Fresh news!
I send a mail to Sitecom and they answered me that Sitecom WL-170 uses "ralink rt2561 chipset"!
So rt61 doesn't work properly! Now the problem is find this driver I think... BTW, I post some results:
# lsmod
Module Size Used by
ndiswrapper 185396 0
cpufreq_ondemand 5052 0
cpufreq_conservative 6116 0
cpufreq_powersave 1280 0
powernow_k7 7144 0
freq_table 3460 1 powernow_k7
raw 6592 1
md5 3584 1
ipv6 234016 8
snd_seq_dummy 2532 0
snd_seq_oss 31136 0
snd_seq_midi_event 5696 1 snd_seq_oss
snd_seq 46960 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_pcm_oss 48960 0
snd_mixer_oss 16896 1 snd_pcm_oss
snd_via82xx 24256 0
gameport 11112 1 snd_via82xx
snd_ac97_codec 83900 1 snd_via82xx
snd_pcm 79784 3 snd_pcm_oss,snd_via82xx,snd_ac97_codec
snd_timer 20548 2 snd_seq,snd_pcm
snd_page_alloc 8392 2 snd_via82xx,snd_pcm
snd_mpu401_uart 5664 1 snd_via82xx
snd_rawmidi 19616 1 snd_mpu401_uart
snd_seq_device 6828 4 snd_seq_dummy,snd_seq_oss,snd_seq,snd_rawmidi
snd 46116 11 snd_seq_oss,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_via82xx,snd_ac97_codec,snd_pcm
,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
soundcore 7008 1 snd
via_rhine 19588 0
mii 4704 1 via_rhine
af_packet 16392 0
floppy 55444 0
pcmcia 20648 2
yenta_socket 20328 2
rsrc_nonstatic 11200 1 yenta_socket
pcmcia_core 43300 3 pcmcia,yenta_socket,rsrc_nonstatic
video 14052 0
thermal 10920 0
tc1100_wmi 5092 0
processor 17876 2 powernow_k7,thermal
fan 3172 0
container 3008 0
button 4848 0
battery 7460 0
ac 3268 0
ide_cd 37988 0
loop 14504 0
nls_iso8859_15 4224 1
nls_cp850 4480 1
vfat 10592 1
fat 45980 1 vfat
supermount 31956 1
via_agp 7584 1
agpgart 29032 1 via_agp
nvram 7400 0
usbmouse 4160 0
usbhid 44544 0
joydev 8128 0
tsdev 5984 0
uhci_hcd 29136 0
usbcore 108348 5 ndiswrapper,usbmouse,usbhid,uhci_hcd
evdev 7648 1
ext3 124744 1
jbd 48568 1 ext3
# uname -r
2.6.12-12mdk
# dmesg
Linux version 2.6.12-12mdk (apatard@n1.mandriva.com) (gcc version 4.0.1 (4.0.1-5mdk for Mandriva Linux release 2006.0)) #1 Fri Sep 9 18:15:22 CEST 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000f7f0000 (usable)
BIOS-e820: 000000000f7f0000 - 000000000f7fffc0 (ACPI data)
BIOS-e820: 000000000f7fffc0 - 000000000f800000 (ACPI NVS)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
247MB LOWMEM available.
On node 0 totalpages: 63472
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 59376 pages, LIFO batch:31
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 OID_00 ) @ 0x000e4010
ACPI: RSDT (v001 OID_00 RSDT_000 0x30303030 & 0x00010007) @ 0x0f7ffbc0
ACPI: FADT (v002 INSYDE FACP_000 0x00000100 & 0x00010007) @ 0x0f7ffac0
ACPI: BOOT (v001 INSYDE SYS_BOOT 0x00000100 & 0x00010007) @ 0x0f7ffb50
ACPI: DBGP (v001 INSYDE SYS_DBGP 0x00000100 & 0x00010007) @ 0x0f7ffb80
ACPI: DSDT (v001 INSYDE VT8362 0x00001000 MSFT 0x0100000d) @ 0x00000000
ACPI: PM-Timer IO Port: 0x1008
Allocating PCI resources starting at 0f800000 (gap: 0f800000:f0780000)
Built 1 zonelists
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (011f1000)
Initializing CPU#0
Kernel command line: BOOT_IMAGE=linux root=305 splash=silent
bootsplash: silent mode.
PID hash table entries: 1024 (order: 10, 16384 bytes)
Detected 1200.559 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 247172k/253888k available (2348k kernel code, 6144k reserved, 717k data, 268k init, 0k highmem, 0k BadRAM)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 2375.68 BogoMIPS (lpj=1187840)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0183f9ff c1cbf9ff 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0183f9ff c1cbf9ff 00000000 00000000 00000000 00000000 00000000
Enabling disabled K7/SSE Support.
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After all inits, caps: 0383f9ff c1cbf9ff 00000000 00000020 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD mobile AMD Athlon(tm) XP 1400+ stepping 00
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: Looking for DSDT in initrd... not found.
ACPI: setting ELCR to 0200 (from 0c00)
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 180k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xe8a64, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050309
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Disabling VIA memory write queue (PCI ID 0305, rev 80): [55] 3c & 1f -> 1c
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Embedded Controller [EC0] (gpe 1)
ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs *10)
ACPI: PCI Interrupt Link [LNKD] (IRQs 10 *11)
Linux Plug and Play Support v0.97 ? Adam Belay
pnp: PnP ACPI init
pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c04
pnp: PnP ACPI: found 9 devices
PnPBIOS: Disabled
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Cannot allocate resource region 0 of device 0000:00:0a.0
pnp: 00:06: ioport range 0x1600-0x167f has been reserved
pnp: 00:06: ioport range 0x2c8-0x2cf has been reserved
pnp: 00:06: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:06: ioport range 0x1000-0x105f could not be reserved
Simple Boot Flag at 0x37 set to 0x1
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1172843962.683:0): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
Applying VIA southbridge workaround.
vesafb: framebuffer at 0x90000000, mapped to 0xd0080000, using 3750k, total 7104k
vesafb: mode is 800x600x16, linelength=1600, pages=6
vesafb: protected mode interface info at c000:7926
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 34430 bytes,<6>...found (800x600, 34382 bytes, v3).
Console: switching to colour frame buffer device 93x30
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
PNP: PS/2 Controller [PNP0303:KBC,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
pktcdvd: v0.2.0a 2004-07-14 Jens Axboe (axboe@suse.de) and petero2@telia.com
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:11.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8231 (rev 10) IDE UDMA100 controller on pci0000:00:11.1
ide0: BM-DMA at 0x1100-0x1107, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1108-0x110f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: IC25N020ATCS04-0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: UJDA730 DVD/CDRW, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 39070080 sectors (20003 MB) w/1768KiB Cache, CHS=38760/16/63, UDMA(100)
hda: cache flushes not supported
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 >
mice: PS/2 mouse device common for all mice
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
NET: Registered protocol family 1
ACPI wakeup devices:
LID BAT0 PBTN AUDI MODM USB0 USB1 LAN0
ACPI: (supports S0 S3 S4 S4bios S5)
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
devfs_mk_dev: could not append to parent for md/0
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
input: AT Translated Set 2 keyboard on isa0060/serio0
alps.c: Enabling hardware tapping
input: PS/2 Mouse on isa0060/serio4
input: AlpsPS/2 ALPS GlidePoint on isa0060/serio4
kjournald starting. Commit interval 5 seconds
EXT3-fs: hda5: orphan cleanup on readonly fs
ext3_orphan_cleanup: deleting unreferenced inode 38313
ext3_orphan_cleanup: deleting unreferenced inode 38312
ext3_orphan_cleanup: deleting unreferenced inode 38311
ext3_orphan_cleanup: deleting unreferenced inode 38309
ext3_orphan_cleanup: deleting unreferenced inode 38308
ext3_orphan_cleanup: deleting unreferenced inode 38003
ext3_orphan_cleanup: deleting unreferenced inode 38019
ext3_orphan_cleanup: deleting unreferenced inode 38015
ext3_orphan_cleanup: deleting unreferenced inode 38013
ext3_orphan_cleanup: deleting unreferenced inode 38012
ext3_orphan_cleanup: deleting unreferenced inode 38011
ext3_orphan_cleanup: deleting unreferenced inode 38010
ext3_orphan_cleanup: deleting unreferenced inode 37993
ext3_orphan_cleanup: deleting unreferenced inode 38007
ext3_orphan_cleanup: deleting unreferenced inode 37999
ext3_orphan_cleanup: deleting unreferenced inode 37946
ext3_orphan_cleanup: deleting unreferenced inode 37746
ext3_orphan_cleanup: deleting unreferenced inode 98060
EXT3-fs: hda5: 18 orphan inodes deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 268k freed
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:11.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:11.2: UHCI Host Controller
uhci_hcd 0000:00:11.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:11.2: irq 11, io base 0x00001200
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ts: Compaq touchscreen protocol output
usb 1-2: new low speed USB device using uhci_hcd and address 2
usbcore: registered new driver hiddev
input: USB HID v1.00 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye?] on usb-0000:00:11.2-2
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
usbcore: registered new driver usbmouse
drivers/usb/input/usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
bootsplash: status on console 0 changed to on
EXT3 FS on hda5, internal journal
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 ? Dave Jones
agpgart: Detected VIA Twister-K/KT133x/KM133 chipset
agpgart: AGP aperture is 64M @ 0xa0000000
Supermount version 2.0.4 for kernel 2.6
loop: loaded (max 8 devices)
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ACPI: AC Adapter [ADP0] (on-line)
ACPI: Battery Slot [BAT0] (battery absent)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Thermal Zone [THRM] (72 C)
ACPI: Video Device [VGA0] (multi-head: yes rom: no post: no)
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
Yenta: CardBus bridge found at 0000:00:0a.0 [1025:001d]
Yenta O2: res at 0x94/0xD4: 00/ea
Yenta O2: enabling read prefetch/write burst
Yenta: ISA IRQ mask 0x0038, PCI irq 11
Socket status: 30000821
cs: IO port probe 0xc00-0xcff: clean.
cs: IO port probe 0x100-0x4ff: excluding 0x378-0x37f
cs: IO port probe 0xa00-0xaff: clean.
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
NET: Registered protocol family 17
via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
PCI: Enabling device 0000:00:12.0 (0001 -> 0003)
ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
eth0: VIA Rhine II at 0x1e800, 00:c0:9f:11:c3:69, IRQ 11.
eth0: MII PHY found at address 1, status 0x7809 advertising 01e1 Link 0000.
eth0: link down
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:11.5 to 64
hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hdc: drive_cmd: error=0x04 { AbortedCommand }
ide: failed opcode was: 0xec
hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hdc: drive_cmd: error=0x04 { AbortedCommand }
ide: failed opcode was: 0xec
hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hdc: drive_cmd: error=0x04 { AbortedCommand }
ide: failed opcode was: 0xec
NET: Registered protocol family 10
Disabled Privacy Extensions on device c03c5760(lo)
IPv6 over IPv4 tunneling driver
powernow: PowerNOW! Technology present. Can scale: frequency and voltage.
Detected 1200.214 MHz processor.
powernow: SGTC: 10000
powernow: Minimum speed 500 MHz. Maximum speed 1200 MHz.
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 10117 bytes, v3).
bootsplash: status on console 0 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 10117 bytes, v3).
bootsplash: status on console 1 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 10117 bytes, v3).
bootsplash: status on console 2 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 10117 bytes, v3).
bootsplash: status on console 3 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 10117 bytes, v3).
bootsplash: status on console 4 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 10117 bytes, v3).
bootsplash: status on console 5 changed to on
eth0: no IPv6 routers present
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
ndiswrapper version 1.38 loaded (preempt=no,smp=no)
ndiswrapper: driver rt61 (Ralink Technology, Inc.,12/01/2006, 1.02.00.0000) loaded
PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:02:00.0 to 64
ndiswrapper: using IRQ 11
wlan0: ethernet device 00:0c:f6:25:7e:8e using serialized NDIS driver: rt61, version: 0x10001, NDIS version: 0x500, vendor: 'IEEE 802.11g Wireless Card.', 1814:0301.5.conf
wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
usbcore: registered new driver ndiswrapper
ndiswrapper (add_wep_key:820): adding encryption key 1 failed (C0010015)
wlan0: no IPv6 routers present
ndiswrapper (add_wep_key:820): adding encryption key 1 failed (C0010015)
ndiswrapper (add_wep_key:820): adding encryption key 1 failed (C0010015)
wlan0: no IPv6 routers present
ndiswrapper (add_wep_key:820): adding encryption key 1 failed (C0010015)
ndiswrapper (add_wep_key:820): adding encryption key 1 failed (C0010015)
wlan0: no IPv6 routers present
let me know what do you think...