http://rpm.nyvalls.se/

[moved from Installing Mandriva by spinynorman]

This time I get the following conflict message.

Any ideas?

thanks in advance

file /usr/lib/libksieve.la from install of libkdepim1-kmail-3.5.9-12mdv2008.1.i586 conflicts with file from package libkdepim2-common-3.5.9-9mdv2008.1.i586

file /usr/lib/libksieve.so.0.0.0 from install of libkdepim1-kmail-3.5.9-12mdv2008.1.i586 conflicts with file from package libkdepim2-common-3.5.9-9mdv2008.1.i586

This is available at the usual place http://www.mde.djura.org

You can directly access the 2008.0 rpms through:

for 32 bits -> http://www.mde.djura.org/index2008.1.html

for 64 bits -> http://www.mde.djura.org/index2008.1_64.html

have fun :)

Available at the usual place http://www.mde.djura.org

You can directly access the 2008.1 rpms through:

for 32 bits -> http://www.mde.djura.org/index2008.1.html

for 64 bits -> http://www.mde.djura.org/index2008.1_64.html

have fun :)

http://www.mde.djura.org

You can directly access the 2008.1 rpms through:

for 32 bits -> http://www.mde.djura.org/index2008.1.html

for 64 bits -> http://www.mde.djura.org/index2008.1_64.html

Have fun :)

Available at the usual place http://www.mde.djura.org

You can directly access the 2008.0 rpms through:

for 32 bits -> http://www.mde.djura.org/index2008.0.html

for 64 bits -> http://www.mde.djura.org/index2008.0_64.html

have fun :)

Available at the usual place http://www.mde.djura.org

You can directly access the 2008.0 rpms through:

for 32 bits -> http://www.mde.djura.org/index2008.0.html

for 64 bits -> http://www.mde.djura.org/index2008.0_64.html

have fun :)

Available at the usual place http://www.mde.djura.org

You can directly access the 2008.0 rpms through:

for 32 bits -> http://www.mde.djura.org/index2008.0.html

for 64 bits -> http://www.mde.djura.org/index2008.0_64.html

have fun,

Available at the usual place http://www.mde.djura.org for both arches

have fun, ;)

[moved from Software by spinynorman]

But when i tried to install OpenOffice Package, OO-draw get message about missing libjpeg.so

Qt3-devel package also installed.

How fix this problem?

Thanx

[root@cgomes ]# urpmi.addmedia MDE http://www.mde.djura.org/2008.0/RPMS with hdlist.cz

adding medium "MDE"

http://www.mde.djura.org/2008.0/RPMS/hdlist.cz

...retrieving failed: curl: (22) The requested URL returned error: 404

...retrieving failed: curl failed: exited with 22

unable to access hdlist file of "MDE", medium ignored

unable to update medium "MDE"

removing medium "MDE"

Unfortunately, after this installation, my system became very slow and unable to be an efficient multi-task environment (Firefox + anything else give an incredibly slow system).

I decided to come back to the last stable Mandriva kernel (2.6.17-14). My system is now as efficient as before.

I use Mandriva 2007.1 (spring) plus MDE packages. This is the first time I am disapointed by a MDE package.

Did somebody else try this new kernel ?

Have fun :)

...if not...call me an idiot lol

hhttp://www.mde.djura.org/index2008.0.html/

http://www.mde.djura.org/index2008.0_64.html/

Installation instructions are also available respectivily for both arches:

http://www.mde.djura.org/kde_install_2008.0_32.html

http://www.mde.djura.org/kde_install_2008.0_64.html

there is also IRC support in Freenode irc servers in channel #MDE.

Have fun :)

http://www.mde.djura.org/2007.1/RPMS/

http://www.mde.djura.org/2007.1_64/RPMS/

Installation instructions are also available respectivily for both arches:

http://www.mde.djura.org/kde_install_2007_32.html

http://www.mde.djura.org/kde_install_2007_64.html

there is also IRC support in Freenode irc servers in channel #MDE.

Have fun :)

[moved from Software - arctic]

This is available at the usual place http://www.mde.djura.org

You can directly access the rpms through:

for 32 bits -> http://www.mde.djura.org/2007.0/RPMS/

for 64 bits -> http://www.mde.djura.org/2007.0_64/RPMS/

have fun :)

http://www.mde.djura.org/2006.0/RPMS/arts-....0.mde.i586.rpm

...retrieving failed: curl: (22) The requested URL returned error: 404

http://www.mde.djura.org/2006.0/RPMS/libar....0.mde.i586.rpm

...retrieving failed: curl: (22) The requested URL returned error: 404

I notice it's looking for the rpm's in /RPMS/ instead of /RPMS/KDE-3.5.4/

I've copied the whole KDE dir to my hdd and made that a new urpmi source. wish me luck...

So, I am not able to connect automatically a USB key.

Are you aware of this problem ?

[moved from Hardware by spinynorman - welcome aboard :)]

gparted-0.3.3-2mde2007.0

and

qtparted-0.4.5-6mde2007.0

available at the usual place

Have fun partitioning :)

available at the usual place -> www.mde.djura.org

FlashPlayer-9.0.31.0-1mde2007.0.i586.rpm

have fun

so no when i finished the rc1 rpms i noticed that rc2 was just released

im updating my dkms based alsa rpms at once

hb

both for i586 and x86_64

Also you can find multimedia and network software.

This is available at the usual place http://www.mde.djura.org

You can directly access the rpms through:

for 32 bits -> http://www.mde.djura.org/2007.0/RPMS/

for 64 bits -> http://www.mde.djura.org/2007.0_64/RPMS/

Please don't forget to first read instructions before doing anything.

just check them out here http://sauerbraten.org/ and here http://red.planetarena.org/

Installed seemed to go OK - wondering if there are any specific pre-requesities from the flac MDE build.

First time I ran mythtv-setup it converted the database OK and mythbackend works fine and is still recording the existing scheduled stuff. Because mythbackend works fine, it leads me to think it's x/qt/graphical problem, but don't really know.

But - When I run mythtv-setup, it creates the x-window, builds some cached icons, then crashes.. no other errors that I'm able to identify.

Any help appreciated in how to identify further why it might be happening - is there an enhanced debug setting for mythtv-setup, or frontend?

any way of analysing the core file?

I also upgraded qt3 to the mde version at the same time as the myth-tv upgrade... wondering if I should push it back to the MDK standard version.. just clutching at straws really. (but struggling to do that cleanly)

I've attached my list of qt & Myth packages below - if it helps.

I already had to recover my libdbus file as with the MDE version too many other things broke... (but mythtv didn't work with the mde version either anyway)

Cheers!

aqhbci-qt-tools-1.0.5-0.beta.2mdk
libavahi-qt3_1-0.6.10-7.mdk2006.0.mde
libqt3-3.3.6-8.mdk2006.0.mde
pinentry-qt-0.7.2-2mdk
libqt3-devel-3.3.6-8.mdk2006.0.mde
libqt3-mysql-3.3.6-8.mdk2006.0.mde
libdbus-qt-1_0-0.23.4-5mdk
qt3-3.3.6-8.mdk2006.0.mde
mythtv-themes-0.20-2.mdk2006.0.mde
mythtv-0.20-2.mdk2006.0.mde
mythtv-debug-0.20-1.mdk2006.0.mde
libmyth0-0.20-2.mdk2006.0.mde
mythtv-backend-0.20-2.mdk2006.0.mde
myththemes-0.20-1.mdk2006.0.mde
mythtv-setup-0.20-2.mdk2006.0.mde
mythtv-frontend-0.20-2.mdk2006.0.mde

FlashPlayer-9.0.21.55-1.mdv2007.0.mde

kvirc-3.2.5-4mdv2007.0.mde

gimp-2.3.12-1.mdv2007.0.mde

amsn-0.97-0.svn20061030.1.mdv2007.0.mde

have fun :)

i've been trying to add my printer which is atached on winxp w/samba. The print wizard see's the printer a hp-750 and when i select ok the process fails w/cryptic "Failed to configure printer". I've tried several times and always the same result. I tried loooking thru the cups error log but could not see anything. I dont even know if problem is w/cups or mandriva. I updated to 1.2.1-4.mdk2006.0.mde but that hasnt helped. i attached the error log if someone has suggestions on how to troubleshoot this would be much appreciated.thanx

ps- sorry about the size of error_log but i turned on diagnose mode in cups and this is what i get...

error_log.txt

My machine is setup with standard Mandriva 2006 and then updated against the standard MDV 2006 update source and then updated against the PLF and the MDE sources.

I do not have a problem re-building the RPMS but I have come across a problem when installing the binaries. It is coming up with a message "gtk-sharp2-2.3.91-6rjm.i586 (due to unsatisfied mono(System.Drawing)[== 1.0.5000.0])". This is the same message that comes from the original package.

After furhter investigation I discovered that the libmono-runtime-1.1.15-5.mdk2006.0.mde.i586.rpm from http://www.mde.djura.org/2006.0/RPMS/ provides (rpm -q --provides) the following components:

mono(mscorlib) = 1.0.3300.0
mono(System) = 1.0.3300.0
mono(System.Data) = 1.0.3300.0
mono(System.Drawing) = 1.0.3300.0
mono(System.Web) = 1.0.3300.0
mono(System.Windows.Forms) = 1.0.3300.0
mono(System.Xml) = 1.0.3300.0
.....
libmono-runtime = 1.1.15-5.mdk2006.0.mde

and when I looked at the files in the rpm they are:

/usr/lib/mono/1.0/System.Drawing.Design.dll
/usr/lib/mono/1.0/System.Drawing.dll
/usr/lib/mono/2.0/System.Drawing.Design.dll
/usr/lib/mono/2.0/System.Drawing.dll
/usr/lib/mono/gac/System.Drawing
/usr/lib/mono/gac/System.Drawing.Design
/usr/lib/mono/gac/System.Drawing.Design/1.0.5000.0__b03f5f7f11d50a3a
/usr/lib/mono/gac/System.Drawing.Design/1.0.5000.0__b03f5f7f11d50a3a/System.Drawing.Design.dll
/usr/lib/mono/gac/System.Drawing.Design/1.0.5000.0__b03f5f7f11d50a3a/System.Drawing.Design.dll.mdb
/usr/lib/mono/gac/System.Drawing.Design/2.0.0.0__b03f5f7f11d50a3a
/usr/lib/mono/gac/System.Drawing.Design/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.Design.dll
/usr/lib/mono/gac/System.Drawing.Design/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.Design.dll.mdb
/usr/lib/mono/gac/System.Drawing/1.0.5000.0__b03f5f7f11d50a3a
/usr/lib/mono/gac/System.Drawing/1.0.5000.0__b03f5f7f11d50a3a/System.Drawing.dll
/usr/lib/mono/gac/System.Drawing/1.0.5000.0__b03f5f7f11d50a3a/System.Drawing.dll.mdb
/usr/lib/mono/gac/System.Drawing/2.0.0.0__b03f5f7f11d50a3a
/usr/lib/mono/gac/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
/usr/lib/mono/gac/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll.mdb

I went looking for a source RPM to investigate the problem further, but I could not find one.

My only other course of action it to remove the mde version of mono (this is my current line of attack), or upgrade to 2007 RC1 (and potentially spend the next 2-3 months getting everything right, as I want it.

Could someone help out, please?

I was wondering what your plans are with Mandriva 2007. Are you going to upgrade and then provide a similar service?

I also noticed a distinct lack of gnome-based apps in your collection. Personally, I don't use KDE, so KDE apps are realively useless to me, but the libraries you guys provide are up to date, so I can compile and install the latest apps that I want to install.

Keep up the good work.

i've hosed my setup tryiing to upgrade kernel. now i cant use the software module in MCC. i tried urpmi.removemedia -a and readded repo's but still when i click on anything in software it exits w/o screen appearing. I have the mde drakconf module installed. any idea's howto get Software working again w/o reinstall???

thanx

i'm getting constant activity on my cd/dvd laptop player and see in Device manager that the value "storage.media_check_enabled" is set to true. I want to toggle to false in hopes it will kill activity light. I tried this custom.fdi file:

?xml version="1.0" encoding="ISO-8859-1"?> <!-- -*- SGML -*- -->

<deviceinfo version="0.2">

<device>

<!-- Handle unnecessary polling of CD/DVD drive -->

<match key="storage.bus" string="ide">

<match key="storage.model" string="TOSHIBA DVD-ROM SD-R2102">

<match key="block.device" string="/dev/hdc">

<merge key="storage.media_check_enabled" type="bool">false</merge>

</match>

</match>

</match>

</device>

</deviceinfo>

but alas on reboot key is still true. I have put this file in /usr/share/hal/fdi/95userpolicy. Any ideas on how to toggle this value.

thanx...

problem here is since i upgraded kernel to 2.6.17 & hal to 0.5.7-12.mdk2006.0.mde on bootup my Intersil Prism2 mini-pci wireless card running Mandriva 2006 on Toshiba Satellite 1410 is recognized only about 1/2 the time. The other half I see that it refers to my wireless card as eth1 instead of eth0 and says cant find ant config file for device.I see a listing for pcmciautils-007-4mdk. Is this an update to pcmcia-cs that might solve my problem? The reason i say this is in /messages log i see this entry:

localhost kernel: pccard: PCMCIA card inserted into slot 0
Sep  3 17:24:40 localhost kernel: pcmcia: Detected deprecated PCMCIA ioctl usage from process: cardmgr.
Sep  3 17:24:40 localhost kernel: pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools.
Sep  3 17:24:40 localhost kernel: pcmcia: see [url=http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html]http://www.kernel.org/pub/linux/utils/kern...cia/pcmcia.html[/url] for details.
Sep  3 17:24:40 localhost kernel: cs: IO port probe 0xc00-0xcff: clean.
Sep  3 17:24:40 localhost last message repeated 2 times
Sep  3 17:24:40 localhost kernel: cs: IO port probe 0x100-0x4ff: excluding 0x378-0x37f 0x408-0x40f 0x480-0x48f 0x4d0-0x4d7
Sep  3 17:24:40 localhost last message repeated 2 times
Sep  3 17:24:40 localhost kernel: cs: IO port probe 0xa00-0xaff: clean.
Sep  3 17:24:40 localhost last message repeated 2 times
Sep  3 17:24:40 localhost kernel: cs: memory probe 0xa0000000-0xa0ffffff: clean.
Sep  3 17:24:40 localhost kernel: pcmcia: registering new device pcmcia0.0
Sep  3 17:24:40 localhost kernel: Floppy drive(s): fd0 is 1.44M
Sep  3 17:24:40 localhost kernel: FDC 0 is a post-1991 82077
Sep  3 17:24:40 localhost kernel: NET: Registered protocol family 17
Sep  3 17:24:40 localhost kernel: eth0: New link status: Disconnected (0002)
Sep  3 17:24:40 localhost kernel: eth0: New link status: Connected (0001)

It says interface will be removed unless upgrade to new tools

See also boot log:

Sep  2 18:17:30 localhost network: Shutting down interface eth1:  succeeded
Sep  2 18:17:31 localhost network: Shutting down loopback interface:  succeeded
Sep  2 18:17:31 localhost network: Disabling IPv4 packet forwarding:  succeeded
Sep  2 18:17:31 localhost network: Setting network parameters:  succeeded
Sep  2 18:17:31 localhost network: Bringing up loopback interface:  succeeded
Sep  2 18:17:31 localhost ifup: /bin/true
Sep  2 18:17:31 localhost ifup: e100 device eth0 does not seem to be present, delaying initialization.
Sep  2 18:17:32 localhost network: Bringing up interface eth0:  failed
Sep  2 18:17:32 localhost network: Bringing up interface eth1:  succeeded
Sep  2 18:17:32 localhost network: Bringing up interface sit0:  succeeded
Sep  2 18:27:23 localhost network: Shutting down interface eth1:  succeeded
Sep  2 18:27:23 localhost network: Shutting down loopback interface:  succeeded
Sep  2 18:27:23 localhost network: Setting network parameters:  succeeded
Sep  2 18:27:23 localhost network: Bringing up loopback interface:  succeeded
Sep  2 18:27:24 localhost ifup: /bin/true
Sep  2 18:27:24 localhost ifup: e100 device eth0 does not seem to be present, delaying initialization.
Sep  2 18:27:24 localhost network: Bringing up interface eth0:  failed
Sep  2 18:27:24 localhost network: Bringing up interface eth1:  succeeded
Sep  2 18:27:24 localhost network: Bringing up interface sit0:  succeeded

why does it refer to e100 driver for wireless eth0 interface?

Any other suggestions welcome ...thanx

First it could not find libraries.so.0 for dbus, dbus-glib and hal but after repairing the symlinks (no idea why they had got lost) I now get:

symbol lookup error: gnome-volume-manager: undefined symbol: hal_initialize

I have (lib)hal(1)- 0.5.7-12.mdk2006.0.mde installed and the rest is "mostly" a stock 2006.0 machine (I certainly have not deliberately played around with this sort of system stuff deliberately and still retain gnome-volume-manager-1.2.2-1mdk

What has gone wrong?

HB

Im naming it as a pre release since kde-3.5.4 still wasnt officially released, but it will in a few days.

regards,

I recently upgraded to your cups 1.2.1. After the upgrade my printer didn't work anymore. Cups says it is "off-line" and it seems that cups can't see my paralell port. I'm quite new to Linux and need help to get my printer working again.

regards

/HU

This is available at the usual place http://www.mde.djura.org

You can directly access the rpms through:

for 32 bits -> http://www.mde.djura.org/2006.0/RPMS/

for 64 bits -> http://www.mde.djura.org/2006.0_64/RPMS/

Please dont forget to first read intructions before doing anything.

Keep up the good work guys, well done!!!

this is still a pre-release since the official kde-3.5.3 still wasnt announced.

I recently reinstalled clean Mandriva 2006.0 (official) and then patched to 3.5.3 from MDE but now I get no KDM even though I selected it in MCC - it defaults to XDM and then won't log into KDE- gets stuck in a loop at the login screen. I used GDM and it will login to KDE and give a proper GUI login. Any suggestions how I can get KDM back up and running? If I go into failsafe from Lilo then init 3 then startx I get to KDE.

As a side note: my sound and ARTs isn't working either.

A couple of programs I used extensively from cooker was the latest versions of beagle, kino and kino-plugins. Is it possible for me to kindly make the request that those programs are back-ported to MDE?

Again, thank you for your consideration.

Woojin

There is actuallay 3 different version of unichrome implementations at the moment.

1. the one in xorg, currently not working

2, the one in http://sourceforge.net/projects/unichrome/ that is missing support for via xvmc harware acceleration

3, http://www.openchrome.org/ that supports both 3d and xvmc hardware support

I have built current xorg-x11-6.9-cvs20051127 rpms for mandriva 2006 with the openchrome version added.

I have also built the Mesa-6.4.1 that is included in xorg sourca and alse a dlms-drm built from the drm source included in xorg source.

This will provide the version of Mesa and drm that xorg is actually built against.

I have never understood why mandriva only provides an old version of Mesa = 5.

since both mesa and drm development moved to be part of xorg cvs years ago.

is it only natural to let xorg spec build both mesa and drm , like all other distros except

mandriva does.

my xorg also has radeon tv_output fix, sis 180905 driver from http://www.winischhofer.at/linuxsisvga.shtml and mgadriver 4.2.0 it does also contain fix for greek kb.

there is also an rpm for the The SiS Display Control Panel (sisctrl) for the sis driver.

The rpms is available in my repo at http://www.mde.djura.org/index2006.0.html