I find Xsine not worth the time because it takes just about for ever to set, it is just seems so complicated.

My old faithful, Totem is totally useless nowdays since it now seems to not play practically most of regular formats it used to play

up until about a year ago.

Svlc and Dragon will play the U-Tube sourced MP4's but with no sound. However they do play MP4's from other sources quite OK. They also play AVI, MOV and other formats quite OK.

Any ideas I can try or explanations, please.

Thanks in advance. John.

Haven't been able to determine if this is possible without using a media server (like XBMC, etc).

Is there something out there that will allow me to stream from my computer to my Xbox360s that would also include the embedded cover art?

I have a ton of mp4 movies and tv shows, all of which have cover art that has been embedded using iTunes in Windows. Lately I've been wanting to go back to using Linux more or less full time (haven't picked a distro, yet) and I'm hoping that I can get this functionality.

I could use Plex, and I would have to with my Roku; but I'm really hoping that there is something else out there for the Xboxes because Plex, as wonderful as it may be, has issues. An example of this would be the fact that it shows Mission Impossible and Mission Impossible 3 as the same title, with the same cover art (hence my desire to have it read the cover art that is already embedded in the file).

I've been reading around and seeing some programs that do parts of what I want to do, but not all.

I could always use a media center, I know, but it would be harder to get that working with the Xbox (especially because I think that the only Media Center option for the 360 is WMC).

I was able to make the pairing OK (BlueDevil found the Creative D80 speaker OK), but I cannot direct the sound to the BT speaker.

Is there anyone who would be able to help me out here...? :unsure:

# Now converting: /home/steve/Desktop/filename.mp4

# DISPLAYED REMAINING TIME MAY BE WRONG!

Writing metadata...

Error opening input file '/home/steve/Desktop//filename.ogg'.

Done.

Any suggestions?

When I took the card out and tried to install the nvidia software in runlevel 3, it said no card detected and would not continue. It said something about kernel sources. I have kernel-sources, gcc and make installed in Mandriva 2007.

Later, I plugged the monitor into the card and when it reached the grub loader, I entered run level one. Then I typed 'login' and logged in. Then I entered root mode, and typed 'mcc' (which was the same as 'drakconf') to enter the Mandriva Control Center in text mode and selected the vesa driver. I left root mode but I couldn't reach the gui by typing 'startx'.

'rpm -q kernel kernel-source' gives:

package kernel is not installed

package kernel-source is not installed

yet in the Mandriva Control Center they are installed.

ffmpeg -f x11grab -r 30 -s 1280x1024 -i :0.0 -f alsa -i hw:1,1 -ac 2 screenrecord.avi

This records screenrecord.avi, and it looks good, but there's no sound.

I tried hw:0,0 (that was the first way I tried it) and got an error message.

aplay -l

gives me this:

**** List of PLAYBACK Hardware Devices ****
card 0: ICE1724 [iCEnsemble ICE1724], device 0: ICE1724 [iCE1724]
 Subdevices: 1/1
 Subdevice #0: subdevice #0
card 0: ICE1724 [iCEnsemble ICE1724], device 1: ICE1724 IEC958 [iCE1724 IEC958]
 Subdevices: 1/1
 Subdevice #0: subdevice #0
card 2: NVidia [HDA NVidia], device 0: AD198x Analog [AD198x Analog]
 Subdevices: 1/1
 Subdevice #0: subdevice #0
card 2: NVidia [HDA NVidia], device 1: AD198x Digital [AD198x Digital]
 Subdevices: 1/1
 Subdevice #0: subdevice #0

What I'd really like is to be able to do a screencast that captures all the application sounds and mic input, but just the app sounds would be awesome.

Any suggestions?

Thanks!

Thanks,

Kieth

I forgot to mention that I use xine for my dvds and music.

There is two ways to find the channels to Me Tv and I have always used a scan file that came with the Me Tv (uk-blackhill) but now that and all the other scan files do not work anymore.

I know my DVB-T stick is still working as I am able to watch one BBC channel with VLC and in Windows I get around 6 different channels but I would love to continue using Me Tv as I like the simple GUI and ease of use.

I am using Mandriva 2010.2 and Me Tv 1.1.5 and my DVB-T stick is a Hauppauge Nova-T WinTV DVB-T/TNT/Freeview TV receiver

I am using gnome desktop and have lost all sound. Nothing from any players, firefox flash, youtube, nothing.

I have tried disabling pulseaudio, that did nothing.

I should mention that this has been an issue for a couple of months, I suppose after I took some updates, but I can't be sure.

I used to have sound when I first upgrade from 2009.1 to 2010.1, but now I don't even have the startup sound or shutdown sound.

How can I figure out what the problem is?

thanx in advance...

I have installed the phonon-xine packages, and that system is chosen as the backend in the KDE 4 desktop configuration.

Audacity has no problems playing the MP3 files, and Kaffeine also plays them OK. However with Amarok there is no sound.

Strange, that.

Oh, and every time I run Amarok, the KDE Wallet annoyance pops up. I do not want to use the KDE Wallet, so if somebody could tell me how to rid myself of that annoyance, please.....

Thanks,

Banjo

(_)=='=~

Edit: I changed the MP3 file association to Kaffeine, and I can now download and play MP3 files from the internet... but I am still curious about why Amarok can't play them.

Running Mandriva 2010 64 bit OS. The system starts on one monitor while loading and switches to the other monitor to operate.

I have tried to install the newest Nvidia drivers. Do I have to change something in command mode to get this setup to work?

I have tried a million things but cant get sound to work on my speakers. Please find my alsa-info in the link below.

http://www.alsa-project.org/db/?f=0405d0351aeb457a3a2d3b13ff5e45918b432a6e

I have tried changing my modprobe.conf file

have disabled pulse-audio....

Help please.

Just installed 2010.2, works great.

Problem is when i click on the sound applet and choose mixer, kmix shows only one channel "internal audio analog stereo" no others are available, used to be just fine in 2010, where I could choose from a multitude of channels. I need to get to the channels to mute one of them (can't remember which one) because with it unmuted my mouse makes a noise through the speakers when it is moved, it's very annoying

Any ideas what I need to do, the driver is the same as far as I can recollect and it's using Alsa with Pulse audio enabled.

Thanks

mencoder dvd://$1 -aid 128 -oac lavc -ovc frameno -o frameno.avi 
mencoder dvd://$1 -oac copy -alang en -ovc lavc -lavcopts vcodec=mpeg4:vhq:vbitrate=629:vpass=1 -o $2.mpeg
mencoder dvd://$1 -oac copy -alang en -ovc lavc -lavcopts vcodec=mpeg4:vhq:vbitrate=629:vpass=2 -o $2.mpeg

The resulting mpeg looks okay but has Spanish subtitles in it. Anybody have any idea what I'm doing wrong?

[moved from Software by spinynorman]

/usr/lib64/va/drivers/fglrx_drv_video.so

but that file doesn't exist anywhere on the system. In fact, va/drivers doesn't exist. All the fglrx files are in /usr/lib64/fglrx. None of the files are named fglrx_drv_video.so. They're named:

libAMDXvBA.cap* libaticalcl.so* libatiuki.so.1.0* libGL.so.1@ xorg/

libAMDXvBA.so.1@ libaticaldd.so* libfglrx_dm.so.1.0* libGL.so.1.2*

libAMDXvBA.so.1.0* libaticalrt.so* libfglrx_gamma.so.1@ libXvBAW.so.1@

libatiadlxx.so* libatiuki.so.1@ libfglrx_gamma.so.1.0* libXvBAW.so.1.0*

Does anyone know what to do to make it not lock up? Thank you!

[moved from Software by spinynorman]

I'm trying to rip a CD but:

1. Kaudiocreator says the file or folder /Wav/Track 01.wav can't be found (I'm trying to encode into mp3 not wav)

2. Grip doesn' even start. When run from commandline it says segmentation fault (man, how I hate this error!!!)

3. sound-juicer start and scans the disc but quits unexcpectedly with another segmentation fault once I tell it to start the extraction.

Can somebody else rip CD in Mandriva 2010 or is it just my problem? Also, the machine had 2GB RAM, but I recently upgraded to 4GB. Oh, the operating system is 32-bit.

Any ideas?

[moved from Software by Greg2]

PLF Free

PLF Non-free

Main

Main Updates

Contrib

Contrib Updates

Non-free

Non-free Updates

How can I submit a request for a wxCam rpm to be added? if that's even possible now?

Anyone know of another security camera program that's already in the Mandriva repositories? I would like something that detects motion.

xrandr --output VGA-0 --mode 1024x768 --rotate normal --pos 0x0 --output HDMI-0 --mode 1920x1080 --rotate normal --right-of VGA-0 --pos 1024x0

I added 1600x900 & 1600x1200 modelines to xorg.conf. If I add "1600x900" or "1600x1200" to the first line of the 8,15,16,24 depths, it goes into a distorted 640x480. 1280X1024 is the highest resolution it can produce.

I'm using onboard VIA graphics & the HP 2009v monitor.

I am able to see the laptop's screen on the TV, but the TV always cuts some of it off. Another odd thing: I normally use higher resolutions on the laptop screens, but when I tried to reset them to 1360x768 (which was offered as a setting in MCC) the screens did not actually seem to change resolution on the laptops' screens. Going into MCC afterwards shows the 1360x768 res, but still the screens look like the normal higher resolutions. I have attempted to reset he screen ratios on the TV, but no luck.

Does anyone have any suggestions?

Recentely, I can't play .avi files with gxine, xine, mplayer, kmplayer, VLC or kaffeine, but Dragon Player does work.

I also can't rip and encode a DVD (tried dvd::rip, acidrip and k3b).

I think that both problems may be connected to a missing codec or library but don't know how to fix the problem.

With xine and mplayer, I get audio only and the following errors:

XINE

===

Video Codec: XviD (XVID) null

mplayer

=====

mplayer: error while loading shared libraries: libopencore-amrnb.so.0:

cannot open shared object file: No such file or directory

All the usual codecs and libraries (including XVID and libopencore) are installed

[solomon@shlomo1 ~]$ rpm -qa|grep xvid

xvidcap-1.1.7-2plf2010.0

libxvid4-1.2.2-1plf2010.0

[solomon@shlomo1 ~]$ rpm -qa|grep codec

win32-codecs-1.9-3plf2010.1

jakarta-commons-codec-javadoc-1.4-1mdv2010.1

helixplayer-helix-codecs-1.0.9-5mdv2009.0

jakarta-commons-codec-1.4-1mdv2010.1

real-codecs-1.2-5plf2010.1

xanim-codecs-1.0-7plf2010.1

[solomon@shlomo1 ~]$ rpm -qa|grep libdvdcss

libdvdcss2-1.2.10-2plf2010.0

[solomon@shlomo1 ~]$ rpm -qa|grep libopencore

libopencore-amr0-0.1.2-1plf2010.1

BUT

[solomon@shlomo1 ~]$ ldd /usr/bin/mplayer

linux-gate.so.1 => (0xffffe000)

libncurses.so.5 => /lib/libncurses.so.5 (0xb779d000)

<<<< snip snip snip >>>>

libbs2b.so.0 => /usr/lib/libbs2b.so.0 (0xb6cae000)

libstdc .so.6 => /usr/lib/libstdc .so.6 (0xb6bbd000)

libopencore-amrnb.so.0 => not found

libopencore-amrwb.so.0 => not found

<<<< snip snip snip >>>>

I may have a problem with an incorrect version of libopencore because:

[solomon@shlomo1 ~]$ locate libopencore

/usr/lib/libopencore-amrnb.so.0.0.2

/usr/lib/libopencore-amrwb.so.0.0.2

/usr/share/doc/libopencore-amr0

/usr/share/doc/libopencore-amr0/LICENSE

/usr/share/doc/libopencore-amr0/README

I don't know why this happened or how to fix it. What am I missing?

/usr/sbin/lsof | grep \/dev\/snd

shows the following when sound is working with Kaffeine.

pulseaudi  1129 user  mem       CHR     116,48                7229 /dev/snd/pcmC1D0p
pulseaudi  1129 user   20u      CHR      116,0      0t0       3030 /dev/snd/controlC0
pulseaudi  1129 user   28u      CHR     116,48      0t0       7229 /dev/snd/pcmC1D0p
pulseaudi  1129 user   36u      CHR     116,32      0t0       7233 /dev/snd/controlC1
pulseaudi  1129 user   42u      CHR     116,32      0t0       7233 /dev/snd/controlC1

When using TVtime (sound not working)

/usr/sbin/lsof | grep \/dev\/snd

shows:

pulseaudi  1129 user   20u      CHR      116,0      0t0       3030 /dev/snd/controlC0
pulseaudi  1129 user   36u      CHR     116,32      0t0       7233 /dev/snd/controlC1
pulseaudi  1129 user   42u      CHR     116,32      0t0       7233 /dev/snd/controlC1

Why is sound not working in TVtime? Does TVtime not work with pulse audio?

• takes almost three minutes just to recognize when an audio CD has been inserted into the CD-ROM, and
• takes three times as long to copy an audio CD as the older version!

What can I do to make Brasero as fast as it used to be?

In the html page, several parameters are passed to the flash player, including the following:

   'streamer' : 'rtmp://ip.address/vod',
  'file' : 'reallylongalphanumericstring',
  'javascriptid' : 'video',
  'type' : 'encrypt',
  'enablejs' : 'true'

I've also got the url to the swf file used to play the video. My question is, what do I have to give to rtmpdump to download the stream for later?

I've tried this:

rtmpdump -r rtmp://ip.address/vod -y reallylongalphanumericstring -W http://url.to/player.swf -o output.flv

but I just get the error:

Connecting ...
INFO: Connected...
ERROR: rtmp server sent error
ERROR: rtmp server requested close

I also tried the options -l 2 (to specify encryption), -a video (to specify the application name), but nothing works. I also tried the verbose option but just see things like:

DEBUG: HandShake: Genuine Adobe Flash Media Server
DEBUG: HandShake: Handshaking finished....
DEBUG: RTMP_Connect1, handshaked
DEBUG: Invoking connect
INFO: Connected...

DEBUG: Property: <Name:              level, STRING:	error>
DEBUG: Property: <Name:               code, STRING:	NetConnection.Connect.Rejected>
DEBUG: Property: <Name:        description, STRING:	Connection failed.>

which doesn't bring me much closer. It seems to be at least trying to use encryption and handshaking, but just gets a rejection message.

Has anyone done something similar to this with more success?

I cannot start it from K-menu nor from terminal. This is the info in terminal:

[dude67@localhost ~]$ amarok -v
Qt: 4.6.2
KDE Development Platform: 4.4.3 (KDE 4.4.3)
Amarok: 2.3.1
[dude67@localhost ~]$ amarok -d
Calling appendChild() on a null node does nothing.
Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
amarok(26812)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
amarok(26812)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
amarok(26812)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
QGraphicsLinearLayout::removeAt: invalid index 1
amarok(26812)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
<unknown program name>(26811)/: Communication problem with  "amarok" , it probably crashed. 
Error message was:  "org.freedesktop.DBus.Error.NoReply" : " "Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken." " 

[dude67@localhost ~]$ 

[moved from Software by spinynorman]

Problem is the TV reads Mpeg1 and Mpeg2 according to the documentation. Most of my stuff is in *.AVI format.

I tried for several hours using VLC to carry out the conversion but I kept getting the error message "VLC could not open the encoder". I have installed every codec I could find, but still got the same message.

I hove confirmed that using

ffmpeg -i input.avi -sameq output.mpg

output.mpg does indeed play on the TV.

By using ffmpeg as above is the output file a mpeg1 or mpeg2? And is mpeg2 better than mpeg1? Any other advice most appreciated.

I don't know any other way but to do a hard reset.

I'm using flash-player-plugin-10.1.53.64-1plf2010.0.i586

Mandriva One 2010.0

I'm very much a newbie, but I have been running Mandriva since Jan. I'm happy to post any logs you can point me to.

[moved from Software by spinynorman]

many thanks . Pampered

[moved from Forum Discussion by Greg2]

As I couldn't find it in the 2008.1 repositories I compiled it myself from source, it compiled without issues.

How come it's not available from Mandriva or at least in the plf archives?

It seems like a very useful and stable/mature software.

I might be able to make a Mandriva 2008.1 rpm out of it (I'm not sure it would be conformant to all Mandriva guidelines, which I don't have knowledge of), but I guess that would be pointless as Mandriva wouldn't take a rpm for it's repositories from some 'random user' anyway?

Edited to add link to my rpm package for Mandriva.

You can download a rpm package of a recent svn (development) version (newer than the 0.9.3 release) from my website at:

http://www.linuxtech.net/downloads/handbra...ndriva_rpm.html

My question is what do I need that will convert ogg to mp3.

Thanks,

Kieth

I have my own server now (reuse of former “salonâ€). And I thought it would be nice to have this server hooked up to the HiFi, and thus enable any PC on the LAN to send sound to the HiFi!

Setup was not straightforward, none the least because Mandriva's paprefs seems to be partly broken, and there's ZERO documentation on Pulseaudio networking on Mandriva. Still, I managed; all in all, it's just a matter of:

— adding

load-module module-native-protocol-tcp
load-module module-zeroconf-publish

to /etc/pulse/default.pa on the (Debian) server,

— adding

load-module module-zeroconf-discover

to /etc/pulse/default.pa on the (Mandriva) client,

— managing authentication, either through ACL or with cookies.

Alternately, the whole zeroconf parts can be replaced by a single line on the client side (I got this line thanks to paman; it was probably generated by zeroconf-discover in the first place):

load-module module-tunnel-sink server=[my_server_IP]:4713 sink=alsa_output.hw_0 format=s16le channels=2 rate=44100 sink_name=tunnel.sphinx.local.alsa_output.hw_0 channel_map=front-left,front-right

Anyway, I still have two problems, which are probably related:

1/ Very chopped sound, and freezed video, when using the tunnelled sink

When I play a wav file with VLC, I only get an occasional bit of sound once in a while, even though VLC's slider seems to run fine.

Curiously, when I play the same wav file with mplayer, the sound gets perfectly to the speakers. However, mplayer itself seems to be lost. It displays a line about like this:

A:   0.1 (00.1) of 1.0 (00:01.0)  0.1% 

with no apparent trend up in the numbers and a regular flash of “unknown†(if I saw correctly) between the first pair of brackets.

As for video, still with mplayer, it takes ages to actually start, and then, I have sound but no video, and mplayer is extremely slow to respond to key strokes.

I must add that networking itself is not at fault. If, instead of relying on the tunnelled sink, I change of server with

PULSE_SERVER=my_server mplayer ~/my_wav_file.wav

then it is as good as with a local sink (which is not perfect, see below)…

So it is obviously a tunnel-specific problem. Unfortunately, changing of PA server is not an option for me, because Mandriva's pavucontrol (pulseaudio 0.9.21) seems unable to connect to Debian's daemon (pulseaudio 0.9.10): I get an error about pa_context_get_card_info_list being “Not supportedâ€.

2/ Spurious pauses in video playback when using local sinks

Now with local playback. As soon as a remote sink is available, be it through zeroconf, or directly with the tunnel-sink module, then local video playback on local sinks with any player (VLC, mplayer, xine) plays fine, EXCEPT (that's a big except…) every 5 minutes or so, there's a more-or-less-15-second pause in playback!

So for now, I'm back to square one, with both “module-zeroconf-discover†and “module-tunnel-sink†disabled on the client side (no Pulseaudio network)…

Is there a Pulseaudio veteran here that would have advice, tips, or anything to help me?

Thanks,

Yves.

Friends of mine have scanned their collection to .nrg files, but those are sadly not usable (also not on Win or OSX) other than to burn to cd, and they are non-compressed (or at least, they seem to be from the file sizes).

So I've explained it's better to rip to flac, but it would be nice if they could convert their current rips to flac as well.

I tried and managed using Nero for Linux, but I need to burn each .nrg to a cd (rw of course), then rip that one, then burn the next. So the speed and the quality both have me worried a bit. Plus, it wears out my burner.

Is there any way to create a virtual cd burner under Linux?

That way I can use nero to 'burn' the .nrg files to the virtual drive, then rip it as usual.

Please note the following:

I have not found any program that can use audio .nrg files under Linux. I have looked at nrg2iso, but that works for data discs only. There are some other similar things that I found which also didn't work, I forgot the names but can find those again, if necessary.

I also looked at audiofs and cdfs, which seem to be unmaintained since a while, in any case, I couldn't find any way to employ those.

[moved from Software by spinynorman]

After an update (of mostly kde stuff) the sound stopped working. I can only get it work if I disable auto-login.

I did search the forums and the web and didn't find anything using the same search terms as the title of this thread.

I haved tried different display managers but the results are the same.

The system is Mandriva 2010 Free.

Hope someone can help.

Thanks

lynch

I have no problems to install XvidCap, but the videos it produces are quite odd, and they do not match what happens on the screen.

You can get the idea with the following picture:

However, nothing better that a video recorded using XvidCap to asses the problem:

http://www.filefactory.com/file/b569h5d/n/test-Xvidcap.mpeg

The program does not give many clues to what goes wrong. Thus, running it from the console in verbose mode writes the following messages:

[ramom@favo ~]$ xvidcap -v --audio no --gui yes

Current settings:

flags = 3587

capture mode = multi-frame

position = 192x144+0+41

rescale output to = 100

frames per second = 10,00

file pattern = test-%04d.mpeg

file format = AUTO

video encoding = AUTO

audio codec = AUTO

verbose level = 1

frame start no = 0

frames to store = 0

time to capture = 0 sec

autocontinue = no

input source = shm (2)

capture pointer = white

capture audio = no

- input = /dev/dsp

- sample rate = 44100

- bit rate = 64000

- channels = 2

animate command = mplayer "${XVFILE}" &

make video command= xterm -e "echo not needed for multi-frame capture; echo hit enter to dismiss; read"

edit frame command= xterm -e "echo none specified; echo hit enter to dismiss; read"

[ramom@favo ~]$

Any clue is welcome.

I just updated to 2010.0.

As usual I want to allow everyone to access the soundcard at once ...

I have done this in the past just by using the dmix feature of alsa and it worked somehow.

But what is actually the preferred method to do this ?

Using Mandriva 2010.0 with

lspci-excerpt:

00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03)

I have experimented with pulseaudio, but it doesn't work. If the first user runs a flash video in firefox, the second

cannot watch a movie in mplayer or run xmms ....

Any pointers / suggestions ?

Thank you for your time

My sound works.

I want to enable the onboard hardware synth in my soundcard. Dell Inspirion 7500 laptop with EES Tech. Maestro soundcard. Really the 450MHz CPU needs a break.

Actually I thought the soundcard synth was the reason alsa was started.

Someone please point me in the right direction.

Thank you.

[moved from Other Linux Distros by spinynorman - welcome aboard :)]

I am able to access the web page from anywhere on the network in the house.

I have tried to see the server with Amarok running on the same machine, iTunes on windows boxes in the house and Winamp with DAAP plugin on windows boxes, nothing wants to see it.

the avahi-daemon appears to be running and on boot it looks like everything registers (well, nothing fails, but I don't now what I should see)

Log file from a start as root:

2009-12-29 13:45:11 (b739c6c0): Firefly Version svn-1696: Starting with debuglevel 5
2009-12-29 13:45:11 (b739c6c0): Loaded plugin /usr/lib/mt-daapd/plugins/rsp.so (rsp/svn-1696)
2009-12-29 13:45:11 (b739c6c0): Loaded plugin /usr/lib/mt-daapd/plugins/ssc-script.so (ssc-script/svn-1696)
2009-12-29 13:45:11 (b739c6c0): Loaded plugin /usr/lib/mt-daapd/plugins/out-daap.so (daap/svn-1696)
2009-12-29 13:45:11 (b739c6c0): Plugin loaded: daap/svn-1696
2009-12-29 13:45:11 (b739c6c0): Plugin loaded: ssc-script/svn-1696
2009-12-29 13:45:11 (b739c6c0): Plugin loaded: rsp/svn-1696
2009-12-29 13:45:11 (b739c6c0): Starting signal handler
2009-12-29 13:45:11 (b739c6c0): Initializing database
2009-12-29 13:45:14 (b739c6c0): Starting web server from /usr/share/mt-daapd/admin-root on port 3689
2009-12-29 13:45:14 (b739c6c0): Listening on port 3689
2009-12-29 13:45:14 (b739c6c0): Starting server thread
2009-12-29 13:45:14 (b739c6c0): Serving 6008 songs.  Startup complete in 3 seconds
2009-12-29 13:45:14 (b739c6c0): Rescanning database
2009-12-29 13:45:14 (b6348b70): Cannot resolve /usr/share/mt-daapd/admin-root//upnp-basic.xml
2009-12-29 13:45:14 (b6348b70): Thread 0: Entering ws_returnerror (404: Not found)
2009-12-29 13:45:14 (b6348b70): Cannot resolve /usr/share/mt-daapd/admin-root//upnp-basic.xml
2009-12-29 13:45:14 (b6348b70): Thread 1: Entering ws_returnerror (404: Not found)

I am not sure what the error is from, but the file is definitely not at that location.. I don't see it in the package if I were to build from scratch either.

Any help or what I should look for would be greatly appreciated!

[moved from Everything Linux by spinynorman]

[kieth@host-001 ~]$ mplayer

MPlayer SVN-1.rc3.0.r29554.2plf2010.0-4.4.1 © 2000-2009 MPlayer Team

3DNow supported but disabled

3DNowExt supported but disabled

Usage: mplayer [options] [url|path/]filename

I un-installed it, then re-installed it, to see if it would add any dependent packages. But no, nothing changed.

[moved from Software by spinynorman]

[kieth@host-001 ~]$ firefox
_IceTransSocketUNIXConnect: Cannot connect to non-local host localhost.localdomain
_IceTransSocketUNIXConnect: Cannot connect to non-local host localhost.localdomain

(firefox:3263): GnomeUI-WARNING **: While connecting to session manager:
Could not open network socket.
socket(): Address family not supported by protocol
socket(): Address family not supported by protocol
LoadPlugin: failed to initialize shared library /usr/lib/mozilla/plugins/nppdf.so [/usr/lib/mozilla/plugins/nppdf.so: wrong ELF class: ELFCLASS32]
LoadPlugin: failed to initialize shared library /opt/real/RealPlayer/mozilla/nphelix.so [/opt/real/RealPlayer/mozilla/nphelix.so: wrong ELF class: ELFCLASS32]
LoadPlugin: failed to initialize shared library /home/kieth/.mozilla/plugins/nppdf.s

It complains about plugins, but here are the ones installed.

[kieth@host-001 ~]$ rpm -qa | grep plugin
lib64kipiplugins1-0.7.0-2mdv2010.0
plymouth-plugin-label-0.7.2-7mdv2010.0
lib64gstreamer-plugins-base0.10-0.10.25-2mdv2010.0
mplayerplugin-3.55-5mdv2010.0
soprano-plugin-redland-2.3.1-7mdv2010.0
alsa-plugins-pulse-config-1.0.21-2mdv2010.0
soprano-plugin-sesame2-2.3.1-7mdv2010.0
qt4-database-plugin-sqlite-4.5.3-3mdv2010.0
plymouth-plugin-script-0.7.2-7mdv2010.0
konq-plugins-4.3.0-2mdv2010.0
libalsa-plugins-pulseaudio-1.0.21-2mdv2010.0
xine-plugins-1.1.16.3-2plf2010.0
qca2-plugin-openssl-2.0.2-3mdv2010.0
lib64pt2.6.5-plugins-2.6.5-1mdv2010.0
kipi-plugins-0.7.0-2mdv2010.0
nspluginwrapper-i386-1.3.0-1mdv2010.0
nspluginwrapper-1.3.0-1mdv2010.0
lib64audiocdplugins4-4.3.2-2mdv2010.0
gstreamer0.10-plugins-ugly-0.10.12-6plf2010.0
soprano-plugin-common-2.3.1-7mdv2010.0
lib64konqsidebarplugin4-4.3.2-3mdv2010.0
java-1.6.0-sun-plugin-1.6.0.16-1mdv2010.0
alsa-plugins-doc-1.0.21-2mdv2010.0
qt4-database-plugin-mysql-4.5.3-3mdv2010.0
lib64alsa-plugins-1.0.21-2mdv2010.0
gstreamer0.10-plugins-good-0.10.16-3mdv2010.0
kde4-nsplugins-4.3.2-3mdv2010.0
lib64vamp-plugin-sdk1-1.1b-5mdv2010.0
lib64opal3.6.6-plugins-3.6.6-1plf2010.0
lib64koplugin6-2.0.82-4mdv2010.0
gstreamer0.10-plugins-base-0.10.25-2mdv2010.0
libalsa-plugins-1.0.21-2mdv2010.0
lib64alsa-plugins-pulseaudio-1.0.21-2mdv2010.0

[moved from Software by spinynorman]

The 'Master' & 'Pcm' controls reset to varying degrees of loudness depending on what is played. No matter where I set them they always return to some preset settings usually after the sound stops, regardless of the sound being played. I really am at a loss on this one, so if anyone has an idea I will be grateful for it.

Thank You.

[moved from Software by spinynorman]

Thanks!

Sam

currently fighting with an issue that keeps me away from my kde.

When I try to login from graphical login screen I get a black screen including mouse arrow than flipping back to the loginscreen.

System was running stable and fine a day ago.

Any help apreciated!!

I would like to solve the problem. Reinstal is not my first option, because I do not want to run in the same problem again.

Details:

Mandriva Linux relase 2009.1 (Official) for i586

Kernel 2.6.29.6-desktop586-2mnb on a Dual-processor i686

graphic device is intel 810

What I tried to solve the problem:

login on console is possible

checked and cleared tmp folders for user and root

df reports more than 3.6G for / and 167G for /home

added a newuser and tried to login from graphic loginscreen without success

tried to startx as user or root on console without success

ends with:

error setting MTTR ... invalid argument (22)

nothing unusual in /etc/X11/xorg.conf (compared it with an old version in a tar archive)

just warnings in /var/log/Xorg.0.log no errors

regards /rhaas

Mandriva Spring 2009

64bit KDE

ATI HD 3300

[moved from Software by spinynorman]