    pcieport 0000:00:07.0: irq 27 for MSI/MSI-X
    pcieport 0000:00:0a.0: setting latency timer to 64
    pcieport 0000:00:0a.0: irq 28 for MSI/MSI-X
    vesafb: framebuffer at 0xf9000000, mapped to 0xffffc90011800000, using 1875k, total 14336k
    vesafb: mode is 800x600x16, linelength=1600, pages=2
    vesafb: scrolling: redraw
    vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
    Console: switching to colour frame buffer device 100x37
    fb0: VESA VGA frame buffer device
    Linux agpgart interface v0.103
    Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
    brd: module loaded
    input: Macintosh mouse button emulation as /devices/virtual/input/input0
    PNP: No PS/2 controller found. Probing ports directly.
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    rtc_cmos 00:04: RTC can wake from S4
    rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one month, 242 bytes nvram
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    PM: Resume from disk failed.
    registered taskstats version 1
     Magic number: 3:932:848
    rtc_cmos 00:04: setting system clock to 2011-03-02 19:50:02 UTC (1299095402)
    BIOS EDD facility v0.16 2004-Jun-25, 3 devices found
    Freeing unused kernel memory: 688k freed
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    usbcore: registered new interface driver hiddev
    usbcore: registered new interface driver usbhid
    usbhid: USB HID core driver
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    ehci_hcd 0000:00:12.2: EHCI Host Controller
    ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:12.2: debug port 1
    ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000
    ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
    usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
    usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb1: Product: EHCI Host Controller
    usb usb1: Manufacturer: Linux 2.6.33.7-desktop-2mnb ehci_hcd
    usb usb1: SerialNumber: 0000:00:12.2
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 6 ports detected
    ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    ehci_hcd 0000:00:13.2: EHCI Host Controller
    ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
    ehci_hcd 0000:00:13.2: debug port 1
    ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000
    ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
    usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
    usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb2: Product: EHCI Host Controller
    usb usb2: Manufacturer: Linux 2.6.33.7-desktop-2mnb ehci_hcd
    usb usb2: SerialNumber: 0000:00:13.2
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 6 ports detected
    ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    ohci_hcd 0000:00:12.0: OHCI Host Controller
    ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
    ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000
    usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
    usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb3: Product: OHCI Host Controller
    usb usb3: Manufacturer: Linux 2.6.33.7-desktop-2mnb ohci_hcd
    usb usb3: SerialNumber: 0000:00:12.0
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 3 ports detected
    ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    ohci_hcd 0000:00:12.1: OHCI Host Controller
    ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
    ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000
    usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
    usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb4: Product: OHCI Host Controller
    usb usb4: Manufacturer: Linux 2.6.33.7-desktop-2mnb ohci_hcd
    usb usb4: SerialNumber: 0000:00:12.1
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 3 ports detected
    ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    ohci_hcd 0000:00:13.0: OHCI Host Controller
    ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
    ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000
    usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
    usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb5: Product: OHCI Host Controller
    usb usb5: Manufacturer: Linux 2.6.33.7-desktop-2mnb ohci_hcd
    usb usb5: SerialNumber: 0000:00:13.0
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 3 ports detected
    ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    ohci_hcd 0000:00:13.1: OHCI Host Controller
    ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
    ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000
    usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
    usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb6: Product: OHCI Host Controller
    usb usb6: Manufacturer: Linux 2.6.33.7-desktop-2mnb ohci_hcd
    usb usb6: SerialNumber: 0000:00:13.1
    hub 6-0:1.0: USB hub found
    hub 6-0:1.0: 3 ports detected
    ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    ohci_hcd 0000:00:14.5: OHCI Host Controller
    ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
    ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000
    usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
    usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb7: Product: OHCI Host Controller
    usb usb7: Manufacturer: Linux 2.6.33.7-desktop-2mnb ohci_hcd
    usb usb7: SerialNumber: 0000:00:14.5
    hub 7-0:1.0: USB hub found
    hub 7-0:1.0: 2 ports detected
    uhci_hcd: USB Universal Host Controller Interface driver
    SCSI subsystem initialized
    usb 1-1: new high speed USB device using ehci_hcd and address 2
    libata version 3.00 loaded.
    ahci 0000:00:11.0: version 3.0
    ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    ahci 0000:00:11.0: irq 29 for MSI/MSI-X
    ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
    ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc 
    scsi0 : ahci
    scsi1 : ahci
    scsi2 : ahci
    scsi3 : ahci
    ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 29
    ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 29
    ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 29
    ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 29
    ahci 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
    ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
    ahci 0000:03:00.0: setting latency timer to 64
    scsi4 : ahci
    scsi5 : ahci
    ata5: SATA max UDMA/133 abar m8192@0xfd7fe000 port 0xfd7fe100 irq 18
    ata6: SATA max UDMA/133 abar m8192@0xfd7fe000 port 0xfd7fe180 irq 18
    usb 1-1: New USB device found, idVendor=03f0, idProduct=7a11
    usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    usb 1-1: Product: Photosmart B109a-m
    usb 1-1: Manufacturer: HP
    usb 1-1: SerialNumber: MY9CGC10SV05C7
    usb 1-5: new high speed USB device using ehci_hcd and address 3
    ata2: SATA link down (SStatus 0 SControl 300)
    usb 1-5: New USB device found, idVendor=05e3, idProduct=070e
    usb 1-5: New USB device strings: Mfr=0, Product=1, SerialNumber=2
    usb 1-5: Product: USB Storage
    usb 1-5: SerialNumber: 000000009317
    ata5: SATA link down (SStatus 0 SControl 300)
    ata6: SATA link down (SStatus 0 SControl 300)
    ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    ata4.00: ATA-7: WDC WD1600YD-01NVB1, 10.02E01, max UDMA/133
    ata4.00: 321672960 sectors, multi 16: LBA48 NCQ (depth 1), AA
    ata4.00: configured for UDMA/133
    ata3.00: HPA detected: current 625140335, native 625142448
    ata3.00: ATA-8: WDC WD3201ABYS-01B9A0, 13.01C02, max UDMA/133
    ata3.00: 625140335 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    ata3.00: configured for UDMA/133
    ata1.00: HPA detected: current 625140335, native 625142448
    ata1.00: ATA-8: WDC WD3201ABYS-01B9A0, 13.01C02, max UDMA/133
    ata1.00: 625140335 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    ata1.00: configured for UDMA/133
    scsi 0:0:0:0: Direct-Access     ATA      WDC WD3201ABYS-0 13.0 PQ: 0 ANSI: 5
    scsi 2:0:0:0: Direct-Access     ATA      WDC WD3201ABYS-0 13.0 PQ: 0 ANSI: 5
    sd 2:0:0:0: [sdb] 625140335 512-byte logical blocks: (320 GB/298 GiB)
    sd 0:0:0:0: [sda] 625140335 512-byte logical blocks: (320 GB/298 GiB)
    sd 2:0:0:0: [sdb] Write Protect is off
    sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    scsi 3:0:0:0: Direct-Access     ATA      WDC WD1600YD-01N 10.0 PQ: 0 ANSI: 5
    sd 3:0:0:0: [sdc] 321672960 512-byte logical blocks: (164 GB/153 GiB)
    sdb:
    sd 3:0:0:0: [sdc] Write Protect is off
    sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
    sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sdc:
    sda: sdb1 sdb2 < sdc1
    sd 3:0:0:0: [sdc] Attached SCSI disk
    sda1 sda2 < sdb5 sda5 sdb6 >
    sd 2:0:0:0: [sdb] Attached SCSI disk
    sda6 sda7 sda8 sda9 >
    sd 0:0:0:0: [sda] Attached SCSI disk
    pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
    pata_jmicron 0000:03:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    pata_jmicron 0000:03:00.1: setting latency timer to 64
    scsi6 : pata_jmicron
    scsi7 : pata_jmicron
    ata7: PATA max UDMA/100 cmd 0xdf00 ctl 0xde00 bmdma 0xdb00 irq 19
    ata8: PATA max UDMA/100 cmd 0xdd00 ctl 0xdc00 bmdma 0xdb08 irq 19
    usb 5-3: new full speed USB device using ohci_hcd and address 2
    pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    scsi8 : pata_atiixp
    scsi9 : pata_atiixp
    ata9: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
    ata10: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
    usb 5-3: New USB device found, idVendor=046d, idProduct=c52b
    usb 5-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    usb 5-3: Product: USB Receiver
    usb 5-3: Manufacturer: Logitech
    input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.0/usb5/5-3/5-3:1.0/input/input1
    generic-usb 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:13.0-3/input0
    input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.0/usb5/5-3/5-3:1.1/input/input2
    generic-usb 0003:046D:C52B.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:13.0-3/input1
    generic-usb 0003:046D:C52B.0003: hiddev1,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.0-3/input2
    ata9.01: ATAPI: HL-DT-STDVD-RAM GH22NP20, 1.00, max UDMA/66
    ata9.01: configured for UDMA/66
    scsi 8:0:1:0: CD-ROM            HL-DT-ST DVD-RAM GH22NP20 1.00 PQ: 0 ANSI: 5
    usb 6-1: new full speed USB device using ohci_hcd and address 2
    ata10.00: ATAPI: HL-DT-ST DVDRAM GSA-H62N, CL00, max UDMA/100
    ata10.00: configured for UDMA/100
    scsi 9:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-H62N  CL00 PQ: 0 ANSI: 5
    usb 6-1: New USB device found, idVendor=046d, idProduct=c52b
    usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    usb 6-1: Product: USB Receiver
    usb 6-1: Manufacturer: Logitech
    input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.0/input/input3
    generic-usb 0003:046D:C52B.0004: input,hidraw3: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:13.1-1/input0
    input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.1/input/input4
    generic-usb 0003:046D:C52B.0005: input,hiddev2,hidraw4: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:13.1-1/input1
    generic-usb 0003:046D:C52B.0006: hiddev3,hidraw5: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.1-1/input2
    usb 6-3: new low speed USB device using ohci_hcd and address 3
    usb 6-3: New USB device found, idVendor=051d, idProduct=0002
    usb 6-3: New USB device strings: Mfr=3, Product=1, SerialNumber=2
    usb 6-3: Product: Back-UPS CS 650 FW:817.v4.I USB FW:v4
    usb 6-3: Manufacturer: American Power Conversion
    usb 6-3: SerialNumber: QB0652237320  
    EXT4-fs (sda1): mounted filesystem with ordered data mode
    Tomoyo security MAC extension available but disabled by default. If you want to
    enable and use it, ccs-tools package must be installed.
    generic-usb 0003:051D:0002.0007: hiddev4,hidraw6: USB HID v1.10 Device [American Power Conversion Back-UPS CS 650 FW:817.v4.I USB FW:v4] on usb-0000:00:13.1-3/input0
    udev: starting version 153
    r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    r8169 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    r8169 0000:05:00.0: setting latency timer to 64
    r8169 0000:05:00.0: irq 30 for MSI/MSI-X
    eth0: RTL8168d/8111d at 0xffffc900117aa000, 6c:f0:49:e0:59:8e, XID 083000c0 IRQ 30
    EDAC MC: Ver: 2.1.0 Sep 20 2010
    input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
    ACPI: Power Button [PWRB]
    input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
    ACPI: Power Button [PWRF]
    EDAC amd64_edac:  Ver: 3.3.0 Sep 20 2010
    EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
    EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
    Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
    (Note that use of the override may cause unknown side effects.)
    amd64_edac: probe of 0000:00:18.2 failed with error -22
    ACPI: I/O resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SOR1 [0xb00-0xb0f]
    ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    xhci_hcd 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    xhci_hcd 0000:04:00.0: setting latency timer to 64
    xhci_hcd 0000:04:00.0: xHCI Host Controller
    xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 8
    xhci_hcd 0000:04:00.0: irq 19, io mem 0xfdefe000
    usb usb8: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor
    usb usb8: New USB device found, idVendor=1d6b, idProduct=0003
    usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb8: Product: xHCI Host Controller
    usb usb8: Manufacturer: Linux 2.6.33.7-desktop-2mnb xhci_hcd
    usb usb8: SerialNumber: 0000:04:00.0
    xHCI xhci_add_endpoint called for root hub
    xHCI xhci_check_bandwidth called for root hub
    hub 8-0:1.0: USB hub found
    hub 8-0:1.0: 4 ports detected
    Initializing USB Mass Storage driver...
    scsi10 : usb-storage 1-1:1.3
    scsi11 : usb-storage 1-5:1.0
    usbcore: registered new interface driver usb-storage
    USB Mass Storage support registered.
    sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    sr 8:0:1:0: Attached scsi CD-ROM sr0
    ohci1394 0000:06:0e.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
    sr 9:0:0:0: Attached scsi CD-ROM sr1
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    sd 2:0:0:0: Attached scsi generic sg1 type 0
    sd 3:0:0:0: Attached scsi generic sg2 type 0
    sr 8:0:1:0: Attached scsi generic sg3 type 5
    sr 9:0:0:0: Attached scsi generic sg4 type 5
    ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22]  MMIO=[fd9ff000-fd9ff7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
    HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    Linux video capture interface: v2.00
    cx23885 driver version 0.0.2 loaded
    cx23885 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    CORE cx23885[0]: subsystem: 0070:8101, board: Hauppauge WinTV-HVR1700 [card=8,autodetected]
    tveeprom 0-0050: Hauppauge model 81519, rev B4F5, serial# 7341503
    tveeprom 0-0050: MAC address is 00-0D-FE-70-05-BF
    tveeprom 0-0050: tuner model is NXP 18271C2 (idx 155, type 54)
    tveeprom 0-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4)
    tveeprom 0-0050: audio processor is CX23885 (idx 39)
    tveeprom 0-0050: decoder processor is CX23885 (idx 33)
    tveeprom 0-0050: has no radio
    cx23885[0]: hauppauge eeprom: model=81519
    cx25840 2-0044: cx23885 A/V decoder found @ 0x88 (cx23885[0])
    cx25840 2-0044: firmware: requesting v4l-cx23885-avcore-01.fw
    cx25840 2-0044: loaded v4l-cx23885-avcore-01.fw firmware (16382 bytes)
    cx23885_dvb_register() allocating 1 frontend(s)
    cx23885[0]: cx23885 based dvb card
    tda829x 1-0042: type set to tda8295
    tda18271 1-0060: creating new instance
    TDA18271HD/C2 detected @ 1-0060
    ieee1394: Host added: ID:BUS[0-00:1023]  GUID[005f7cb0006cf049]
    DVB: registering new adapter (cx23885[0])
    DVB: registering adapter 0 frontend 0 (NXP TDA10048HN DVB-T)...
    cx23885_dev_checkrevision() Hardware revision = 0xa5
    cx23885[0]/0: found at 0000:02:00.0, rev: 4, irq: 19, latency: 0, mmio: 0xfd400000
    cx23885 0000:02:00.0: setting latency timer to 64
    IRQ 19/cx23885[0]: IRQF_DISABLED is not guaranteed on shared IRQs
    NET: Registered protocol family 10
    lo: Disabled Privacy Extensions
    nvidia: module license 'NVIDIA' taints kernel.
    Disabling lock debugging due to kernel taint
    nvidia 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    nvidia 0000:01:00.0: setting latency timer to 64
    vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
    NVRM: loading NVIDIA UNIX x86_64 Kernel Module  260.19.36  Tue Jan 18 16:56:11 PST 2011
    device-mapper: uevent: version 1.0.3
    device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
    scsi 10:0:0:0: Direct-Access     HP       Photosmart B109a 1.00 PQ: 0 ANSI: 5
    sd 10:0:0:0: Attached scsi generic sg5 type 0
    scsi 11:0:0:0: Direct-Access     Generic  STORAGE DEVICE   9317 PQ: 0 ANSI: 0
    sd 11:0:0:0: Attached scsi generic sg6 type 0
    sd 10:0:0:0: [sdd] Attached SCSI removable disk
    scsi 11:0:0:1: Direct-Access     Generic  STORAGE DEVICE   9317 PQ: 0 ANSI: 0
    sd 11:0:0:1: Attached scsi generic sg7 type 0
    sd 11:0:0:0: [sde] Attached SCSI removable disk
    scsi 11:0:0:2: Direct-Access     Generic  STORAGE DEVICE   9317 PQ: 0 ANSI: 0
    sd 11:0:0:2: Attached scsi generic sg8 type 0
    scsi 11:0:0:3: Direct-Access     Generic  STORAGE DEVICE   9317 PQ: 0 ANSI: 0
    sd 11:0:0:3: Attached scsi generic sg9 type 0
    sd 11:0:0:1: [sdf] Attached SCSI removable disk
    sd 11:0:0:2: [sdg] Attached SCSI removable disk
    sd 11:0:0:3: [sdh] Attached SCSI removable disk
    kjournald starting.  Commit interval 5 seconds
    EXT3-fs (sda6): using internal journal
    EXT3-fs (sda6): mounted filesystem with ordered data mode
    kjournald starting.  Commit interval 5 seconds
    EXT3-fs (sda7): using internal journal
    EXT3-fs (sda7): mounted filesystem with ordered data mode
    kjournald starting.  Commit interval 5 seconds
    EXT3-fs (sdc1): using internal journal
    EXT3-fs (sdc1): mounted filesystem with ordered data mode
    kjournald starting.  Commit interval 5 seconds
    EXT3-fs (sda9): using internal journal
    EXT3-fs (sda9): mounted filesystem with ordered data mode
    EXT4-fs (sda5): mounted filesystem with ordered data mode
    kjournald starting.  Commit interval 5 seconds
    EXT3-fs (sda8): using internal journal
    EXT3-fs (sda8): mounted filesystem with ordered data mode
    loop: module loaded
    it87: Found IT8720F chip at 0x228, revision 8
    it87: Routing internal VCCH to in7
    it87: in3 is VCC (+5V)
    it87: in7 is VCCH (+5V Stand-By)
    input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input7
    r8169: eth0: link up
    r8169: eth0: link up
    NET: Registered protocol family 17
    ip_tables: (C) 2000-2006 Netfilter Core Team
    Netfilter messages via NETLINK v0.30.
    nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
    CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
    nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
    sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
    NF_TPROXY: Transparent proxy support initialized, version 4.1.0
    NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
    ip_set version 4 loaded
    ctnetlink v0.93: registering with nfnetlink.
    ClusterIP Version 0.8 loaded successfully
    xt_time: kernel timezone is +1000
    u32 classifier
       Actions configured 
    netfilter PSD loaded - (c) astaro AG
    IFWLOG: register target
    eth0: no IPv6 routers present
    usb 1-1: USB disconnect, address 2
    [root@dethermy john]#

     

    After :-

     

    sd 2:0:0:0: Attached scsi generic sg1 type 0
    sd 3:0:0:0: Attached scsi generic sg2 type 0
    sr 8:0:1:0: Attached scsi generic sg3 type 5
    sr 9:0:0:0: Attached scsi generic sg4 type 5
    ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22]  MMIO=[fd9ff000-fd9ff7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
    HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    Linux video capture interface: v2.00
    cx23885 driver version 0.0.2 loaded
    cx23885 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    CORE cx23885[0]: subsystem: 0070:8101, board: Hauppauge WinTV-HVR1700 [card=8,autodetected]
    tveeprom 0-0050: Hauppauge model 81519, rev B4F5, serial# 7341503
    tveeprom 0-0050: MAC address is 00-0D-FE-70-05-BF
    tveeprom 0-0050: tuner model is NXP 18271C2 (idx 155, type 54)
    tveeprom 0-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4)
    tveeprom 0-0050: audio processor is CX23885 (idx 39)
    tveeprom 0-0050: decoder processor is CX23885 (idx 33)
    tveeprom 0-0050: has no radio
    cx23885[0]: hauppauge eeprom: model=81519
    cx25840 2-0044: cx23885 A/V decoder found @ 0x88 (cx23885[0])
    cx25840 2-0044: firmware: requesting v4l-cx23885-avcore-01.fw
    cx25840 2-0044: loaded v4l-cx23885-avcore-01.fw firmware (16382 bytes)
    cx23885_dvb_register() allocating 1 frontend(s)
    cx23885[0]: cx23885 based dvb card
    tda829x 1-0042: type set to tda8295
    tda18271 1-0060: creating new instance
    TDA18271HD/C2 detected @ 1-0060
    ieee1394: Host added: ID:BUS[0-00:1023]  GUID[005f7cb0006cf049]
    DVB: registering new adapter (cx23885[0])
    DVB: registering adapter 0 frontend 0 (NXP TDA10048HN DVB-T)...
    cx23885_dev_checkrevision() Hardware revision = 0xa5
    cx23885[0]/0: found at 0000:02:00.0, rev: 4, irq: 19, latency: 0, mmio: 0xfd400000
    cx23885 0000:02:00.0: setting latency timer to 64
    IRQ 19/cx23885[0]: IRQF_DISABLED is not guaranteed on shared IRQs
    NET: Registered protocol family 10
    lo: Disabled Privacy Extensions
    nvidia: module license 'NVIDIA' taints kernel.
    Disabling lock debugging due to kernel taint
    nvidia 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    nvidia 0000:01:00.0: setting latency timer to 64
    vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
    NVRM: loading NVIDIA UNIX x86_64 Kernel Module  260.19.36  Tue Jan 18 16:56:11 PST 2011
    device-mapper: uevent: version 1.0.3
    device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
    scsi 10:0:0:0: Direct-Access     HP       Photosmart B109a 1.00 PQ: 0 ANSI: 5
    sd 10:0:0:0: Attached scsi generic sg5 type 0
    scsi 11:0:0:0: Direct-Access     Generic  STORAGE DEVICE   9317 PQ: 0 ANSI: 0
    sd 11:0:0:0: Attached scsi generic sg6 type 0
    sd 10:0:0:0: [sdd] Attached SCSI removable disk
    scsi 11:0:0:1: Direct-Access     Generic  STORAGE DEVICE   9317 PQ: 0 ANSI: 0
    sd 11:0:0:1: Attached scsi generic sg7 type 0
    sd 11:0:0:0: [sde] Attached SCSI removable disk
    scsi 11:0:0:2: Direct-Access     Generic  STORAGE DEVICE   9317 PQ: 0 ANSI: 0
    sd 11:0:0:2: Attached scsi generic sg8 type 0
    scsi 11:0:0:3: Direct-Access     Generic  STORAGE DEVICE   9317 PQ: 0 ANSI: 0
    sd 11:0:0:3: Attached scsi generic sg9 type 0
    sd 11:0:0:1: [sdf] Attached SCSI removable disk
    sd 11:0:0:2: [sdg] Attached SCSI removable disk
    sd 11:0:0:3: [sdh] Attached SCSI removable disk
    kjournald starting.  Commit interval 5 seconds
    EXT3-fs (sda6): using internal journal
    EXT3-fs (sda6): mounted filesystem with ordered data mode
    kjournald starting.  Commit interval 5 seconds
    EXT3-fs (sda7): using internal journal
    EXT3-fs (sda7): mounted filesystem with ordered data mode
    kjournald starting.  Commit interval 5 seconds
    EXT3-fs (sdc1): using internal journal
    EXT3-fs (sdc1): mounted filesystem with ordered data mode
    kjournald starting.  Commit interval 5 seconds
    EXT3-fs (sda9): using internal journal
    EXT3-fs (sda9): mounted filesystem with ordered data mode
    EXT4-fs (sda5): mounted filesystem with ordered data mode
    kjournald starting.  Commit interval 5 seconds
    EXT3-fs (sda8): using internal journal
    EXT3-fs (sda8): mounted filesystem with ordered data mode
    loop: module loaded
    it87: Found IT8720F chip at 0x228, revision 8
    it87: Routing internal VCCH to in7
    it87: in3 is VCC (+5V)
    it87: in7 is VCCH (+5V Stand-By)
    input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input7
    r8169: eth0: link up
    r8169: eth0: link up
    NET: Registered protocol family 17
    ip_tables: (C) 2000-2006 Netfilter Core Team
    Netfilter messages via NETLINK v0.30.
    nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
    CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
    nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
    sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
    NF_TPROXY: Transparent proxy support initialized, version 4.1.0
    NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
    ip_set version 4 loaded
    ctnetlink v0.93: registering with nfnetlink.
    ClusterIP Version 0.8 loaded successfully
    xt_time: kernel timezone is +1000
    u32 classifier
       Actions configured 
    netfilter PSD loaded - (c) astaro AG
    IFWLOG: register target
    eth0: no IPv6 routers present
    usb 1-1: USB disconnect, address 2
    usb 1-3: new high speed USB device using ehci_hcd and address 4
    hub 1-0:1.0: unable to enumerate USB device on port 3
    usb 8-1: new SuperSpeed USB device using xhci_hcd and address 2
    xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
    xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
    xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
    xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
    usb 8-1: New USB device found, idVendor=152d, idProduct=2509
    usb 8-1: New USB device strings: Mfr=1, Product=11, SerialNumber=3
    usb 8-1: Product: Usb production
    usb 8-1: Manufacturer: JMicron
    usb 8-1: SerialNumber: 00A123456789
    scsi12 : usb-storage 8-1:1.0
    scsi 12:0:0:0: Direct-Access     Jmicron  Corp.            0000 PQ: 0 ANSI: 2 CCS
    sd 12:0:0:0: Attached scsi generic sg5 type 0
    sd 12:0:0:0: [sdd] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
    xhci_hcd 0000:04:00.0: WARN: Stalled endpoint
    sd 12:0:0:0: [sdd] Write Protect is off
    sd 12:0:0:0: [sdd] Mode Sense: 28 00 00 00
    sd 12:0:0:0: [sdd] Assuming drive cache: write through
    xhci_hcd 0000:04:00.0: WARN: Stalled endpoint
    sd 12:0:0:0: [sdd] Assuming drive cache: write through
    sdd: sdd1 sdd2 < sdd5 sdd6 sdd7 >
    xhci_hcd 0000:04:00.0: WARN: Stalled endpoint
    sd 12:0:0:0: [sdd] Assuming drive cache: write through
    sd 12:0:0:0: [sdd] Attached SCSI disk
    xhci_hcd 0000:04:00.0: WARN: transfer error on endpoint
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: USB disconnect, address 2
    sd 12:0:0:0: [sdd] Unhandled error code
    sd 12:0:0:0: [sdd] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
    sd 12:0:0:0: [sdd] CDB: Read(10): 28 00 57 54 66 00 00 00 08 00
    end_request: I/O error, dev sdd, sector 1465148928
    Buffer I/O error on device sdd, logical block 183143616
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    hub 8-0:1.0: unable to enumerate USB device on port 1
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 1-3: new high speed USB device using ehci_hcd and address 5
    hub 1-0:1.0: unable to enumerate USB device on port 3
    usb 8-1: new SuperSpeed USB device using xhci_hcd and address 2
    xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
    xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
    xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
    xhci_hcd 0000:04:00.0: WARN: short transfer on control ep
    usb 8-1: New USB device found, idVendor=152d, idProduct=2509
    usb 8-1: New USB device strings: Mfr=1, Product=11, SerialNumber=3
    usb 8-1: Product: Usb production
    usb 8-1: Manufacturer: JMicron
    usb 8-1: SerialNumber: 00A123456789
    scsi13 : usb-storage 8-1:1.0
    scsi 13:0:0:0: Direct-Access     Jmicron  Corp.            0000 PQ: 0 ANSI: 2 CCS
    sd 13:0:0:0: Attached scsi generic sg5 type 0
    sd 13:0:0:0: [sdd] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
    xhci_hcd 0000:04:00.0: WARN: Stalled endpoint
    sd 13:0:0:0: [sdd] Write Protect is off
    sd 13:0:0:0: [sdd] Mode Sense: 28 00 00 00
    sd 13:0:0:0: [sdd] Assuming drive cache: write through
    xhci_hcd 0000:04:00.0: WARN: Stalled endpoint
    sd 13:0:0:0: [sdd] Assuming drive cache: write through
    sdd: sdd1 sdd2 < sdd5 sdd6 sdd7 >
    xhci_hcd 0000:04:00.0: WARN: Stalled endpoint
    sd 13:0:0:0: [sdd] Assuming drive cache: write through
    sd 13:0:0:0: [sdd] Attached SCSI disk
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    sd 13:0:0:0: Device offlined - not ready after error recovery
    usb 8-1: USB disconnect, address 2
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    hub 8-0:1.0: unable to enumerate USB device on port 1
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    hub 8-0:1.0: unable to enumerate USB device on port 1
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    hub 8-0:1.0: unable to enumerate USB device on port 1
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    hub 8-0:1.0: unable to enumerate USB device on port 1
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    hub 8-0:1.0: unable to enumerate USB device on port 1
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    hub 8-0:1.0: unable to enumerate USB device on port 1
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    hub 8-0:1.0: unable to enumerate USB device on port 1
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    hub 8-0:1.0: unable to enumerate USB device on port 1
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    hub 8-0:1.0: unable to enumerate USB device on port 1
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    hub 8-0:1.0: unable to enumerate USB device on port 1
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    hub 8-0:1.0: unable to enumerate USB device on port 1
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    hub 8-0:1.0: unable to enumerate USB device on port 1
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    hub 8-0:1.0: unable to enumerate USB device on port 1
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    hub 8-0:1.0: unable to enumerate USB device on port 1
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    hub 8-0:1.0: unable to enumerate USB device on port 1
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    hub 8-0:1.0: unable to enumerate USB device on port 1
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    hub 8-0:1.0: unable to enumerate USB device on port 1
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    hub 8-0:1.0: unable to enumerate USB device on port 1
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    hub 8-0:1.0: unable to enumerate USB device on port 1
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    hub 8-0:1.0: unable to enumerate USB device on port 1
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    hub 8-0:1.0: unable to enumerate USB device on port 1
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    hub 8-0:1.0: unable to enumerate USB device on port 1
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    hub 8-0:1.0: unable to enumerate USB device on port 1
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    hub 8-0:1.0: unable to enumerate USB device on port 1
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    hub 8-0:1.0: unable to enumerate USB device on port 1
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    hub 8-0:1.0: unable to enumerate USB device on port 1
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    hub 8-0:1.0: unable to enumerate USB device on port 1
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    hub 8-0:1.0: unable to enumerate USB device on port 1
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    hub 8-0:1.0: unable to enumerate USB device on port 1
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    hub 8-0:1.0: unable to enumerate USB device on port 1
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    hub 8-0:1.0: unable to enumerate USB device on port 1
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    hub 8-0:1.0: unable to enumerate USB device on port 1
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    hub 8-0:1.0: unable to enumerate USB device on port 1
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    hub 8-0:1.0: unable to enumerate USB device on port 1
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    hub 8-0:1.0: unable to enumerate USB device on port 1
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    hub 8-0:1.0: unable to enumerate USB device on port 1
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    hub 8-0:1.0: unable to enumerate USB device on port 1
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    hub 8-0:1.0: unable to enumerate USB device on port 1
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    hub 8-0:1.0: unable to enumerate USB device on port 1
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    hub 8-0:1.0: unable to enumerate USB device on port 1
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    hub 8-0:1.0: unable to enumerate USB device on port 1
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    hub 8-0:1.0: unable to enumerate USB device on port 1
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    hub 8-0:1.0: unable to enumerate USB device on port 1
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    hub 8-0:1.0: unable to enumerate USB device on port 1
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    hub 8-0:1.0: unable to enumerate USB device on port 1
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    usb 8-1: Device not responding to set address.
    usb 8-1: Device not responding to set address.
    usb 8-1: device not accepting address 0, error -71
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    hub 8-0:1.0: unable to enumerate USB device on port 1
    hub 8-0:1.0: cannot disable port 1 (err = -32)
    [root@dethermy john]#

  14. Hi Ian.

    Yes it does say no scanners detected, this also includes an Epson Photo 2450 connected by firewire.

    I shouldn't need to do what you suggest because everything worked effortlessly in the prior install of 2010.2 and nothing was changed in between these two latest installs.

    That is what makes me think I am missing something obvious . Come to think off it perhaps an updated package is at fault as seems to be the case in the GoogleEarth discussed in the other post on that topic.

    Unless someone else has a suggestion or two, I might wait a couple of days and see if the problem disappears after newer updates

     

    Cheers. John.

  15. Thanks Isadora.

    I tried just now and it said "No such file or Directory".

     

    Thanks Ian. I think that is the answer. I think I will wait for the next updated version, whenever that is. It's not like it is a critical application after all.

    I truly can't be bothered doing a manual install off the earlier version. At least I feel now that it was not a mistep on my part.

     

    Thank you, also Ken and Isadora for responding.

     

    Cheers. John.

  16. Hi Ken, you are correct. I forgot about that. Head is a little foggy today, hence the lapse of having put the post in the wrong forum. The installer is the only thing that comes from PLF.

     

    GoogleEarth installs normally with no error messages. It puts an Icon on the desktop which when clicked says that will start GoogleEarth but it just times out and then zilch.

     

    What routine do you mean when you say use Konsole to start it ???.

     

    Cheers. John.

  17. I am running 2010.2 which was a clean install.

    In the previous install which was also 2010.2, I had no trouble running the Scanner part of the device and the Printer has run AOK in both this and the earlier installs of this OS version.

     

    The unit is HP PhotoSmart b109a-m and I have taken care of the models.dat file correction that was necessary and also ensured that lib64sane-hpaio1 is installed.

    Although I have gone over it countless times, I still think I am missing something obvious.

     

    Thoughts or suggestions anyone, please.

     

    Cheers. John.

  18. I have installed GoogleEarth seemingly OK however when clicked on it does not start up. I am running Mandriva2010.2 x64 (Third time clean install same result)

     

    I have followed up on past posts that I could find here and at Mandriva but may have missed some. Did all suggested. The version I am trying to run is the one from PLF.

     

    Any ideas are welcome, please.

     

    Cheers. John

     

     

    Sorry Mods. Could you please move this to the appropriate Software forum. Wasn't thinking too clearly.

    Thanks. JB

     

     

    [moved from Hardware by spinynorman]

×
×
  • Create New...