Hi all:
I have a VT8237A MB and there is a SATA HDD and SATA DVD-ROM with it.
And set the SATA Controller as [IDE] Mode in BIOS. (The device id of SATA controller is 5337)
Then build a "sata_via" patched driverdisk for the SATA Controller and install OS Mandriva 2007.1.
When I install Mandriva 2007.1 with driverdisk(Please see the following installation step), the OS installer will load default sata_via first.
After loading patched sata_via driver, it will conflict with default sata_via driver and load failed.
Is there any parameter or method to disable load default sata_via module in OS install screen "Boot Options" tag??
Any help is appreciate.
Following description is my install steps:
Stage 1:
1. Boot from Mandriva 2007.1 DVD disk with IDE DVD-ROM
2. OS install screen appeared
3. Press "F3"->"F5"->"Driver"->Select "Yes"->Press "Enter" to continue install OS procedure
4. Choose "fd0" to load patched sata_via module
5. System will show "Insmod fail" message
Stage 2:
1. Boot from Mandriva 2007.1 DVD disk with SATADVD-ROM
2. OS install screen appeared
3. Press "F3"->"F5"->"Driver"->Select "Yes"->Press "Enter" to continue install OS procedure
4. Choose "fd0" to load patched sata_via module
5. System will show "No CD-ROM Found" message