Jump to content

RUMPLE4SKIN

Members
  • Posts

    38
  • Joined

  • Last visited

RUMPLE4SKIN's Achievements

New Here

New Here (1/7)

0

Reputation

  1. Not a problemn, I think I made the decision that I was going to anyway and that is going to try out FC4. Thank you for all your help though, really rumple
  2. ok, I re-configured and manually entered my IP, mask, Gateway and DNS leaving search domain blank. I then edited /etc/resolv.conf as you had me do before. I then rebooted and still nothing. Is there anything else I can do, you have been so helpful. thank you very much
  3. /etc/sysconfig/network-scripts, showed that eth0 is the one being used because it contained the IP address. So then I went into /etc/resolv.conf and put a # where you suggested. When I did that, I went in to MCC to verify, that IP was removed but so was the domain name. So when I recreated the connection again to reveal the domain name, I went back to /etc/resolv.conf and the # I added were gone. So I redid the whole thing, rebooted and the # were removed again. I'm assuming I'm not doing something right here. I hate to keep nagging you with this problem, I'm writing all this down and always have, so I felt I was learning more. Thank you
  4. ianw1974, I'm not quite sure what you meant for me to do within that file from above. Also, I noticed anytime I entered my IP etc. manually and set it to DHCP it was not saving that information I just entered, but it would when I set it to static. The connection doesn't work either way. Also 127.0.0.1 is one of my ISPs DNS servers. Thank you yet again :)
  5. static doesn't work either, here is the output of /etc/resolv.conf: search columbus.rr.com local # search columbus.rr.com nameserver 127.0.0.1 nameserver 65.24.7.3 # ppp temp entry I'm assuming an update couldn't of caused somekind of conflict? thank you for the help
  6. I did that right after I ran ifconfig -a and added alias net-pf-10 off. But I did fail to mention, it seems not to be finding the DHCP, after I manuall entered my IP, MASK, GATEWAY, it was seeing a static connection.
  7. I'm using firefox 1.0.2, which I wanted to upgrade to 1.0.7 but wasn't able to. The ifconfig -a output is as follows: [root@Lippy gian]# ifconfig -a eth0 Link encap:Ethernet HWaddr 00:00:C5:5F:01:44 inet6 addr: fe80::200:c5ff:fe5f:144/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5261 errors:0 dropped:0 overruns:0 frame:0 TX packets:16 errors:0 dropped:129 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:251646 (245.7 Kb) TX bytes:1616 (1.5 Kb) Interrupt:16 Base address:0xc000 eth0:9 Link encap:Ethernet HWaddr 00:00:C5:5F:01:44 inet addr:127.255.255.255 Bcast:127.255.255.255 Mask:255.0.0.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:16 Base address:0xc000 eth1 Link encap:Ethernet HWaddr 00:20:ED:36:E7:1D BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:17 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:2682 (2.6 Kb) Interrupt:20 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:424 errors:0 dropped:0 overruns:0 frame:0 TX packets:424 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:31921 (31.1 Kb) TX bytes:31921 (31.1 Kb) sit0 Link encap:IPv6-in-IPv4 inet6 addr: ::65.186.87.50/96 Scope:Compat inet6 addr: ::127.255.255.255/96 Scope:Unknown inet6 addr: ::127.0.0.1/96 Scope:Unknown UP RUNNING NOARP MTU:1480 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) and since it did include sit0, I added alias net-pf-10 off to /etc/modprobe.conf, rebooted and there was no change. My network card is a Intel 21041-Based PCI Ethernet Adapter (Generic), in Windows XP. For some reason, it's recognized by Linux as DEC DecChip 21041-PB Tulip Plus Ethernet Adapter. And this PC has an onboard ethernet, Intel 82801DB ICH4 - LAN Controller with 82562ET/EZ (CNR) PHY [A-1], which in XP I was able to disable in Device Manager, I don't know how or if it needs to be disabled in Linux. Before I had to reinstall the first time, that was not a problem. Thank you very much, rumple
  8. You didn't specify any directory, such as where the file is located. tar -xzvf /what/ever/directory/firefox-1.0.7.installer.tar.gz after it installs, then cd firefox-installer followed by ./firefox-installer
  9. Several days ago, my bootloader somehow got messed up while I was screwing with different options in MCC (that was bad for a novice). Anyway, I ended up reinstalling MandrivaLE2005. At first the internet connection would only stay active until I did what I did in the browser session.As soon as I closed it and tried to connect with another app, there was nothing. So I formatted and tried again and the same thing happened. Finally, when I reinstalled it, the connection was great until I ran EASY_URPMI and UPATES. Only this time I did nothing after updating, and after updating there was absolutely no connection. So to me updating (or one of it's files) caused this, but how am I suppose to know which file, there were 226? So now I'm hoping the experts will help, please Thank you in advance :)
  10. Thank you both for the clarification :)
  11. I'm not sure what you mean by that?
  12. I'm wanting to build rom source mplayer. I have all the files necessary, however, the link for the instructions always hangs until it times out. I thought the site was down, but it did the same thing for a few days. Is there anyway, or does anyone know how I could get those instructions or a website that might have them? Thank you in advance,
  13. Hello, I was attempting to update through MCC, and I was getting a message saying it was impossible to do so, and my contrib, updates and main needed removed and reinstalled. So I removed them from MCC, easy_urpmi would install contrib and updates, but it wouldnt connect to the ftp for main. This was this error I got, thank you P.S. I got that message for three different servers [moved from Installing Mandriva by spinynorman]
  14. I tried that but forgot the -a, thank you very much
  15. Hi all, I have been unsuccessful in installing VLC. When I run the following command as SU from URL I countue to receive the following message: [root@gian gian]# urpmi libdvdcss2 libdvdplay0 wxvlc vlc-plugin-a52 vlc-plugin-ogg vlc-plugin-mad ftp://ftp.planetmirror.com/pub/plf/mandra...102plf.i586.rpm ftp://ftp.planetmirror.com/pub/plf/mandra...102plf.i586.rpm ...retrieving failed: curl: (19) Given file does not exist ftp://ftp.planetmirror.com/pub/plf/mandra...102plf.i586.rpm ...retrieving failed: curl: (19) Given file does not exist ftp://ftp.planetmirror.com/pub/plf/mandra...102plf.i586.rpm ...retrieving failed: curl: (19) Given file does not exist ...retrieving failed: curl failed: exited with 19 or signal 0 Installation failed, some files are missing: ftp://ftp.planetmirror.com/pub/plf/mandra...102plf.i586.rpm ftp://ftp.planetmirror.com/pub/plf/mandra...102plf.i586.rpm ftp://ftp.planetmirror.com/pub/plf/mandra...102plf.i586.rpm ftp://ftp.planetmirror.com/pub/plf/mandra...102plf.i586.rpm You may want to update your urpmi database ...retrieving failed: curl: (19) Given file does not exist I ran EASY-URPMI (because that's how I thought urpmi was updated) and it said everything already exists. So please someone let me know what I'm missing. Thank you
×
×
  • Create New...